Difference between revisions of "Wishlist"

From ipswichmakerspace
Jump to: navigation, search
m (Lottery Grant)
m
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
''(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)''
 
''(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)''
  
Originally this page was a simple listing of what we might want in a grant, but has grown into a comprehensively costed listing for application purposes.
+
Originally this page was a simple listing of what we might want in a grant, but has grown into a comprehensively costed listing for application purposes. Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.
  
 
The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!
 
The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!
  
'''NOTE:''' If you wish to add to the Wishlist proper, please head to the '''[[Wishlist#Lottery_Grant|end of the page]]''' - much of the current content above is frozen as a grant application is now in progress.  In particular this is where the [[#Hand_tools|hand tools]] list is brewing, to replace Steve's toolbag with our own set.
+
'''NOTE:''' If you wish to add to the Wishlist proper, please head to the '''[[Wishlist#Lottery_Grant|end of the page]]''' - much of the current content is frozen as a grant application is now in progress.  In particular this is where the [[#Hand_tools|hand tools]] list is brewing, to replace Steve's toolbag with our own set.
  
 
+
'''Council Grant wishlist/totals page''' is [[https://home.ipswichmakerspace.com/mediawiki/index.php?title=Wishlist&oldid=618 here]] if still needed for reference. The Wishlist is currently brewing the Lottery application, under the ''assumption'' that the Council Grant succeeded fully. Note that it is now slightly outdated as the lathe is no longer required, freeing ~£164.39 for other purposes (hopefully craft related ones, especially textiles, specifically dressmaking and other costumery).
 
+
Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.
+
  
 
David has promised a resin kitlist, this will go into Essential Materials when available. It's not a blocking number as we should hopefully have flexibility regarding what materials we buy. He's also suggested a casting workshop at some point this year.
 
David has promised a resin kitlist, this will go into Essential Materials when available. It's not a blocking number as we should hopefully have flexibility regarding what materials we buy. He's also suggested a casting workshop at some point this year.
Line 16: Line 14:
  
 
Options:
 
Options:
   Woodworking T&E (fleshed out)
+
   Woodworking T&E (Replacement hand tools, air filtration, bandsaw, radial arm drill, minimill for stretch)
   Main Room T&E (Rapid are percolating, and new list added.)
+
   Main Room T&E (Rapid kitlist is one bay's worth. Assuming one bay included in this grant ''for now'', for eventually three top notch bays in total)
   Maintenance and Improvement (glazing, shelving and carpeting costed. ''Roof and ventiliation needs quotes at some point.'')
+
   Maintenance and Improvement ('''Lighting needed''')
   Essential Materials (Wood, filament, resin, screws, solder, etc. ''Awaiting input from all concerned parties about woodstock, paints and finishes.'')
+
   Essential Materials (Same as last time - wood, filament, resin, screws, solder, etc. '''Requesting input from all concerned parties about woodstock, paints and finishes.''')
  
Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter. Please note that articles with * are items Adam has and can eventually long-term loan to the space.
+
Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter.  
 +
 
 +
'''Please do not change table structure'''. Javascript automatically updates '£subtotal' fields based on cell position/indexes.
  
'''Please do not change table structure'''. Javascript automatically updates '£subtotal' fields based on cell position/indexes. Currently this script just runs for me but it will probably be global eventually.
 
 
Heading +' Later' eg 'Woodworking T&E Later' is valid; it lets me keep things in the list that are for a later time/grant/too much for this one's budget/etc.
 
Heading +' Later' eg 'Woodworking T&E Later' is valid; it lets me keep things in the list that are for a later time/grant/too much for this one's budget/etc.
  
Line 38: Line 37:
 
|-
 
|-
  
! scope="row"| Planer / Thicknesser
+
! scope="row"| Hand tools
| Woodworking Machine
+
| Tools
| Woodworking T&E
+
| Workshop T&E
| Machine for turning rough stock into joinable uniform planks
+
| Replacement hand tools
| With a supply of pallets, this will provide us with as much lumber as we need for most purposes. Which machine is the best choice really depends how much budget we can throw at it... there are options either side, but cheaper you have very mixed reviews, or lose the planer / jointer capabilities. With this one we will need to buy or make a stand/trolley as well.
+
| Close estimate for mostly costed hand tool list + a few measurement tools.
| £346
+
| £200.00
| £346
+
| £200.00
| https://www.machinemart.co.uk/p/clarke-cpt1000-254mm-10-planer-thicknesser/
+
| [[#Hand_tools|hand tools]]
 
|-
 
|-
  
  
! scope="row"| Clarke CWL1000B 40" Wood Turning Lathe
+
! scope="row"| Angle Grinder Stand
| Woodworking Machine
+
| Tool
| Woodworking T&E
+
| Workshop T&E
| Machine for turning wood.
+
| Angle grinder + chop saw
| ''Insert Dead or Alive lyrics here''
+
| For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs.
| £164.39
+
| £21.23
| £164.39
+
| £21.23
| https://www.machinemart.co.uk/p/clarke-cwl1000b-wood-turning-lathe/
+
| https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785
|-
+
 
+
 
+
 
+
! scope="row"| Table vice
+
| Utility
+
| Woodworking T&E
+
| Flush vice for planing and general heavy duty holding
+
| We currently have but one vice, which can cause queues and logistical blockages, especially as it's right next to the power tool bench. This particular model has a dog too, allowing large sheets to be clamped horizontally using the bench itself.
+
| £53.99
+
| £53.99
+
| https://www.machinemart.co.uk/p/52pd-175mm-wood-workers-vice/
+
|-
+
 
+
 
+
! scope="row"| Angle gauge / inclinometer
+
| Measuring
+
| Woodworking T&E
+
| Calipers for angles.
+
| Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved.
+
| £16.59
+
| £16.59
+
| https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge
+
|-
+
 
+
 
+
! scope="row"| Depth gauge
+
| Measuring
+
| Woodworking T&E
+
| Calipers for depth.
+
| For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from.
+
| £16.99
+
| £16.99
+
| https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge
+
|-
+
 
