3D printer - da Vinci

From ipswichmakerspace
Revision as of 14:14, 16 June 2019 by Kellis (Talk | contribs) (Category added)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

da Vinci

A3dprinter.jpg

Allegedly working again. Settings and filament currently unknown, investigation welcomed.

This is a proprietary printer, to use at present I believe you need to use the software available from the website.

Specification

from the website xyzprinting.com web site

  • Build area: 200mm x 200mm x 200mm
  • Max travel speed: 120mm/s
  • 1.75mm dia. filament
  • 0.4mm diameter nozzle
  • Max nozzle temperature: 240 deg. C
  • Print bed temperature: 40 - 90 Deg. C
  • Material compatibility: PLA / ABS / Flexible / Tough PLA
  • Supported file formats: .stl, XYZ Format (.3w), 3mf, G-code

Upgrade plans

  • Review to see if Opensource firmware can be installed, to enable a non proprietary tool chain to be used, i.e. slice using Cura or similar and control with OctoPrint.
  • Produce a workflow to enable members to follow when using.
Retrieved from "https://home.ipswichmakerspace.com/mediawiki/index.php?title=3D_printer_-_da_Vinci&oldid=1351"