Difference between revisions of "2D printer"
From ipswichmakerspace
m |
m (Minor update) |
||
| Line 1: | Line 1: | ||
Turn the printer on at the back, the switch is located at the back on the left hand side. | Turn the printer on at the back, the switch is located at the back on the left hand side. | ||
| − | You will need to install the printer onto your machine, the printer shows up as a Bonjour printer, First Connect to the Makerspace network | + | You will need to install the printer onto your machine, the printer shows up as a Bonjour printer, First Connect to the Makerspace network. |
| − | Windows | + | ===Mac=== |
| + | Those with Macs, simply open the printers control panel and search, your should see the Dell printer listed and in most cases the default driver should work fine. | ||
| + | |||
| + | ===Linux=== | ||
| + | Similar to Mac, search in the printer control panel and it should show up allowing easy installation. | ||
| + | |||
| + | ===Windows=== | ||
| + | tbc, but you will need to install Bonjour for windows, this can be downloaded [https://support.apple.com/downloads/Bonjour_for_Windows here] | ||
| − | |||
[[Category: Equipment]] [[Category: Stub]] | [[Category: Equipment]] [[Category: Stub]] | ||
Revision as of 15:44, 8 February 2019
Turn the printer on at the back, the switch is located at the back on the left hand side.
You will need to install the printer onto your machine, the printer shows up as a Bonjour printer, First Connect to the Makerspace network.
Mac
Those with Macs, simply open the printers control panel and search, your should see the Dell printer listed and in most cases the default driver should work fine.
Linux
Similar to Mac, search in the printer control panel and it should show up allowing easy installation.
Windows
tbc, but you will need to install Bonjour for windows, this can be downloaded here