+
 
+
 
+
 
+
! scope="row"| Carving Chisels
+
| Woodworking
+
| Woodworking T&E
+
| Detailed chisels for more than just straightforward wood removal
+
| For hand carving, lathe work, and detailing. Better quality tools are certainly available, but price escalates quickly.
+
| £21.99
+
| £21.99
+
| https://www.ebay.co.uk/itm/VonHaus-12pc-Chisel-Set-Precision-Wood-Carving-Sharpening-Stone-Storage-Pouch/272756351795
+
|-
+
 
+
! scope="row"| Face shield
+
| Utility, PPE
+
| Woodworking T&E
+
| For use when grinding etc
+
| The goggles, they do nothing!
+
| £6.99
+
| £6.99
+
| https://www.screwfix.com/p/face-shield-clear/6540d
+
|-
+
 
+
 
+
! scope="row"| Encompassing goggles
+
| Woodworking T&E
+
| Utility, PPE
+
| Gogges with sideeye protection
+
| Vented, and also wearable over glasses.
+
| £4.99
+
| £9.98
+
| https://www.screwfix.com/p/site-premium-safety-goggles/9186k
+
|-
+
 
+
 
+
 
+
! scope="row"| Disposable Gloves
+
| Utility, PPE
+
| Woodworking T&E
+
| 100 pack of disposable nitrile Gloves
+
| These also have the benefit of not reacting adversely with resin components
+
| £4.99
+
| £4.99
+
| https://www.screwfix.com/p/wallace-cameron-nitrile-powder-free-disposable-gloves-black-medium-100-pack/9515t
+
|-
+
 
+
 
+
! scope="row"| Lab coats or overalls
+
| Utility, PPE
+
| Woodworking T&E
+
| Protective clothing
+
| Useful for painting, resin work, ousting Amy, and other messy activities.
+
| £10-15. £12 * 2 ?
+
| £24
+
| Sources various depending on type. I have a contact who can embroider our logo on them if desired.
+
|-
+
 
+
! scope="row"| Magnet
+
| Utility
+
| Woodworking T&E
+
| Magnet
+
| Useful for finding/clearing nails from the workshop floor
+
| £5.39
+
| £5.39
+
| https://www.ebay.co.uk/itm/37-67-90KG-Recovery-Magnet-Hook-Strong-Sea-Fishing-Diving-Treasure-Hunting-NEW/311921068962
+
 
|-
 
|-
  
  
! scope="row"| Fubar
+
! scope="row"| Radial Drill
 
| Tool
 
| Tool
| Woodworking T&E
+
| Workshop T&E
| Multipurpose demolition tool
+
| Extendable powerful drill
| Exceptionally useful for breaking pallets down. Also effective against the undead.
+
| Deeper throat and greater depth. Also means the current drill can be dedicated and set up for a given purpose eg lowspeed metalwork.
| £30ish
+
| £326.00
| £30
+
| £326.00
| Example: https://www.ebay.co.uk/itm/STANLEY-STA155099-FatMax-Fubar-Utility-Bar-XL/352233983943
+
| https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928
|-
+
 
+
! scope="row"| Pallet Buster
+
| Tool
+
| Woodworking T&E
+
| Pallet prybar
+
| Lifts pallet boards with minimal splintering
+
| £25.99
+
| £25.99
+
| https://www.screwfix.com/p/roughneck-pallet-buster-demolition-bar-1100mm/6765x
+
|-
+
 
+
 
+
! scope="row"| Countersunk pilot drill bits
+
| Woodworking
+
| Woodworking T&E
+
| Drill bits
+
| With countersinks. Attached! Saves so much time.
+
| £7.89
+
| £7.89
+
| https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/
+
 
|-
 
|-
  
  
  
! scope="row"| Titanium step drills
+
! scope="row"| Riveter
 
| Tool
 
| Tool
| Woodworking T&E
+
| Workshop T&E
| Drill bits with multiple steps for incrementally larger holes.
+
| Hand-held riveter
| Useful for basically any material, and by nature will also deburr the holes. [* One is available]
+
| Also comes with variously sized rivets.
| £8.99
+
| £19.84
| £8.99
+
| £19.84
| https://www.amazon.co.uk/Zacro-Titanium-Drill-Automatic-Center/dp/B01J590QVE/
+
| https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786
 
|-
 
|-
  
  
! scope="row"| Coping / fret saw
+
! scope="row"| Workshop T&E
| Tool
+
| Woodworking T&E
+
| Deep throated saw for fiddly cutting tasks
+
| Currently we have no detail work saw aside from the jewelers saw, which is too detailed! *
+
| £10/15ish
+
| £12.50
+
| Eg: https://www.screwfix.com/p/bahco-301-ph-coping-saw/4659d or https://www.screwfix.com/p/bahco-fret-saw-5-130mm/5581k
+
|-
+
 
+
 
+
 
+
! scope="row"| Woodworking T&E
+
 
|
 
|
 
|  
 
|  
Line 224: Line 89:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
| Recent total: £756.67
+
|
 
|-
 
|-
  
 +
 +
! scope="row"| Minimill
 +
| Tool
 +
| Workshop T&E Stretch
 +
| A milling machine
 +
| Very versatile. Might be irrelevant if Ben lends his metal CNC?
 +
| £902.51
 +
| £902.51
 +
| https://www.axminster.co.uk/axminster-model-engineer-series-sx2-mini-mill-505099
 +
|-
  
  
! scope="row"| Cross Vise
+
! scope="row"| Cross Vise ''(hopefully council granted)''
 
| Utility
 
| Utility
| Woodworking T&E Stretch
+
| Workshop T&E Stretch
 
| A cross vice for the drill press.
 
| A cross vice for the drill press.
| Irreplacable for precision tasks.
+
| Irreplaceable for precision tasks.
 
| £47.98
 
| £47.98
 
| £47.98
 
| £47.98
Line 240: Line 115:
  
  
! scope="row"| Bobbin Sander
+
! scope="row"| Workshop T&E Stretch
| Machine
+
| Woodworking T&E Stretch
+
| A bobbin sander
+
| Sands curves and other odd shapes.
+
| £199.99
+
| £199.99
+
| https://www.screwfix.com/p/triton-tsps450-450w-oscillating-spindle-sander-240v/1417k
+
|-
+
 
+
 
+
! scope="row"| Woodworking T&E Stretch
+
 
|
 
|
 
|  
 
|  
Line 258: Line 122:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
| Recent total: £756.67
 
|-
 
 
 
