Talks

From ipswichmakerspace
Revision as of 10:31, 27 September 2018 by Dlammiman (Talk | contribs)

Jump to: navigation, search

The purpose of this page is to both announce and record talks to given. Anyone wishing or willing to give a talk should, ideally, contact Dave Lammiman, via a Facebook message, who will then come back to you to discuss scheduling etc. This page will be updated as plans materialise.

Current Plan for Talks

As outlined, the intention currently is to hold presentations on the third Tuesday of each month. As Presentations and dates are confirmed they will be posted on this page and it will be kept as up to date as is possible. Reminders will be posted but this Wiki page should be your main guide. Due to duration required, some practical workshops will have to be held on a Saturday or Sunday, but these are the exception, not the rule.


Tuesday 18th of September

Laser Lecture Episode Two - A practical introduction to the large laser cutter, when and how to use it.


Tuesday 16th October

Linux

A two part presentation brought to you by Tim Elliot and Jonathan Leach.

Tim and Jon will present Linux in a two-part harmonious counterpoint. Part 1, by Tim, aims to present Linux in its context - what it means, why you might want it, and invites you to try it on your machine (no laptops will be harmed during this section of the course).

In Part 2, Jon will present the behind the scenes fundamentals of Linux showing you the power of the terminal with its short sharp tools and why in the age of graphics so many IT professionals still choose to use the command line.


Tuesday 20th November

Basic Electronics for makers.

Presentation by Peter Onion


Tues 18th December

Randomness & physical entropy

Presentation by Sue Spence



2019

Tues 15th January

Laser Lecture Episode Two - A practical introduction to the large laser cutter, when and how to use it.

Presentation by Adam Reid



We are constantly looking for any subject at any level. I feel that introductory talks will be most popular initially (but then what would I know).

The subject and format of the presentation is the choice of the presenter, we are hoping to provide as wide a range of topics and levels as possible. We will endeavour to make available any facilities you may require to aid your presentation.

If you wish to present, or find out more, the first thing to do is contact Dave Lammiman via a Facebook message, this is essential as it should remove the possibility of memory failure or senile confusion. We can the communicate and sort out the details, dates etc.

Because of the disruption and re-organisation of the monthly talks I would appreciate it if any of the talks previously offered are still on offer I would be extremely grateful if the presenters could resubmit their topics to Dave Lammiman, via a Facebook message and we will attempt to find a suitable slot in the 2019 schedule. This is true for any new speakers wishing to present.




Talks volunteered

Please add any talks that you would like to volunteer to give (please include your name). These can be about any topic. There are two types of talks. Full length talks can be any duration. Lightning talks are lightweight 5 minute talks, it is likely that several of these would be grouped together.

Full Length Talks Offered

Vincent

  • Installing and maintaining Wordpress Websites.
  • Hosting specific talks. I know from personal experience that people looking for a "website" can get bamboozled by all the different terms - Hosting, Domain registration, Unix, Windows, Wordpress Ready, MySQL., PHP etc. So would love to do a talk on all the differences, how to identify a good provider etc.

Peter Onion

  • Talks on electronics (I do have a BSc in electronics) and "C" and Python programming including making GUIs with Gtk. Pis and Arduino interfacing also possible. For something different I can talk about 1960s British Computers as well

Interactive Workshops

Note that some of these suggestions may require payment of a fee for parts and materials, or that participants bring their own equipment.

  • Casting and Mouldmaking Crash Course
    Hosted by Dave Kirkby and Support Team, this is a two part workshop in which we will instruct you in various forms of mould-making for an object of your choice - or we have some suitable demonstration objects if you have none to hand. The second part of the course will be on casting items in resin, using the mould you made in part one.


