View source for October 6th Working Party

==Priority Tasks==

* Sort and clean the workshop.
* Sort out the corner by the door
* Clean the kitchen
* Clean the toilet
* Hoover the main room floor
* Sort out the electronic benches
* Take rubbish to the tip
* The Laser PSU needs properly attaching, and the new Air Assist Control System (TM) needs installing

==Other Tasks==

* Set up a network shared folder. Common software, learning resources, and other critical stuff (like games) could live there.
* Get the vinyl cutter working - some software has arrived, testing is needed.
* The PCs need some tinkering again; PC3/Centre (nearest grey cupboard) seems to only output VGA (or the monitor ignores DVI). It might be a BIOS setting issue; ignore the top graphics ports!
* PC2/Back (middle of the 3 PCs) seems to overscan; likely either graphics settings or monitor issue, but nothing obvious. DVI use may fix it.
* Attach air conditioner outlet into Mr Laserducky's enclosure.
* Patch up Woodzilla front pockets. They've split out from the frame at the base.
* Swap front door camera.
* Fix concerningly squeaky workshop hatch.
* We've had some donations of Misc Stuff In Boxes. Currently at the top right of Palletron, they need sorting and curating/defenestrating as required.
* Tile the kitchen wall above the sink
* Paint more of the ceiling - this is a condition of our lease.