Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m (→Misc Orphans) |
m |
||
| Line 5: | Line 5: | ||
| − | * wooden fingers for routing | + | * quick wooden fingers for routing etc, kerfhinge+tape? |
| − | + | * drill press clamp XY base to mount press on. | |
| − | * drill press clamp base | + | * mounting options for normal plate. XY compatible? |
| − | * drill press lift; <> format? modify and | + | * drill press lift; <> format? modify and reprint midlift |
* calibrate depth cubes | * calibrate depth cubes | ||
| + | * '''print laser aligner''' | ||
| + | * print cyclone exit cap , mod fan etc etc. | ||
| + | * make/bodge hose entry from tubery. | ||
| + | * cyclone; inlet, overflow/, outlet. assemble base/. | ||
| + | |||
router table; | router table; | ||
| − | * set up | + | * set up with a working router! |
| − | + | ||
* sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset? | * sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset? | ||
| − | * screw thread lift, <> format? | + | * screw thread lift, <> format again? m6 based. |
| − | |||
| − | + | table saw; | |
| + | *Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting. | ||
| + | *zero clearance inlay, test. | ||
| + | *sled | ||
| + | **runners | ||
| + | **t bar needs prepping | ||
| + | laser; | ||
| + | *check alignment | ||
| + | *make tapered measurement jigs and mark with stripe width | ||
| + | *test high power defocussed scanning | ||
| + | *calibrate output when possible. | ||
Main room page - add photos maybe? | Main room page - add photos maybe? | ||
| − | |||
| − | |||
| − | |||
| + | New pages; palletry, why and how to join? | ||
Revision as of 18:01, 16 March 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
- quick wooden fingers for routing etc, kerfhinge+tape?
- drill press clamp XY base to mount press on.
- mounting options for normal plate. XY compatible?
- drill press lift; <> format? modify and reprint midlift
- calibrate depth cubes
- print laser aligner
- print cyclone exit cap , mod fan etc etc.
- make/bodge hose entry from tubery.
- cyclone; inlet, overflow/, outlet. assemble base/.
router table;
- set up with a working router!
- sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
- screw thread lift, <> format again? m6 based.
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- t bar needs prepping
laser;
- check alignment
- make tapered measurement jigs and mark with stripe width
- test high power defocussed scanning
- calibrate output when possible.
Main room page - add photos maybe?
New pages; palletry, why and how to join?
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
'Main Room' needs a wiki page. In particular there are a handful of stray pages only linked via categories and something has to tie them together. The 'Equipment' category is about as readable as a dictionary.
Likewise the main page itself is borderline empty.
