Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m |
m |
||
| Line 82: | Line 82: | ||
New pages; why and how to join | New pages; why and how to join | ||
| + | fusion 101 | ||
==Main Site== | ==Main Site== | ||
Revision as of 17:42, 2 April 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
- quick wooden fingers for routing etc, kerfhinge+tape?
- drill press XY base to mount clamp on.
- mounting options for normal plate. XY compatible?
- drill press lift; wedge format?
- calibrate depth cubes
- print cyclone exit cap , mod fan etc etc.
- cyclone; inlet, overflow/, outlet. assemble base/.
- tuck racking - BT?
- pallet cracker 2
router table;
- sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
- wedge router lift, m6 based.
http://www.exportandgeneral.co.uk/hackspace-community-group-insurance.php https://www.zurich.co.uk/en/charity-insurance/ppc/mens-shed-and-hack-space
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- T bar model needs prepping
laser;
- check alignment
- test high power defocussed scanning doing something
- calibrate output when possible.
- test optimal focal point - top left THEN others.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
coin sorter - dxf etc
spring test bits small box for cash/jam?
plxicorns treeshelf
-
Laser: russ re calibration etc. display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.
unipede port spirograph to dxf format etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card http://msraynsford.blogspot.co.uk/2016/09/shark-kits.html one panther.
dodecahedron coasters / trivets.
maybe separate logo into outer and inner parts. stencil for spanner?
test etching in grid form, two factors a time.
-
printers: post photos of the calibration tests, distil feedback.
Wiki
Main room page - add photos maybe?
New pages; why and how to join
fusion 101
Main Site
Dead links
Old content, general livening up. Needs to project active, lively space vs just-about-moving.
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
Demo stuff
Laser
kerf book coaster hinged box clock, obviously.
printers
marble run crossbow spirograph music box makerfair bot ?