 
! scope="row"| Engineers Calipers
 
| Measuring
 
| Woodworking T&E Later
 
| High calibre calipers.
 
| Useful for many tasks involving measurement, especially try-test work - in particular the earwigs are invaluable for hollow objects. *
 
| £14.39
 
| £14.39
 
| https://www.machinemart.co.uk/p/et153-3-piece-spring-caliper-set/
 
|-
 
 
 
! scope="row"| Bolt Cutters
 
| Tool
 
| Woodworking T&E Later
 
| Cutters for bolts and similar devices
 
| We lack anything more than tinsnips. *
 
| £12.99
 
| £12.99
 
| https://www.screwfix.com/p/forge-steel-bolt-cutters-30/3489c
 
|-
 
 
 
! scope="row"| Bench vice
 
| Utility
 
| Woodworking T&E Later
 
| Mountable vice and small anvil for metalwork & friends
 
| For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version]
 
| £28.79
 
| £28.79
 
| https://www.machinemart.co.uk/p/clarke-100mm-bench-vice-cvr100b/
 
|-
 
 
! scope="row"| Rasp and file set
 
| Tool
 
| Woodworking T&E Later
 
| For subtractive handwork, especially on woods and metals
 
| Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. *
 
| £20-60
 
| £40
 
| https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece)
 
|-
 
 
 
 
! scope="row"| Tap and die set
 
| Tool
 
| Woodworking T&E Later
 
| For making threaded holes and threaded things what goes in those holes
 
| Prices vary wildly depending where you ask versus what quality. [ * midrange set ]
 
| £10-50
 
| £30
 
| https://www.screwfix.com/p/hss-steel-tap-and-die-set-51pc/12834
 
|-
 
 
 
! scope="row"| Fine toothed sawblade
 
| Woodworking
 
| Woodworking T&E Later
 
| Fine blade for work requiring such things.
 
| The mitre saw blade is good for most purposes, but quite coarse as a result, and some projects require better. Many alternative blades are available.
 
| £17.59
 
| £17.59
 
| https://www.screwfix.com/p/erbauer-tct-saw-blade-254-x-30mm-80t/4260v
 
|-
 
 
 
 
! scope="row"| Woodworking T&E Later
 
 
|
 
|
|
 
|
 
|
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| Recent total: £143.76
 
 
|-
 
|-
  
Line 510: Line 295:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
| Recent total: £625.53
+
|
 
|-
 
|-
  
Line 535: Line 320:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
| Recent total: £83.80
+
|
 
|-
 
|-
  
Line 541: Line 326:
  
  
 +
! scope="row"| Air filtration unit
 +
| Fitting
 +
| Maintenance and Improvement
 +
| Air / dust filtration for the workshop
 +
| This can happily sit on the winch girder
 +
| £394.04
 +
| £394.04
 +
| http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481
 +
|-
  
! scope="row"| The Workshop Roof
+
! scope="row"| Lighting - cable trays
 
| Fixture
 
| Fixture
 
| Maintenance and Improvement
 
| Maintenance and Improvement
| Double glazing for the oversized skylight
+
| Main Room lighting
| See breakdown in section below. Sheeting + CLS.
+
| 5.45 per 3m tray; 11.5m*3 coverage needed.
| £
+
| £5.45
| £85.92
+
| £65.40
| [[Wishlist#The_Workshop_Roof]]
+
| https://uk.rs-online.com/web/p/cable-trays-baskets/7989414/
 
|-
 
|-
  
! scope="row"| Under Rafter Shelves
+
! scope="row"| Lighting - wiring
 
| Fixture
 
| Fixture
 
| Maintenance and Improvement
 
| Maintenance and Improvement
| Shelves and casterboards for the triangular dead zone
+
| Main Room lighting
| See breakdown in section below. Ply, CLS, Casters, screws.
+
| Reel of wire - ''price currently invented''
| £
+
| £50
| £221.74
+
| £50
| [[Wishlist#The_Under_Rafter_shelves]]
+
|  
 
|-
 
|-
  
 +
! scope="row"| Lighting - light fixtures
 +
| Fixture
 +
| Maintenance and Improvement
 +
| Main Room lighting
 +
| Actual lights - are bulbs included? - ''price currently invented''
 +
| £150
 +
| £150
 +
|
 +
|-
  
! scope="row"| Oven
+
! scope="row"| Workshop Ventilation
 
| Fitting
 
| Fitting
 
| Maintenance and Improvement
 
| Maintenance and Improvement
| An oven for the kitchen. Or we could install it in the toilet. Either way it's an oven.
+
| Air in/extraction for the workshop
| See section below.
+
| Extraction fans would probably have to be fitted through the window in each side. Landlord has agreed to fund half cost of fitting. ''Number completely invented.''
| £0
+
| £100
| £0
+
| £100
| [[Wishlist#An_oven]]
+
|  
 
|-
 
|-
 +
 +
  
  
Line 603: Line 408:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
| Recent total: £635.04
+
|
 
|-
 
|-
  
  
! scope="row"| Shrapnel kits
+
! scope="row"| Laser Materials
 
| Consumables
 
| Consumables
| Essential Materials Stretch
+
| Essential Materials
| Kits of bits
+
| Laser food
| Nuts, bolts, screws, nails. Useful stuff that we usually mug Steve for.
+
| Everything that the Laser eats. ''Notably no plywood currently.''
| £59.96
+
| £128.60
| £59.96
+
| £128.60
 
| See breakdown below [[Wishlist#Materials_.2F_Consumables.]]
 
| See breakdown below [[Wishlist#Materials_.2F_Consumables.]]
 
|-
 
|-
 +
  
 
! scope="row"| Component kits
 
! scope="row"| Component kits
 
| Consumables
 
| Consumables
| Essential Materials Stretch
+
| Essential Materials
 
| Components
 
| Components
 
| Misc assorted components which we mostly lack, at least that we can find.
 
| Misc assorted components which we mostly lack, at least that we can find.
Line 627: Line 433:
 
|-
 
|-
  
! scope="row"| Essential Materials Stretch
+
 
 +
! scope="row"| Essential Materials
 
|
 
|
 
|  
 
|  
Line 634: Line 441:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
| Recent total: £79.58
+
|
 
|-
 
|-
  
Line 656: Line 463:
  
 
  - Shrapnel kits ('''Total £59.96''');
 
  - Shrapnel kits ('''Total £59.96''');
  https://www.screwfix.com/p/easyfix-round-oval-bright-nails-assorted-pack-x-4kg-pack/14989 £15.99 Nails. Lots.
+
 
  https://www.screwfix.com/p/silverscrew-pz-double-countersunk-woodscrews-grab-pack-1000-pcs/67663 £11.99 1000 screws
+
  https://www.screwfix.com/p/easyfix-bright-zinc-plated-mixed-machine-screws-750-piece-set/8386k £14.99 Machine screws
+
  https://www.screwfix.com/p/easyfix-bright-zinc-plated-mixed-bolts-nuts-washers-pack-500-piece-set/2526k £16.99 Nuts, bolts, washers
+
  
 
  - Component kits ('''Total: £19.62'''); (Resistors and LEDs we're bloody swimming in.)
 
