View source for 3D printer - da Vinci

==da Vinci==

[[File:A3dprinter.jpg|200px|right]]

Allegedly working again. Settings and filament currently unknown, investigation welcomed.

This is a proprietary printer, to use at present I believe you need to use the software available from the [http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0 website].

===Specification===
''from the website'' [http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0 xyzprinting.com web site]

* Build area: 200mm x 200mm x 200mm
* Max travel speed: 120mm/s
* 1.75mm dia. filament
* 0.4mm diameter nozzle
* Max nozzle temperature: 240 deg. C
* Print bed temperature: 40 - 90 Deg. C
* Material compatibility: PLA / ABS / Flexible / Tough PLA
* Supported file formats: .stl, XYZ Format (.3w), 3mf, G-code

===Upgrade plans===

* Review to see if Opensource firmware can be installed, to enable a non proprietary tool chain to be used, i.e. slice using Cura or similar and control with OctoPrint.
* Produce a workflow to enable members to follow when using.

[[Category: Equipment]]