Difference between revisions of "October 6th Working Party"
From ipswichmakerspace
m |
|||
| Line 1: | Line 1: | ||
==Priority Tasks== | ==Priority Tasks== | ||
| − | * Sort and clean the workshop. | + | * <strike>Sort and clean the workshop.</strike> |
| − | * Sort out the corner by the door | + | * Sort out the corner by the door [part done] |
| − | * Clean the kitchen | + | * <strike>Clean the kitchen</strike> |
| − | * Clean the toilet | + | * <strike>Clean the toilet</strike> |
| − | * Hoover the main room floor | + | * Hoover the main room floor</strike> |
| − | * Sort out the electronic benches | + | * <strike>Sort out the electronic benches</strike> |
| − | * Take rubbish to the tip | + | * Take rubbish to the tip [part done] |
| − | * The Laser PSU needs properly attaching, and the new Air Assist Control System (TM) needs installing | + | * <strike>The Laser PSU needs properly attaching</strike>, and the new Air Assist Control System (TM) needs installing |
==Other Tasks== | ==Other Tasks== | ||
* Set up a network shared folder. Common software, learning resources, and other critical stuff (like games) could live there. | * Set up a network shared folder. Common software, learning resources, and other critical stuff (like games) could live there. | ||
| − | * Get the vinyl cutter working - some software has arrived, testing is needed. | + | * <strike>Get the vinyl cutter working - some software has arrived, testing is needed.</strike> |
* The PCs need some tinkering again; PC3/Centre (nearest grey cupboard) seems to only output VGA (or the monitor ignores DVI). It might be a BIOS setting issue; ignore the top graphics ports! | * The PCs need some tinkering again; PC3/Centre (nearest grey cupboard) seems to only output VGA (or the monitor ignores DVI). It might be a BIOS setting issue; ignore the top graphics ports! | ||
* PC2/Back (middle of the 3 PCs) seems to overscan; likely either graphics settings or monitor issue, but nothing obvious. DVI use may fix it. | * PC2/Back (middle of the 3 PCs) seems to overscan; likely either graphics settings or monitor issue, but nothing obvious. DVI use may fix it. | ||
| − | * Attach air conditioner outlet into Mr Laserducky's enclosure. | + | * <strike>Attach air conditioner outlet into Mr Laserducky's enclosure.</strike> |
| − | * Patch up Woodzilla front pockets. They've split out from the frame at the base. | + | * <strike>Patch up Woodzilla front pockets. They've split out from the frame at the base.</strike> |
* Swap front door camera. | * Swap front door camera. | ||
| − | * Fix concerningly squeaky workshop hatch. | + | * Fix concerningly squeaky workshop hatch.</strike> |
* We've had some donations of Misc Stuff In Boxes. Currently at the top right of Palletron, they need sorting and curating/defenestrating as required. | * We've had some donations of Misc Stuff In Boxes. Currently at the top right of Palletron, they need sorting and curating/defenestrating as required. | ||
* Tile the kitchen wall above the sink | * Tile the kitchen wall above the sink | ||
* Paint more of the ceiling - this is a condition of our lease. | * Paint more of the ceiling - this is a condition of our lease. | ||
Revision as of 21:49, 6 October 2018
Priority Tasks
-
Sort and clean the workshop. - Sort out the corner by the door [part done]
-
Clean the kitchen -
Clean the toilet - Hoover the main room floor</strike>
-
Sort out the electronic benches - Take rubbish to the tip [part done]
-
The Laser PSU needs properly attaching, and the new Air Assist Control System (TM) needs installing
Other Tasks
- Set up a network shared folder. Common software, learning resources, and other critical stuff (like games) could live there.
-
Get the vinyl cutter working - some software has arrived, testing is needed. - The PCs need some tinkering again; PC3/Centre (nearest grey cupboard) seems to only output VGA (or the monitor ignores DVI). It might be a BIOS setting issue; ignore the top graphics ports!
- PC2/Back (middle of the 3 PCs) seems to overscan; likely either graphics settings or monitor issue, but nothing obvious. DVI use may fix it.
-
Attach air conditioner outlet into Mr Laserducky's enclosure. -
Patch up Woodzilla front pockets. They've split out from the frame at the base. - Swap front door camera.
- Fix concerningly squeaky workshop hatch.</strike>
- We've had some donations of Misc Stuff In Boxes. Currently at the top right of Palletron, they need sorting and curating/defenestrating as required.
- Tile the kitchen wall above the sink
- Paint more of the ceiling - this is a condition of our lease.