  - Component kits ('''Total: £19.62'''); (Resistors and LEDs we're bloody swimming in.)
  https://www.ebay.co.uk/itm/100x-10-value-Variable-Resistors-Potentiometer-Assortment-Kit-Box-500ohm-Pop/302541252030 £2.98
+
 
  https://www.ebay.co.uk/itm/Top-BC337-BC547-10Values-x20-200pcs-NPN-PNP-Power-Transistor-Assortment-Kit-Box/172972931649 £2.27
+
  https://www.ebay.co.uk/itm/Lot-of-1000Pcs-Set-Kits-50values-50V-Ceramic-Capacitor-Assorted-Kit-Assortment/172645382890 ? £3.38
+
  https://www.ebay.co.uk/itm/125Pcs-1uF-electrolytic-capacitors-2200uF-25-Values-assorted-assortment-Kit-Set/282168307920 £3.00
+
  https://www.ebay.co.uk/itm/300-Pieces-Assortment-Set-2V-39V-30-Values-1-2W-0-5W-Zener-Diode-Assorted-Kit/381536097272 £2.57
+
  https://www.ebay.co.uk/itm/140pcs-14Types-Momentary-Tact-Tactile-Push-Button-Switch-SMD-Dip-Pushbutton-Set/263407888406 £2.55
+
 
   https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 !
 
   https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 !
 
   https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99
 
   https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99
  
  - Laser ply, mdf, acrylic and friends. Laser ply still needs adding here
+
  - Laser ply, mdf, acrylic and friends. Laser ply still needs adding here ('''Total: £128.60''')
 
   https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80  
 
   https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80  
 
   https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00
 
   https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00
Line 701: Line 500:
 
It may be worth investing in a 3D printer that allows something otherwise new, eg a huge print bed, or multiple extruders. In particular, soluble filament would open new doors.
 
It may be worth investing in a 3D printer that allows something otherwise new, eg a huge print bed, or multiple extruders. In particular, soluble filament would open new doors.
  
The Roof, and ventilation. Both need quotes as said elsewhere.
+
 
  
 
Lesser importance:
 
Lesser importance:
  
A sewing machine has been suggested in the past. One could be rescued from freecycle mayhaps.
 
  
Small craft tools. See Grants page.
 
  
Screen printing equipment. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably interest could research this I'd appreciate it, I'm oversaturated with research as it is.
+
Small craft tools. To be costed.
  
A dehumidifier might help in the workshop. Unsure though, given the scale of the problem...
+
Screen printing equipment. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably interest could research this I'd appreciate it, I'm oversaturated with research as it is.
  
 
A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.
 
A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.
Line 717: Line 514:
 
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.
 
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.
  
The grinder is currently pretty useless. We could expand it with a range of wheels to allow cleaning, abrading, sharpening and polishing - we also need to fit a guard and mount the thing though, it likes to go for a walk and spit firey sparks about the place.
 
https://www.machinemart.co.uk/c/grinding--polishing-wheels/?p=1&c=30&s=pricelowhigh
 
 
Resin paraphrenalia. Aside from a load of pots and mixers, we'd need scales, gloves, and sheet foam to make the moulds from. Long-term consumables here are things like dyes, mould release agents, of which only a small amount is used per cast. Also plaster of paris and a ton of bandages / rags / paper would be a sensible stock item. They're cheap and used for exomoulds and mean much less resin actually needs to be used per item. We would also need expendable paintbrushes here too.
 
 
Misc shared consumables; glues, tapes, screw, nails, nail gun refills, wire and so forth. Again not sure it's worth listing.
 
 
Simplify3D was suggested as a potential purchase a while ago, but my research so far suggests that slic3r Prusa edition is probably better, and of course, free. Simplify3D ''seem'' to be coasting on reputation and not actively developing or bugfixing. Citation: http://www.akeric.com/blog/?p=4164
 
  
 
==Building infrastructure==
 
==Building infrastructure==
Line 730: Line 519:
 
For grants that are usable for construction materials. Need to measure roof area, carpet area, and rafter shelf length and height. Check for damp issues under there too...
 
For grants that are usable for construction materials. Need to measure roof area, carpet area, and rafter shelf length and height. Check for damp issues under there too...
  
===The Workshop Roof===
+
[[File:Workshop_shelves.png|400px|thumb|right|Artist's impression of proposed shelving. Rumours of a magic carpet launch silo are entirely unsubstantiated.]]
Remove the polystyrene and start again. Off of the top of my head, we need a damp membrane, insulation that isn't flammable (celotex, kingspan etc), and some plywood. This is not my area so I hesitate to commit numbers to paper based on guesswork, as they have a habit of becoming more permanent than anticipated. See previous requests for getting quotations/advice on this.
+
  
Area is 29.36m2 and 22.73m2 for the nonwindowed and windowed sides respectively. [http://www.wickes.co.uk/Celotex-50mm-High-Performance-Insulation-Board-1200-x-2400mm/p/190544 'Celotex 50mm High Performance Insulation Board 1200 x 2400mm'] is £13.19 per m2, giving '''£685.88'''. This does not include any calculations for board size, wastage etc - the number is meant to be a guide only. We also need supporting battens (ripped CLS?), some sort of damp handling membrane probably, and some cheap plywood to cover it. And of course someone to install it. My research is giving mixed noise about whether we need a breather membrane on the outside, a vapour control layer on the inside, or both. [http://www.wickes.co.uk/Wickes-Treated-Sawn-19-x-32-x-3000mm/p/9000036476 Breather membrane] is £1.35 per m2; '''£71.55'''.  [https://www.roofingsuperstore.co.uk/product/powerlon-ultrablock-200-thermo-reflectiv-vcl-50m-x-1.6m-roll.html Vapour barrier] is '''£84.26'''. [http://www.wickes.co.uk/Wickes-Non-Structural-Hardwood-Plywood-5-5-x-1220-x-2440mm/p/110117 Plywood] is £6.71 per m2; '''£355.63'''! Given how easy it is to whack and jab the roof while moving wood around, we likely do need the armour, although arguably we could get away with leaving the extremeties. Insulation full of holes is nobody's friend. ''No particular recommendation is given or implied for these products or insulation strategy!''
 
