2D printer

From ipswichmakerspace
Revision as of 20:14, 6 June 2017 by Leachj (Talk | contribs) (1 revision imported)

Jump to: navigation, search


Turn the printer on at the back, the switch is located at the back on the left hand side.

You will need to install the printer onto your machine, the printer shows up as a Bonjour printer, First Connect to the Makerspace network, for those with Macs, simply open the printers control panel and search, your should see the Dell printer listed and in most cases the default driver should work fine.

Windows - tbc

Linux - tbc