Historical Talks Promised

  • Frank was due to be giving us an overview on the use of git and github
  • PHP part 2 - Vince
    This time Vince will cover, Form field authentication (using jQuery), Contact form with email output, Flat File Manipulation
  • Introduction to Linux (for Windows users) - Tim/Jon
  • Getting started with Arduino (the quick and easy way) - Frank Carver
  • Getting started with Arduino (the cheapest way) - Frank Carver


Talks we would like to see

Please add any talks or topics that you would like to see covered at a future meeting. This is a wish list so don't worry who is going to talk about this

  • Building a multirotor
    some sort of introduction into the various parts, options and capabilities.
  • Hardening a LAMP server
    How to harden an internet facing LAMP server such that it is sufficiently secure to put live on a home network
  • Surface-mount soldering
    Even for those familiar with traditional through-hole soldering, the techniques required to attach the newer, smaller, surface-mount components can be a scary prospect.
  • Making project enclosures
    It's easy enough to make a simple electronic or electro-mechanical project which just about works. However, making it robust enough to use again and again, and good-looking enough to show to people who don't care so much about how it works is a completely different set of skills. I'm sure some of the Makerspace crowd can manage this, but for the rest of us it's baffling.
  • Getting started with low-cost 3D design software
    While you can get a fairly long way with a 3D printer using other people's models, it becomes much more useful when you can design your own. Getting started with 3D design software is not at all obvious, though. It would be great to learn from those who have managed to find and work out how to use some low-cost 3D design software.
  • PID and control theory for robotics
    On the surface it seems easy to make a robot. Just connect some sensors, motors and servos to a microcontroller. The tricky bit comes when you try to make use of the sensor information to adjust the motors and servos. It's easy to move things too much or too little, too fast or too slow. This is where control theory comes in. It does involve some maths, but once you get a basic understanding, it makes it much easier to work out and fix what's wrong with your robot, and why it never seems to do what you want.


Past Talks Presented

  • Tuesday 21st August 2018 - Laser Lecture.
    The Mysterious Stranger held forth on the finer points of blasting objects with beams of light. Invaluable to anybody who wishes to use a laser cutter for just about anything.
  • Node-RED - Jon L (presented 26th February 2015)
    Node-RED is a tool for wiring together the internet of things and can be used to connect pretty much anything with an API to anything else with an API. This can create some powerful workflows and do some cool things.
  • SQL for beginners - Part One - Tim (presented 23rd April 2015)
    The first of a three part series into the basis of creating, using and managing SQL databases
  • SQL for beginners - Part Two - Tim (presented 28th May 2015)
    The second of a three part series into the basis of creating, using and managing SQL databases
  • PHP for beginners - Part 1 - Vince (presented 25th June 2015)
    This was a basic introduction to PHP, it went down very well, so there is likely to be a part 2 at some point. PHP
  • Introduction to through hole soldering - Keith Ellis (presented 24th September 2015)
    Moving an electronic design from breadboard to proto-board, or assembling a typical electronic kit, usually requires the ability to solder components into pre-drilled holes. This can be daunting for anyone new to soldering. A quick overview of through hole soldering, followed by a practical exercise, the tutorial can be seen here
  • Oscilloscopes 101 - Ben (presented 26th November 2015)
    A talk through what oscilloscopes are, what they do and how they can be used to fault find projects
  • Programming Arduino and Raspberry Pi on Windows with Visual Studio (presented 28th April 2016)
    A great talk by Alan Hume on using Microsoft Visual Studio to program both Arduino's and Raspberry Pi's
  • CakePHP - Tim (presented 26th May 2016)
    Demonstration of development framework CakePHP, Tim will demonstrate how CakePHP can create a dynamic, highly-functional website in minutes from the SQL definition of its database.
  • AutoDesk Fusion 360 walk through - Keith Ellis (presented 23rd June 2016)
    Fusion 360 is a free (to Makers/Students) 3D CAD/CAM design software which is easy to get into but with very advanced features. It can be used for produce simple 3D models to fully functioning mechanisms with joints and defined movement ranges. It has very good rendering abilities and can easily output files for 3D printers and laser cutters. This will be a very quick walk through to demonstrate some of the essential techniques to 3D modelling generally and also some of the Fusion specifics such as the Time Line. Link to presentation