 
Completely useless and entirely bodgespecced total for materials (not including battens); '''£1,197.32'''
 
 
We could however double glaze the window ourselves. 1700mm * 3600mm [https://www.roofingsuperstore.co.uk/polycarbonate-sheets-cut-to-size.html polycarbonate sheeting] is '''£80.92''', plus a bit of rip cut & damp treated CLS to frame it. Assume 2 CLS'; £5
 
 
 
[[File:Workshop_shelves.png|400px|thumb|right|Artist's impression of proposed shelving. Rumours of a magic carpet launch silo are entirely unsubstantiated.]]
 
 
===The Under Rafter shelves===
 
===The Under Rafter shelves===
  
Line 762: Line 542:
 
The uncarpeted area is 5.6M by 8.8M. Tiles are .5M so rounding up to 6 by 9; halftiles will mean we have some left over but a few spares are not a bad thing.
 
The uncarpeted area is 5.6M by 8.8M. Tiles are .5M so rounding up to 6 by 9; halftiles will mean we have some left over but a few spares are not a bad thing.
  
In total, £11.76 per square meter for 54 square meters ... '''£635.04''' Can we just 3d print ourselves some carpet? It'll be cheaper. I suppose we don't need to do the whole area with one grant either, which is a handy way to fill 'spare change'.
+
In total, £11.76 per square meter for 54 square meters ... '''£635.04'''  Facebook Marketplace seems an erratic but good value source of cheap tiles.
  
===An oven===
 
I'm going to say '''£150''' as a working figure; feel free to be more specific. https://www.currys.co.uk/gbuk/household-appliances/cooking/ovens/335_4215_31936_xx_xx/1_20/price-asc/100-400_xx_8_xx_5-6-7-8-9-10-11-12-13-criteria.html
 
 
Update, Steve has an oven pending deployment, we're waiting on a gas plumbing quote.
 
 
Valuation left as it could be used for match funding costs.
 
  
 
==Overheads==
 
==Overheads==
Line 800: Line 574:
 
== The 'Magic Money Wand' Section==
 
== The 'Magic Money Wand' Section==
  
If the banking fairy rains upon us:
 
 
 
A lathe - can the floor support this? They are also bloody big. Update: I've found a few small options, £600+ for metal. Do we really want a metalworking lathe? Cost aside, swarf is a bloody nightmare, and if someone starts knocking out AK47s then I for one do not wish the paperwork.
 
 
Better bandsaw, with a deeper throat and more welly.
 
  
A serious 3d printer. Ideas are welcome!
 
  
 
== Lottery Grant ==
 
== Lottery Grant ==
Line 813: Line 580:
  
 
*Main room electronics bays. ''Assuming'' the same as last time - '''£525.60'''.
 
*Main room electronics bays. ''Assuming'' the same as last time - '''£525.60'''.
*Basic workshop toolkit - about '''£200''', see below.
+
*Basic workshop toolkit - about '''£200''' when including measuring gubbins, see below.
 
*Overheads. As needed to fill numbers, up to half of the grant or so.
 
*Overheads. As needed to fill numbers, up to half of the grant or so.
 
*The workshop roof. Rough estimate but quotes are needed - this might not make it into the grant application but we should still have the information and option. '''£1,500-£2,500'''
 
*The workshop roof. Rough estimate but quotes are needed - this might not make it into the grant application but we should still have the information and option. '''£1,500-£2,500'''
 
*Air filtration unit - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 '''£394.04'''
 
*Air filtration unit - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 '''£394.04'''
*Serious Bandsaw - '''£479.00'''. https://www.toolstop.co.uk/makita-lb1200f-band-saw-305mm-240v-p14467
 
  
 
Non-critical but lovely:
 
Non-critical but lovely:
Line 827: Line 593:
 
*Lighting in the main room
 
*Lighting in the main room
 
*Ventilation fan for the workshop - landlord has offered to half-fund this!
 
*Ventilation fan for the workshop - landlord has offered to half-fund this!
*Gas/Oven fitting. If this is already completed then the cost cannot be reclaimed.
 
  
 +
''Which consumables? Same as last time?''
  
 
===Main Room Additions===
 
===Main Room Additions===
Line 844: Line 610:
 
*Wirework
 
*Wirework
 
*Papercraft
 
*Papercraft
 +
*Painting/finishing. Brushes, pallets and solvents etc.
  
 
===Workshop Equipment===
 
===Workshop Equipment===
  
*Digital calipers - the duels for the only metal set are getting out of hand.
 
*Metal detector - for scanning for nails in anything going near the thicknesser. Example:  http://www.ebay.co.uk/itm/New-Portable-Hand-Held-Metal-Security-Detector-Super-Scanner-Meter-OL2-/172959417810?_trksid=p2349526.m4383.l4275.c10
 
*Angle grinder stand - for heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs. https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785
 
  
 
====Hand tools====
 
====Hand tools====
Line 855: Line 619:
 
Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available.
 
Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available.
  
