CNC

From ipswichmakerspace
Revision as of 20:14, 6 June 2017 by Leachj (Talk | contribs) (1 revision imported)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


The Makerspace has a Mostly Printed CNC (MPCNC) built from this design

Cnc.jpg

Hardware

The CNC is build from 3D printed parts, galvanised electrical conduit and 3D printer electronics. It has an LCD screen for low level control and an octoprint server for web control.

Different heads can be used on the CNC. Currently we have:

  • Router - 700w can take 1/4" and 6mm bits
  • Drag knife - for vinyl/paper cutting
  • Pen - for plotting

Software

The recommended software for the CNC is estlcam a tutorial and some initial settings can be found here

Retrieved from "https://home.ipswichmakerspace.com/mediawiki/index.php?title=CNC&oldid=9"