Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m |
m |
||
| Line 62: | Line 62: | ||
one panther. | one panther. | ||
| + | <pre> | ||
| + | Laser; | ||
| + | bed, flexible, reflective aluminium. iron sheet much preferable | ||
| + | bed lifters wobble wildly. caps fixed that. | ||
| + | hex mesh prevents airflow under work. | ||
| + | no crossflow of air due to limited inflow | ||
| + | wildly misaligned aperture on final mirror | ||
| + | lens dirty with tape test residue on top | ||
| + | lens UPSIDE DOWN | ||
| + | airflow valve position is such that it itself impedes flow even when fully open | ||
| + | 'KH' tube - could be just about anything from anywhere really. | ||
| + | water pump - suspend rather than try to shock absorb | ||
| + | laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture | ||
| + | |||
| + | |||
| + | |||
| + | PSU. ghost lines on scans caused by miswiring. | ||
| + | PSU, flyback transformer failed and arcing. | ||
| + | |||
| + | </pre> | ||
Revision as of 14:11, 10 April 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
- drill press XY base to mount clamp on.
- mounting options for normal plate. XY compatible?
- router/drill press lift; wedge format? hinged lever?
- calibrate depth cubes
- tuck racking - BT?
- pallet cracker 2
router table;
- sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
- wedge router lift, m6 based. hinge?
Jig rack for table saw and bandsaw bits. Along shelf below 'window'.
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- T bar model needs prepping
laser;
- check alignment
- test high power defocussed scanning doing something
- calibrate output when possible.
- test optimal focal point - top left THEN others.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
coin sorter - dxf etc
spring test bits small box for cash/jam?
plxicorns treeshelf
shelf for table saw jigs, featherboards etc same for bandsaw
laser blog post / annotate photograph of laser
-
Laser: russ re calibration etc. display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.
unipede port spirograph to dxf format etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card http://msraynsford.blogspot.co.uk/2016/09/shark-kits.html one panther.
Laser; bed, flexible, reflective aluminium. iron sheet much preferable bed lifters wobble wildly. caps fixed that. hex mesh prevents airflow under work. no crossflow of air due to limited inflow wildly misaligned aperture on final mirror lens dirty with tape test residue on top lens UPSIDE DOWN airflow valve position is such that it itself impedes flow even when fully open 'KH' tube - could be just about anything from anywhere really. water pump - suspend rather than try to shock absorb laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture PSU. ghost lines on scans caused by miswiring. PSU, flyback transformer failed and arcing.
dodecahedron coasters / trivets.
maybe separate logo into outer and inner parts. stencil for spanner?
test etching in grid form, two factors a time.
-
printers: post photos of the calibration tests, distil feedback.
Wiki
Main room page - add photos maybe?
New pages; why and how to join
fusion 101
Main Site
Old content, general livening up. Needs to project active, lively space. Diversity of interests & projects.
Continue grand fishing campaigns.
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
Demo stuff
Laser
kerf book coasters/trivets clock, obviously. claw - finish design. simple birdhouse? panther sign, claw jar?
printers
marble run spirograph music box