   [http://www.wilko.com/all-hand-tools/wilko-combination-square-305mm/invt/0209181 Wilko Combination Square 305mm] £6.00
+
   [http://www.wilko.com/all-hand-tools/wilko-combination-square-305mm/invt/0209181 Wilko Combination Square 305mm] * 2 £12.00
 
   [http://www.wilko.com/all-hand-tools/wilko-centre-punch-2pieces/invt/0343918 Wilko Centre Punch 2pieces] £2.75
 
   [http://www.wilko.com/all-hand-tools/wilko-centre-punch-2pieces/invt/0343918 Wilko Centre Punch 2pieces] £2.75
 
   [http://www.wilko.com/all-hand-tools/wilko-bradawl-140mm/invt/0209298 Wilko Bradawl 140mm] £1.50
 
   [http://www.wilko.com/all-hand-tools/wilko-bradawl-140mm/invt/0209298 Wilko Bradawl 140mm] £1.50
Line 877: Line 641:
 
   [http://www.wilko.com/all-hand-tools/wilko-wood-chisel-set/invt/0343911 Wilko Wood Chisel Set] £6.00
 
   [http://www.wilko.com/all-hand-tools/wilko-wood-chisel-set/invt/0343911 Wilko Wood Chisel Set] £6.00
 
   [http://www.wilko.com/all-hand-tools/wilko-straight-cut-aviation-snips-10in/invt/0209105 Wilko Straight Cut Aviation Snips 10in] £5.50
 
   [http://www.wilko.com/all-hand-tools/wilko-straight-cut-aviation-snips-10in/invt/0209105 Wilko Straight Cut Aviation Snips 10in] £5.50
 +
  [http://www.wilko.com/all-hand-tools/wilko-tri-and-mitre-square-100-and-200mm/invt/0209549 Tri mitre square] £4.50
 
   [http://www.wilko.com/all-hand-tools/wilko-interior-mallet-16oz/invt/0343403 Wilko Interior Mallet 16oz] £4.50
 
   [http://www.wilko.com/all-hand-tools/wilko-interior-mallet-16oz/invt/0343403 Wilko Interior Mallet 16oz] £4.50
 
   [http://www.wilko.com/all-hand-tools/wilko-sledge-hammer-3lb/invt/0343401 Wilko Sledge Hammer 3Lb] £12.00
 
   [http://www.wilko.com/all-hand-tools/wilko-sledge-hammer-3lb/invt/0343401 Wilko Sledge Hammer 3Lb] £12.00
Line 883: Line 648:
 
Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a heap on the floor.
 
Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a heap on the floor.
  
Current total '''£154.75'''.
+
Current total '''£165.25'''.
  
I'd suggest that we keep Steve's toolbag around for now, but that any tools used from it are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.
+
I'd suggest that we keep Steve's toolbag around for now, along with mine, but that any tools used from either are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.
  
 
Other useful related things:
 
Other useful related things:
http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398
 
  
*Speed square
+
* http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398 '''£9.99'''
*Tri/mitre square
+
* Metric speed square https://www.ebay.co.uk/itm/7-Metric-Aluminum-Alloy-Speed-Square-Roofing-Triangle-Angle-Protractor-Ruler/132389623025?epid=916183692&hash=item1ed30954f1:g:Wt4AAOSw9hdaALFK '''£4.31'''
*More combi squares so the above widget doesn't need constant mode swapping
+
* Dedicated workshop digital calipers ; https://www.ebay.co.uk/itm/Digital-Vernier-Caliper-Stainless-Steel-Gauge-LCD-Measuring-Tool-Caliper-Gauge/152611671649 '''£9.80''' (or £1 cheaper from China)
*Dedicated workshop digital calipers ; common frustration point is the one good pair needed in two rooms at once
+
  
 
[[Category: Finance]] [[Category: Equipment]]
 
[[Category: Finance]] [[Category: Equipment]]

Latest revision as of 19:43, 4 November 2018

(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)

Originally this page was a simple listing of what we might want in a grant, but has grown into a comprehensively costed listing for application purposes. Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.

The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!

NOTE: If you wish to add to the Wishlist proper, please head to the end of the page - much of the current content is frozen as a grant application is now in progress. In particular this is where the hand tools list is brewing, to replace Steve's toolbag with our own set.

Council Grant wishlist/totals page is [here] if still needed for reference. The Wishlist is currently brewing the Lottery application, under the assumption that the Council Grant succeeded fully. Note that it is now slightly outdated as the lathe is no longer required, freeing ~£164.39 for other purposes (hopefully craft related ones, especially textiles, specifically dressmaking and other costumery).

David has promised a resin kitlist, this will go into Essential Materials when available. It's not a blocking number as we should hopefully have flexibility regarding what materials we buy. He's also suggested a casting workshop at some point this year.

Budget category is for grant purposes, and automatic totalling. By the same token Cost is cleaned line cost eg 3 * goggles at '£3-5ish' == 3*4 == £12. For specifically costed items that only one are needed of, this is a duplicate of Price.

Options:

 Woodworking T&E (Replacement hand tools, air filtration, bandsaw, radial arm drill, minimill for stretch)
 Main Room T&E (Rapid kitlist is one bay's worth. Assuming one bay included in this grant for now, for eventually three top notch bays in total)
 Maintenance and Improvement (Lighting needed)
 Essential Materials (Same as last time - wood, filament, resin, screws, solder, etc. Requesting input from all concerned parties about woodstock, paints and finishes.)

Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter.

Please do not change table structure. Javascript automatically updates '£subtotal' fields based on cell position/indexes.

Heading +' Later' eg 'Woodworking T&E Later' is valid; it lets me keep things in the list that are for a later time/grant/too much for this one's budget/etc.

Item Type Budget Category Description Rationale / Notes Price Cost URL
Hand tools Tools Workshop T&E Replacement hand tools Close estimate for mostly costed hand tool list + a few measurement tools. £200.00 £200.00 hand tools
Angle Grinder Stand Tool Workshop T&E Angle grinder + chop saw For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs. £21.23 £21.23 https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785
Radial Drill Tool Workshop T&E Extendable powerful drill Deeper throat and greater depth. Also means the current drill can be dedicated and set up for a given purpose eg lowspeed metalwork. £326.00 £326.00 https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928
Riveter Tool Workshop T&E Hand-held riveter Also comes with variously sized rivets. £19.84 £19.84 https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786
Workshop T&E Subtotal: £subtotal
Minimill Tool Workshop T&E Stretch A milling machine Very versatile. Might be irrelevant if Ben lends his metal CNC? £902.51 £902.51 https://www.axminster.co.uk/axminster-model-engineer-series-sx2-mini-mill-505099
Cross Vise (hopefully council granted) Utility Workshop T&E Stretch A cross vice for the drill press. Irreplaceable for precision tasks. £47.98 £47.98 https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/
Workshop T&E Stretch Subtotal: £subtotal
Soldering Station Tool Main Room T&E Steve’s Kitlist Atten ST-60 Premium Intelligent Soldering Station 60W £82.15 £82.15 https://www.rapidonline.com/85-6924
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-0.8 900M Series Soldering Tip Chisel 0.8mm £2.99 £2.99 https://www.rapidonline.com/85-6942
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-2.4 900M Series Soldering Tip Chisel 2.4mm £2.99 £2.99 https://www.rapidonline.com/85-6938
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-2C 900M Series Soldering Tip Sloped 2mm £2.99 £2.99 https://www.rapidonline.com/85-6944
Tip Cleaner Tool Main Room T&E Steve’s Kitlist Xytronic 460 Brass Wool Solder Tip Cleaner £4.77 £4.77 https://www.rapidonline.com/85-0626
Tip Cleaner Refill Consumable Main Room T&E Steve’s Kitlist Xytronic 459 Brass Wool Solder Tip Cleaner Refill £1.67 £1.67 https://www.rapidonline.com/85-0628
Solder Consumable Main Room T&E Steve’s Kitlist Rapid Solder Wire 60/40 22SWG 0.7mm 100g Reel £4.67 £4.67 https://www.rapidonline.com/85-0592
Solder Consumable Main Room T&E Steve’s Kitlist Rapid Lead-Free Solder Wire 22SWG 0.7mm 100g Reel £5.09 £5.09 https://www.rapidonline.com/85-1166
Pliers Tool Main Room T&E Steve’s Kitlist CK Tools T3889 Ecotronic ESD Long Snipe Nose Pliers £9.99 £9.99 https://www.rapidonline.com/93-3421
Cutters Tool Main Room T&E Steve’s Kitlist CK Tools T3887 Ecotronic ESD Side Cutters £10.40 £10.40 https://www.rapidonline.com/93-3419
Lamp Tool Main Room T&E Steve’s Kitlist Xytronic JF-33CB Superior Illuminated Lamp £69.33 £69.33 https://www.rapidonline.com/86-3333
Power Supply Tool Main Room T&E Steve’s Kitlist Uni-T UTP3705S 0-32V 5A DC Power Supply 2 Channel £178.94 £178.94 https://www.rapidonline.com/85-4048
Multimeter Tool Main Room T&E Steve’s Kitlist Uni-T Intelligent Digital Multimeters UT71B £118.73 £118.73 https://www.rapidonline.com/85-4065
Screwdriver Set Tool Main Room T&E Steve’s Kitlist Wera 05030170001 1578A/6 6-Piece ESD Kraftform Micro Screwdriver Set £20.06 £20.06 https://www.rapidonline.com/54-7139
Ruler Tool Main Room T&E Steve’s Kitlist CK Tools T3530 12 Steel Rule 300mm/12" £6.23 £6.23 https://www.rapidonline.com/86-1480
Stabby Thing Tool Main Room T&E Steve’s Kitlist Stanley 0-10-150 SM9 Snap Off Blade Knife 9mm £1.82 £1.82 https://www.rapidonline.com/86-0054
Refill for Stabby Thing Consumable Main Room T&E Steve’s Kitlist Stanley 0-11-300 Snap Off Replacement Blades 9mm - Pack Of 10 £2.78 £2.78 https://www.rapidonline.com/86-0055
Main Room T&E Subtotal: £subtotal
Filament Consumable Main Room T&E Stretch Printer Filament 4 Rolls of filament £20.95 £83.80 https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp
Main Room T&E Stretch Subtotal: £subtotal
Air filtration unit Fitting Maintenance and Improvement Air / dust filtration for the workshop This can happily sit on the winch girder £394.04 £394.04 http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481
Lighting - cable trays Fixture Maintenance and Improvement Main Room lighting 5.45 per 3m tray; 11.5m*3 coverage needed. £5.45 £65.40 https://uk.rs-online.com/web/p/cable-trays-baskets/7989414/
Lighting - wiring Fixture Maintenance and Improvement Main Room lighting Reel of wire - price currently invented £50 £50
Lighting - light fixtures Fixture Maintenance and Improvement Main Room lighting Actual lights - are bulbs included? - price currently invented £150 £150
Workshop Ventilation Fitting Maintenance and Improvement Air in/extraction for the workshop Extraction fans would probably have to be fitted through the window in each side. Landlord has agreed to fund half cost of fitting. Number completely invented. £100 £100
Maintenance and Improvement Subtotal: £subtotal Recent total: £937.70
Carpet Furnishing Maintenance and Improvement Later Carpet tiles for the main room See breakdown in section below. £11.76pm2 * 54 £635.04 Wishlist#Carpet
Maintenance and Improvement Later Subtotal: £subtotal
Laser Materials Consumables Essential Materials Laser food Everything that the Laser eats. Notably no plywood currently. £128.60 £128.60 See breakdown below Wishlist#Materials_.2F_Consumables.
Component kits Consumables Essential Materials Components Misc assorted components which we mostly lack, at least that we can find. £19.62 £19.62 See breakdown below Wishlist#Materials_.2F_Consumables.
Essential Materials Subtotal: £subtotal
Total £tree.fiddy


In progress...

Materials / Consumables.

Assuming we have spare change in the grant, what house stock do we want to soak it up with? This is also useful as a bargaining tool so we can 'haggle down' if needed, by removing things that we didn't really need in the first place. It should all be justifiable, but some rationale relate more strongly to some aspects of 'revitalisation' than others.

- Filament; any in particular? Assuming 4 reels of https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp or similar colours until someone weighs in. 1.75 and 2.85 are the same price (£20.95). Also free sample filaments per reel. 
- Shrapnel kits (Total £59.96);


- Component kits (Total: £19.62); (Resistors and LEDs we're bloody swimming in.)
  https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 !
  https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99
- Laser ply, mdf, acrylic and friends. Laser ply still needs adding here (Total: £128.60)
  https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80 
  https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00
  https://www.kitronik.co.uk/3226-3mm-laser-compatible-medite-mdf-600mm-x-300mm-sheet.html x20 £18.00
  https://www.kitronik.co.uk/4720-clear-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90
  https://www.kitronik.co.uk/4705-black-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90
- Wood dyes, paints? Steve said some were missing - if I know which we can replace them? Spray paint is always useful eventually. A good ebony dye would be very nice.
- Lumber; any specifics? Plywood, CLS, pine planks ?
- Kitchen etc
  - cleaning materials
  - teabags / coffee
  - blueroll
- Catering expenses for volunteer workers is allowable in some grants. Point to consider for working party days.

To research / add:

For the lottery grant (see also Grants#Priorities):

Passive air filtration. Bloody useful and it could be considered under a few grant budget headings as accountancy requires. http://www.axminster.co.uk/jet-afs-500-air-filtration-system-310483 £304.25 - or one twice as effective for £90 more - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 £394.04 Other options are certainly available. Filters and mounting gubbins will also be needed for whichever is chosen.

The workshop is currently using Steve's toolkit for hand tool supply. Eventually we should replace this with our own - a decently equipped toolbox is about £150-200. See bottom of page for initial Lottery costings.

The same applies for the hand power tools. Pending discussion on loaning policy to avoid wasting a few grand.

It may be worth investing in a 3D printer that allows something otherwise new, eg a huge print bed, or multiple extruders. In particular, soluble filament would open new doors.


Lesser importance:


Small craft tools. To be costed.

Screen printing equipment. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably interest could research this I'd appreciate it, I'm oversaturated with research as it is.

A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.

Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.


Building infrastructure

For grants that are usable for construction materials. Need to measure roof area, carpet area, and rafter shelf length and height. Check for damp issues under there too...

Artist's impression of proposed shelving. Rumours of a magic carpet launch silo are entirely unsubstantiated.

The Under Rafter shelves

 Ply, assume  18x1220x2440mm 5 * £34.99 ; £174.93 (a lot of flat surface to cover here)
 CLS, 3 * £2.50 ; £7.50
 Casters, assume 8 bays * £4.29 pack 4 casters ; £34.32
 Screws, 500 * 1; £4.99

£221.74

CLS: 45cm * 7 * 2; 6.3m / 2.4m = 3 beams; £7.50. If we need support under, 2 * 5.6 = 11.2 / 2.4m = 5 beams; +£12.50

Plywood: 80cm * 120cm * 6 = 2 sheets, 5.6m * 80cm = +3 sheets. Technically can do 2 sheets but the joints would be everywhere.

It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though. Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.

Carpet

https://www.diy.com/departments/colours-cornflower-carpet-tile/81105_BQ.prd for no particular reason other than cost and vaguely similar colour.

The uncarpeted area is 5.6M by 8.8M. Tiles are .5M so rounding up to 6 by 9; halftiles will mean we have some left over but a few spares are not a bad thing.

In total, £11.76 per square meter for 54 square meters ... £635.04 Facebook Marketplace seems an erratic but good value source of cheap tiles.


Overheads

They are our main outlay. In theory we should use grants that allow such use for as much of them as we can, to free up member dues for sustainability purposes, but past a point the grant proposal won't look exciting enough to be approved. Each grant varies in what is allowable, and their attitude towards overhead costs.

Monthly costs:

Rent: £437
Insurance: £60

Utilities:

Internet: £66
Electricity and gas: £shedloads

Annual Costs:

Landlord Insurance: £275

Irregular costs:

Boiler Servicing: £unknown
Accountancy: £unknown

Things that would be very nice but we can probably build or bodge:

https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/ £47.98 , solid cross vice. Adam is currently brewing something out of scraps and dreams for the drill press but it won't be as sturdy!

https://www.screwfix.com/p/triton-tsps450-450w-oscillating-spindle-sander-240v/1417k £120 , Bobbin sander. Wonderful for anything non-flat, but we could in theory make our own.


The 'Magic Money Wand' Section

Lottery Grant

Costed

  • Main room electronics bays. Assuming the same as last time - £525.60.
  • Basic workshop toolkit - about £200 when including measuring gubbins, see below.
  • Overheads. As needed to fill numbers, up to half of the grant or so.
  • The workshop roof. Rough estimate but quotes are needed - this might not make it into the grant application but we should still have the information and option. £1,500-£2,500
  • Air filtration unit - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 £394.04

Non-critical but lovely:

To Cost

  • Lighting in the main room
  • Ventilation fan for the workshop - landlord has offered to half-fund this!

Which consumables? Same as last time?

Main Room Additions

  • Sharpies.
  • More drawing equipment - I've equipped us with basic geometry and stationery, but curve rulers would be excellent.
  • Cutting mats
  • Metal rulers with nonslip backing
  • Actual scalpels, and a more rugged general craft knife

Craft 'starter kits'

To expand options.

  • Leatherwork
  • Wirework
  • Papercraft
  • Painting/finishing. Brushes, pallets and solvents etc.

Workshop Equipment

Hand tools

Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available.

 Wilko Combination Square 305mm * 2 £12.00
 Wilko Centre Punch 2pieces £2.75
 Wilko Bradawl 140mm £1.50
 Wilko Nail Punch 2pieces £3.00
 Wilko Gimlet 8mm £2.25
 Stanley Plier Set 3 Piece £15.00
 Wilko Combination Spanner Set 6piece £8.00
 Wilko Locking Wrench Drop Forged 254mm £5.00
 Wilko Professional Hacksaw 12in £8.75
 Wilko Coping Saw Blades 5 Assorted £6.00
 Wilko Screw Puller 6 x 100mm £2.00
 Wilko Hand Saw Soft Grip Handle 550mm £7.00
 Wilko Junior Hacksaw 6in £3.50
 Wilko Tenon Saw Soft Grip Handle 250mm £5.00
 Wilko Double Drive Screwdriver Set 49 Piece £20.00
 Wilko Allen Key 14pieces £4.00
 Wilko Pin Hammer 4oz £5.25
 Wilko Ball Pein Hammer 8oz £7.00
 Wilko Claw Hammer Fibreglass 16oz £6.50
 Wilko Carpenters Pincers Drop Forged 6in £4.00
 Wilko Wood Chisel Set £6.00
 Wilko Straight Cut Aviation Snips 10in £5.50
 Tri mitre square £4.50
 Wilko Interior Mallet 16oz £4.50
 Wilko Sledge Hammer 3Lb £12.00
 Wilko Wooden Mallet 4in £4.25

Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a heap on the floor.

Current total £165.25.

I'd suggest that we keep Steve's toolbag around for now, along with mine, but that any tools used from either are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.

Other useful related things: