Difference between revisions of "Wishlist"
From ipswichmakerspace
m (→Lottery Grant) |
m |
||
| (17 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
''(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)'' | ''(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)'' | ||
| − | Originally this page was a simple listing of what we might want in a grant, but has grown into a comprehensively costed listing for application purposes. | + | Originally this page was a simple listing of what we might want in a grant, but has grown into a comprehensively costed listing for application purposes. Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment. |
The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to! | The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to! | ||
| − | '''NOTE:''' If you wish to add to the Wishlist proper, please head to the '''[[Wishlist#Lottery_Grant|end of the page]]''' - much of the current content | + | '''NOTE:''' If you wish to add to the Wishlist proper, please head to the '''[[Wishlist#Lottery_Grant|end of the page]]''' - much of the current content is frozen as a grant application is now in progress. In particular this is where the [[#Hand_tools|hand tools]] list is brewing, to replace Steve's toolbag with our own set. |
| − | + | '''Council Grant wishlist/totals page''' is [[https://home.ipswichmakerspace.com/mediawiki/index.php?title=Wishlist&oldid=618 here]] if still needed for reference. The Wishlist is currently brewing the Lottery application, under the ''assumption'' that the Council Grant succeeded fully. Note that it is now slightly outdated as the lathe is no longer required, freeing ~£164.39 for other purposes (hopefully craft related ones, especially textiles, specifically dressmaking and other costumery). | |
| − | + | ||
| − | + | ||
David has promised a resin kitlist, this will go into Essential Materials when available. It's not a blocking number as we should hopefully have flexibility regarding what materials we buy. He's also suggested a casting workshop at some point this year. | David has promised a resin kitlist, this will go into Essential Materials when available. It's not a blocking number as we should hopefully have flexibility regarding what materials we buy. He's also suggested a casting workshop at some point this year. | ||
| Line 16: | Line 14: | ||
Options: | Options: | ||
| − | Woodworking T&E ( | + | Woodworking T&E (Replacement hand tools, air filtration, bandsaw, radial arm drill, minimill for stretch) |
| − | Main Room T&E (Rapid | + | Main Room T&E (Rapid kitlist is one bay's worth. Assuming one bay included in this grant ''for now'', for eventually three top notch bays in total) |
| − | Maintenance and Improvement ( | + | Maintenance and Improvement ('''Lighting needed''') |
| − | Essential Materials ( | + | Essential Materials (Same as last time - wood, filament, resin, screws, solder, etc. '''Requesting input from all concerned parties about woodstock, paints and finishes.''') |
| − | Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter. Please | + | Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter. |
| + | |||
| + | '''Please do not change table structure'''. Javascript automatically updates '£subtotal' fields based on cell position/indexes. | ||
| − | |||
Heading +' Later' eg 'Woodworking T&E Later' is valid; it lets me keep things in the list that are for a later time/grant/too much for this one's budget/etc. | Heading +' Later' eg 'Woodworking T&E Later' is valid; it lets me keep things in the list that are for a later time/grant/too much for this one's budget/etc. | ||
| Line 38: | Line 37: | ||
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Hand tools |
| − | | | + | | Tools |
| − | | | + | | Workshop T&E |
| − | | | + | | Replacement hand tools |
| − | | | + | | Close estimate for mostly costed hand tool list + a few measurement tools. |
| − | | | + | | £200.00 |
| − | | | + | | £200.00 |
| − | | | + | | [[#Hand_tools|hand tools]] |
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Angle Grinder Stand |
| − | | | + | | Tool |
| − | | | + | | Workshop T&E |
| − | + | | Angle grinder + chop saw | |
| − | + | | For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs. | |
| − | + | | £21.23 | |
| − | + | | £21.23 | |
| − | + | | https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785 | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | | For | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | | | + | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | | | + | |
| − | | https://www.ebay.co.uk/itm/ | + | |
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Radial Drill |
| Tool | | Tool | ||
| − | | | + | | Workshop T&E |
| − | | | + | | Extendable powerful drill |
| − | | | + | | Deeper throat and greater depth. Also means the current drill can be dedicated and set up for a given purpose eg lowspeed metalwork. |
| − | | | + | | £326.00 |
| − | | | + | | £326.00 |
| − | | | + | | https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928 |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Riveter |
| Tool | | Tool | ||
| − | | | + | | Workshop T&E |
| − | | | + | | Hand-held riveter |
| − | | | + | | Also comes with variously sized rivets. |
| − | | | + | | £19.84 |
| − | | | + | | £19.84 |
| − | | https://www. | + | | https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786 |
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Workshop T&E |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| | | | ||
| | | | ||
| Line 224: | Line 89: | ||
| '''Subtotal:''' | | '''Subtotal:''' | ||
| '''£subtotal''' | | '''£subtotal''' | ||
| − | | | + | | |
|- | |- | ||
| + | |||
| + | ! scope="row"| Minimill | ||
| + | | Tool | ||
| + | | Workshop T&E Stretch | ||
| + | | A milling machine | ||
| + | | Very versatile. Might be irrelevant if Ben lends his metal CNC? | ||
| + | | £902.51 | ||
| + | | £902.51 | ||
| + | | https://www.axminster.co.uk/axminster-model-engineer-series-sx2-mini-mill-505099 | ||
| + | |- | ||
| − | ! scope="row"| Cross Vise | + | ! scope="row"| Cross Vise ''(hopefully council granted)'' |
| Utility | | Utility | ||
| − | | | + | | Workshop T&E Stretch |
| A cross vice for the drill press. | | A cross vice for the drill press. | ||
| − | | | + | | Irreplaceable for precision tasks. |
| £47.98 | | £47.98 | ||
| £47.98 | | £47.98 | ||
| Line 240: | Line 115: | ||
| − | ! scope="row"| | + | ! scope="row"| Workshop T&E Stretch |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| | | | ||
| | | | ||
| Line 258: | Line 122: | ||
| '''Subtotal:''' | | '''Subtotal:''' | ||
| '''£subtotal''' | | '''£subtotal''' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
| Line 510: | Line 295: | ||
| '''Subtotal:''' | | '''Subtotal:''' | ||
| '''£subtotal''' | | '''£subtotal''' | ||
| − | | | + | | |
|- | |- | ||
| Line 535: | Line 320: | ||
| '''Subtotal:''' | | '''Subtotal:''' | ||
| '''£subtotal''' | | '''£subtotal''' | ||
| − | | | + | | |
|- | |- | ||
| Line 541: | Line 326: | ||
| + | ! scope="row"| Air filtration unit | ||
| + | | Fitting | ||
| + | | Maintenance and Improvement | ||
| + | | Air / dust filtration for the workshop | ||
| + | | This can happily sit on the winch girder | ||
| + | | £394.04 | ||
| + | | £394.04 | ||
| + | | http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 | ||
| + | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Lighting - cable trays |
| Fixture | | Fixture | ||
| Maintenance and Improvement | | Maintenance and Improvement | ||
| − | | | + | | Main Room lighting |
| − | | | + | | 5.45 per 3m tray; 11.5m*3 coverage needed. |
| − | | | + | | £5.45 |
| − | | | + | | £65.40 |
| − | | | + | | https://uk.rs-online.com/web/p/cable-trays-baskets/7989414/ |
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Lighting - wiring |
| Fixture | | Fixture | ||
| Maintenance and Improvement | | Maintenance and Improvement | ||
| − | | | + | | Main Room lighting |
| − | | | + | | Reel of wire - ''price currently invented'' |
| − | | | + | | £50 |
| − | | | + | | £50 |
| − | | | + | | |
|- | |- | ||
| + | ! scope="row"| Lighting - light fixtures | ||
| + | | Fixture | ||
| + | | Maintenance and Improvement | ||
| + | | Main Room lighting | ||
| + | | Actual lights - are bulbs included? - ''price currently invented'' | ||
| + | | £150 | ||
| + | | £150 | ||
| + | | | ||
| + | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Workshop Ventilation |
| Fitting | | Fitting | ||
| Maintenance and Improvement | | Maintenance and Improvement | ||
| − | | | + | | Air in/extraction for the workshop |
| − | + | | Extraction fans would probably have to be fitted through the window in each side. Landlord has agreed to fund half cost of fitting. ''Number completely invented.'' | |
| − | | | + | | £100 |
| − | | | + | | £100 |
| − | | | + | | |
|- | |- | ||
| + | |||
| + | |||
| Line 603: | Line 408: | ||
| '''Subtotal:''' | | '''Subtotal:''' | ||
| '''£subtotal''' | | '''£subtotal''' | ||
| − | | | + | | |
|- | |- | ||
| − | ! scope="row"| | + | ! scope="row"| Laser Materials |
| Consumables | | Consumables | ||
| − | | Essential Materials | + | | Essential Materials |
| − | | | + | | Laser food |
| − | | | + | | Everything that the Laser eats. ''Notably no plywood currently.'' |
| − | | | + | | £128.60 |
| − | | | + | | £128.60 |
| See breakdown below [[Wishlist#Materials_.2F_Consumables.]] | | See breakdown below [[Wishlist#Materials_.2F_Consumables.]] | ||
|- | |- | ||
| + | |||
! scope="row"| Component kits | ! scope="row"| Component kits | ||
| Consumables | | Consumables | ||
| − | | Essential Materials | + | | Essential Materials |
| Components | | Components | ||
| Misc assorted components which we mostly lack, at least that we can find. | | Misc assorted components which we mostly lack, at least that we can find. | ||
| Line 627: | Line 433: | ||
|- | |- | ||
| − | ! scope="row"| Essential Materials | + | |
| + | ! scope="row"| Essential Materials | ||
| | | | ||
| | | | ||
| Line 634: | Line 441: | ||
| '''Subtotal:''' | | '''Subtotal:''' | ||
| '''£subtotal''' | | '''£subtotal''' | ||
| − | | | + | | |
|- | |- | ||
| Line 656: | Line 463: | ||
- Shrapnel kits ('''Total £59.96'''); | - Shrapnel kits ('''Total £59.96'''); | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
- Component kits ('''Total: £19.62'''); (Resistors and LEDs we're bloody swimming in.) | - Component kits ('''Total: £19.62'''); (Resistors and LEDs we're bloody swimming in.) | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 ! | https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 ! | ||
https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99 | https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99 | ||
| − | - Laser ply, mdf, acrylic and friends. Laser ply still needs adding here | + | - Laser ply, mdf, acrylic and friends. Laser ply still needs adding here ('''Total: £128.60''') |
https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80 | https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80 | ||
https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00 | https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00 | ||
| Line 701: | Line 500: | ||
It may be worth investing in a 3D printer that allows something otherwise new, eg a huge print bed, or multiple extruders. In particular, soluble filament would open new doors. | It may be worth investing in a 3D printer that allows something otherwise new, eg a huge print bed, or multiple extruders. In particular, soluble filament would open new doors. | ||
| − | + | ||
Lesser importance: | Lesser importance: | ||
| − | |||
| − | |||
| − | + | Small craft tools. To be costed. | |
| − | + | Screen printing equipment. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably interest could research this I'd appreciate it, I'm oversaturated with research as it is. | |
A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though. | A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though. | ||
| Line 717: | Line 514: | ||
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes. | Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes. | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Building infrastructure== | ==Building infrastructure== | ||
| Line 730: | Line 519: | ||
For grants that are usable for construction materials. Need to measure roof area, carpet area, and rafter shelf length and height. Check for damp issues under there too... | For grants that are usable for construction materials. Need to measure roof area, carpet area, and rafter shelf length and height. Check for damp issues under there too... | ||
| − | + | [[File:Workshop_shelves.png|400px|thumb|right|Artist's impression of proposed shelving. Rumours of a magic carpet launch silo are entirely unsubstantiated.]] | |
| − | + | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===The Under Rafter shelves=== | ===The Under Rafter shelves=== | ||
| Line 762: | Line 542: | ||
The uncarpeted area is 5.6M by 8.8M. Tiles are .5M so rounding up to 6 by 9; halftiles will mean we have some left over but a few spares are not a bad thing. | The uncarpeted area is 5.6M by 8.8M. Tiles are .5M so rounding up to 6 by 9; halftiles will mean we have some left over but a few spares are not a bad thing. | ||
| − | In total, £11.76 per square meter for 54 square meters ... '''£635.04''' | + | In total, £11.76 per square meter for 54 square meters ... '''£635.04''' Facebook Marketplace seems an erratic but good value source of cheap tiles. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Overheads== | ==Overheads== | ||
| Line 800: | Line 574: | ||
== The 'Magic Money Wand' Section== | == The 'Magic Money Wand' Section== | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Lottery Grant == | == Lottery Grant == | ||
| Line 813: | Line 580: | ||
*Main room electronics bays. ''Assuming'' the same as last time - '''£525.60'''. | *Main room electronics bays. ''Assuming'' the same as last time - '''£525.60'''. | ||
| − | *Basic workshop toolkit - about '''£200''', see below. | + | *Basic workshop toolkit - about '''£200''' when including measuring gubbins, see below. |
*Overheads. As needed to fill numbers, up to half of the grant or so. | *Overheads. As needed to fill numbers, up to half of the grant or so. | ||
*The workshop roof. Rough estimate but quotes are needed - this might not make it into the grant application but we should still have the information and option. '''£1,500-£2,500''' | *The workshop roof. Rough estimate but quotes are needed - this might not make it into the grant application but we should still have the information and option. '''£1,500-£2,500''' | ||
*Air filtration unit - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 '''£394.04''' | *Air filtration unit - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 '''£394.04''' | ||
| − | |||
Non-critical but lovely: | Non-critical but lovely: | ||
| Line 827: | Line 593: | ||
*Lighting in the main room | *Lighting in the main room | ||
*Ventilation fan for the workshop - landlord has offered to half-fund this! | *Ventilation fan for the workshop - landlord has offered to half-fund this! | ||
| − | |||
| + | ''Which consumables? Same as last time?'' | ||
===Main Room Additions=== | ===Main Room Additions=== | ||
| Line 844: | Line 610: | ||
*Wirework | *Wirework | ||
*Papercraft | *Papercraft | ||
| + | *Painting/finishing. Brushes, pallets and solvents etc. | ||
===Workshop Equipment=== | ===Workshop Equipment=== | ||
| − | |||
| − | |||
| − | |||
====Hand tools==== | ====Hand tools==== | ||
| Line 855: | Line 619: | ||
Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available. | Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available. | ||
| − | [http://www.wilko.com/all-hand-tools/wilko-combination-square-305mm/invt/0209181 Wilko Combination Square 305mm] | + | [http://www.wilko.com/all-hand-tools/wilko-combination-square-305mm/invt/0209181 Wilko Combination Square 305mm] * 2 £12.00 |
[http://www.wilko.com/all-hand-tools/wilko-centre-punch-2pieces/invt/0343918 Wilko Centre Punch 2pieces] £2.75 | [http://www.wilko.com/all-hand-tools/wilko-centre-punch-2pieces/invt/0343918 Wilko Centre Punch 2pieces] £2.75 | ||
[http://www.wilko.com/all-hand-tools/wilko-bradawl-140mm/invt/0209298 Wilko Bradawl 140mm] £1.50 | [http://www.wilko.com/all-hand-tools/wilko-bradawl-140mm/invt/0209298 Wilko Bradawl 140mm] £1.50 | ||
| Line 877: | Line 641: | ||
[http://www.wilko.com/all-hand-tools/wilko-wood-chisel-set/invt/0343911 Wilko Wood Chisel Set] £6.00 | [http://www.wilko.com/all-hand-tools/wilko-wood-chisel-set/invt/0343911 Wilko Wood Chisel Set] £6.00 | ||
[http://www.wilko.com/all-hand-tools/wilko-straight-cut-aviation-snips-10in/invt/0209105 Wilko Straight Cut Aviation Snips 10in] £5.50 | [http://www.wilko.com/all-hand-tools/wilko-straight-cut-aviation-snips-10in/invt/0209105 Wilko Straight Cut Aviation Snips 10in] £5.50 | ||
| + | [http://www.wilko.com/all-hand-tools/wilko-tri-and-mitre-square-100-and-200mm/invt/0209549 Tri mitre square] £4.50 | ||
[http://www.wilko.com/all-hand-tools/wilko-interior-mallet-16oz/invt/0343403 Wilko Interior Mallet 16oz] £4.50 | [http://www.wilko.com/all-hand-tools/wilko-interior-mallet-16oz/invt/0343403 Wilko Interior Mallet 16oz] £4.50 | ||
[http://www.wilko.com/all-hand-tools/wilko-sledge-hammer-3lb/invt/0343401 Wilko Sledge Hammer 3Lb] £12.00 | [http://www.wilko.com/all-hand-tools/wilko-sledge-hammer-3lb/invt/0343401 Wilko Sledge Hammer 3Lb] £12.00 | ||
| Line 883: | Line 648: | ||
Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a heap on the floor. | Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a heap on the floor. | ||
| − | Current total ''' | + | Current total '''£165.25'''. |
| − | I'd suggest that we keep Steve's toolbag around for now, but that any tools used from | + | I'd suggest that we keep Steve's toolbag around for now, along with mine, but that any tools used from either are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours. |
Other useful related things: | Other useful related things: | ||
| − | |||
| − | * | + | * http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398 '''£9.99''' |
| − | + | * Metric speed square https://www.ebay.co.uk/itm/7-Metric-Aluminum-Alloy-Speed-Square-Roofing-Triangle-Angle-Protractor-Ruler/132389623025?epid=916183692&hash=item1ed30954f1:g:Wt4AAOSw9hdaALFK '''£4.31''' | |
| − | * | + | * Dedicated workshop digital calipers ; https://www.ebay.co.uk/itm/Digital-Vernier-Caliper-Stainless-Steel-Gauge-LCD-Measuring-Tool-Caliper-Gauge/152611671649 '''£9.80''' (or £1 cheaper from China) |
| − | *Dedicated workshop digital calipers ; | + | |
[[Category: Finance]] [[Category: Equipment]] | [[Category: Finance]] [[Category: Equipment]] | ||
Latest revision as of 19:43, 4 November 2018
(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)
Originally this page was a simple listing of what we might want in a grant, but has grown into a comprehensively costed listing for application purposes. Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.
The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!
NOTE: If you wish to add to the Wishlist proper, please head to the end of the page - much of the current content is frozen as a grant application is now in progress. In particular this is where the hand tools list is brewing, to replace Steve's toolbag with our own set.
Council Grant wishlist/totals page is [here] if still needed for reference. The Wishlist is currently brewing the Lottery application, under the assumption that the Council Grant succeeded fully. Note that it is now slightly outdated as the lathe is no longer required, freeing ~£164.39 for other purposes (hopefully craft related ones, especially textiles, specifically dressmaking and other costumery).
David has promised a resin kitlist, this will go into Essential Materials when available. It's not a blocking number as we should hopefully have flexibility regarding what materials we buy. He's also suggested a casting workshop at some point this year.
Budget category is for grant purposes, and automatic totalling. By the same token Cost is cleaned line cost eg 3 * goggles at '£3-5ish' == 3*4 == £12. For specifically costed items that only one are needed of, this is a duplicate of Price.
Options:
Woodworking T&E (Replacement hand tools, air filtration, bandsaw, radial arm drill, minimill for stretch) Main Room T&E (Rapid kitlist is one bay's worth. Assuming one bay included in this grant for now, for eventually three top notch bays in total) Maintenance and Improvement (Lighting needed) Essential Materials (Same as last time - wood, filament, resin, screws, solder, etc. Requesting input from all concerned parties about woodstock, paints and finishes.)
Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter.
Please do not change table structure. Javascript automatically updates '£subtotal' fields based on cell position/indexes.
Heading +' Later' eg 'Woodworking T&E Later' is valid; it lets me keep things in the list that are for a later time/grant/too much for this one's budget/etc.
| Item | Type | Budget Category | Description | Rationale / Notes | Price | Cost | URL |
|---|---|---|---|---|---|---|---|
| Hand tools | Tools | Workshop T&E | Replacement hand tools | Close estimate for mostly costed hand tool list + a few measurement tools. | £200.00 | £200.00 | hand tools |
| Angle Grinder Stand | Tool | Workshop T&E | Angle grinder + chop saw | For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs. | £21.23 | £21.23 | https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785 |
| Radial Drill | Tool | Workshop T&E | Extendable powerful drill | Deeper throat and greater depth. Also means the current drill can be dedicated and set up for a given purpose eg lowspeed metalwork. | £326.00 | £326.00 | https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928 |
| Riveter | Tool | Workshop T&E | Hand-held riveter | Also comes with variously sized rivets. | £19.84 | £19.84 | https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786 |
| Workshop T&E | Subtotal: | £subtotal | |||||
| Minimill | Tool | Workshop T&E Stretch | A milling machine | Very versatile. Might be irrelevant if Ben lends his metal CNC? | £902.51 | £902.51 | https://www.axminster.co.uk/axminster-model-engineer-series-sx2-mini-mill-505099 |
| Cross Vise (hopefully council granted) | Utility | Workshop T&E Stretch | A cross vice for the drill press. | Irreplaceable for precision tasks. | £47.98 | £47.98 | https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/ |
| Workshop T&E Stretch | Subtotal: | £subtotal | |||||
| Soldering Station | Tool | Main Room T&E | Steve’s Kitlist | Atten ST-60 Premium Intelligent Soldering Station 60W | £82.15 | £82.15 | https://www.rapidonline.com/85-6924 |
| Soldering Tip | Tool | Main Room T&E | Steve’s Kitlist | Atten 900M-T-0.8 900M Series Soldering Tip Chisel 0.8mm | £2.99 | £2.99 | https://www.rapidonline.com/85-6942 |
| Soldering Tip | Tool | Main Room T&E | Steve’s Kitlist | Atten 900M-T-2.4 900M Series Soldering Tip Chisel 2.4mm | £2.99 | £2.99 | https://www.rapidonline.com/85-6938 |
| Soldering Tip | Tool | Main Room T&E | Steve’s Kitlist | Atten 900M-T-2C 900M Series Soldering Tip Sloped 2mm | £2.99 | £2.99 | https://www.rapidonline.com/85-6944 |
| Tip Cleaner | Tool | Main Room T&E | Steve’s Kitlist | Xytronic 460 Brass Wool Solder Tip Cleaner | £4.77 | £4.77 | https://www.rapidonline.com/85-0626 |
| Tip Cleaner Refill | Consumable | Main Room T&E | Steve’s Kitlist | Xytronic 459 Brass Wool Solder Tip Cleaner Refill | £1.67 | £1.67 | https://www.rapidonline.com/85-0628 |
| Solder | Consumable | Main Room T&E | Steve’s Kitlist | Rapid Solder Wire 60/40 22SWG 0.7mm 100g Reel | £4.67 | £4.67 | https://www.rapidonline.com/85-0592 |
| Solder | Consumable | Main Room T&E | Steve’s Kitlist | Rapid Lead-Free Solder Wire 22SWG 0.7mm 100g Reel | £5.09 | £5.09 | https://www.rapidonline.com/85-1166 |
| Pliers | Tool | Main Room T&E | Steve’s Kitlist | CK Tools T3889 Ecotronic ESD Long Snipe Nose Pliers | £9.99 | £9.99 | https://www.rapidonline.com/93-3421 |
| Cutters | Tool | Main Room T&E | Steve’s Kitlist | CK Tools T3887 Ecotronic ESD Side Cutters | £10.40 | £10.40 | https://www.rapidonline.com/93-3419 |
| Lamp | Tool | Main Room T&E | Steve’s Kitlist | Xytronic JF-33CB Superior Illuminated Lamp | £69.33 | £69.33 | https://www.rapidonline.com/86-3333 |
| Power Supply | Tool | Main Room T&E | Steve’s Kitlist | Uni-T UTP3705S 0-32V 5A DC Power Supply 2 Channel | £178.94 | £178.94 | https://www.rapidonline.com/85-4048 |
| Multimeter | Tool | Main Room T&E | Steve’s Kitlist | Uni-T Intelligent Digital Multimeters UT71B | £118.73 | £118.73 | https://www.rapidonline.com/85-4065 |
| Screwdriver Set | Tool | Main Room T&E | Steve’s Kitlist | Wera 05030170001 1578A/6 6-Piece ESD Kraftform Micro Screwdriver Set | £20.06 | £20.06 | https://www.rapidonline.com/54-7139 |
| Ruler | Tool | Main Room T&E | Steve’s Kitlist | CK Tools T3530 12 Steel Rule 300mm/12" | £6.23 | £6.23 | https://www.rapidonline.com/86-1480 |
| Stabby Thing | Tool | Main Room T&E | Steve’s Kitlist | Stanley 0-10-150 SM9 Snap Off Blade Knife 9mm | £1.82 | £1.82 | https://www.rapidonline.com/86-0054 |
| Refill for Stabby Thing | Consumable | Main Room T&E | Steve’s Kitlist | Stanley 0-11-300 Snap Off Replacement Blades 9mm - Pack Of 10 | £2.78 | £2.78 | https://www.rapidonline.com/86-0055 |
| Main Room T&E | Subtotal: | £subtotal | |||||
| Filament | Consumable | Main Room T&E Stretch | Printer Filament | 4 Rolls of filament | £20.95 | £83.80 | https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp |
| Main Room T&E Stretch | Subtotal: | £subtotal | |||||
| Air filtration unit | Fitting | Maintenance and Improvement | Air / dust filtration for the workshop | This can happily sit on the winch girder | £394.04 | £394.04 | http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 |
| Lighting - cable trays | Fixture | Maintenance and Improvement | Main Room lighting | 5.45 per 3m tray; 11.5m*3 coverage needed. | £5.45 | £65.40 | https://uk.rs-online.com/web/p/cable-trays-baskets/7989414/ |
| Lighting - wiring | Fixture | Maintenance and Improvement | Main Room lighting | Reel of wire - price currently invented | £50 | £50 | |
| Lighting - light fixtures | Fixture | Maintenance and Improvement | Main Room lighting | Actual lights - are bulbs included? - price currently invented | £150 | £150 | |
| Workshop Ventilation | Fitting | Maintenance and Improvement | Air in/extraction for the workshop | Extraction fans would probably have to be fitted through the window in each side. Landlord has agreed to fund half cost of fitting. Number completely invented. | £100 | £100 | |
| Maintenance and Improvement | Subtotal: | £subtotal | Recent total: £937.70 | ||||
| Carpet | Furnishing | Maintenance and Improvement Later | Carpet tiles for the main room | See breakdown in section below. | £11.76pm2 * 54 | £635.04 | Wishlist#Carpet |
| Maintenance and Improvement Later | Subtotal: | £subtotal | |||||
| Laser Materials | Consumables | Essential Materials | Laser food | Everything that the Laser eats. Notably no plywood currently. | £128.60 | £128.60 | See breakdown below Wishlist#Materials_.2F_Consumables. |
| Component kits | Consumables | Essential Materials | Components | Misc assorted components which we mostly lack, at least that we can find. | £19.62 | £19.62 | See breakdown below Wishlist#Materials_.2F_Consumables. |
| Essential Materials | Subtotal: | £subtotal | |||||
| Total | £tree.fiddy | ||||||
Contents
In progress...
Materials / Consumables.
Assuming we have spare change in the grant, what house stock do we want to soak it up with? This is also useful as a bargaining tool so we can 'haggle down' if needed, by removing things that we didn't really need in the first place. It should all be justifiable, but some rationale relate more strongly to some aspects of 'revitalisation' than others.
- Filament; any in particular? Assuming 4 reels of https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp or similar colours until someone weighs in. 1.75 and 2.85 are the same price (£20.95). Also free sample filaments per reel.
- Shrapnel kits (Total £59.96);
- Component kits (Total: £19.62); (Resistors and LEDs we're bloody swimming in.)
https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 ! https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99
- Laser ply, mdf, acrylic and friends. Laser ply still needs adding here (Total: £128.60) https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80 https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00 https://www.kitronik.co.uk/3226-3mm-laser-compatible-medite-mdf-600mm-x-300mm-sheet.html x20 £18.00 https://www.kitronik.co.uk/4720-clear-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90 https://www.kitronik.co.uk/4705-black-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90
- Wood dyes, paints? Steve said some were missing - if I know which we can replace them? Spray paint is always useful eventually. A good ebony dye would be very nice.
- Lumber; any specifics? Plywood, CLS, pine planks ?
- Kitchen etc - cleaning materials - teabags / coffee - blueroll
- Catering expenses for volunteer workers is allowable in some grants. Point to consider for working party days.
To research / add:
For the lottery grant (see also Grants#Priorities):
Passive air filtration. Bloody useful and it could be considered under a few grant budget headings as accountancy requires. http://www.axminster.co.uk/jet-afs-500-air-filtration-system-310483 £304.25 - or one twice as effective for £90 more - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 £394.04 Other options are certainly available. Filters and mounting gubbins will also be needed for whichever is chosen.
The workshop is currently using Steve's toolkit for hand tool supply. Eventually we should replace this with our own - a decently equipped toolbox is about £150-200. See bottom of page for initial Lottery costings.
The same applies for the hand power tools. Pending discussion on loaning policy to avoid wasting a few grand.
It may be worth investing in a 3D printer that allows something otherwise new, eg a huge print bed, or multiple extruders. In particular, soluble filament would open new doors.
Lesser importance:
Small craft tools. To be costed.
Screen printing equipment. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably interest could research this I'd appreciate it, I'm oversaturated with research as it is.
A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.
Building infrastructure
For grants that are usable for construction materials. Need to measure roof area, carpet area, and rafter shelf length and height. Check for damp issues under there too...
The Under Rafter shelves
Ply, assume 18x1220x2440mm 5 * £34.99 ; £174.93 (a lot of flat surface to cover here) CLS, 3 * £2.50 ; £7.50 Casters, assume 8 bays * £4.29 pack 4 casters ; £34.32 Screws, 500 * 1; £4.99
£221.74
CLS: 45cm * 7 * 2; 6.3m / 2.4m = 3 beams; £7.50. If we need support under, 2 * 5.6 = 11.2 / 2.4m = 5 beams; +£12.50
Plywood: 80cm * 120cm * 6 = 2 sheets, 5.6m * 80cm = +3 sheets. Technically can do 2 sheets but the joints would be everywhere.
It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though. Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.
Carpet
https://www.diy.com/departments/colours-cornflower-carpet-tile/81105_BQ.prd for no particular reason other than cost and vaguely similar colour.
The uncarpeted area is 5.6M by 8.8M. Tiles are .5M so rounding up to 6 by 9; halftiles will mean we have some left over but a few spares are not a bad thing.
In total, £11.76 per square meter for 54 square meters ... £635.04 Facebook Marketplace seems an erratic but good value source of cheap tiles.
Overheads
They are our main outlay. In theory we should use grants that allow such use for as much of them as we can, to free up member dues for sustainability purposes, but past a point the grant proposal won't look exciting enough to be approved. Each grant varies in what is allowable, and their attitude towards overhead costs.
Monthly costs:
Rent: £437 Insurance: £60
Utilities:
Internet: £66 Electricity and gas: £shedloads
Annual Costs:
Landlord Insurance: £275
Irregular costs:
Boiler Servicing: £unknown Accountancy: £unknown
Things that would be very nice but we can probably build or bodge:
https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/ £47.98 , solid cross vice. Adam is currently brewing something out of scraps and dreams for the drill press but it won't be as sturdy!
https://www.screwfix.com/p/triton-tsps450-450w-oscillating-spindle-sander-240v/1417k £120 , Bobbin sander. Wonderful for anything non-flat, but we could in theory make our own.
The 'Magic Money Wand' Section
Lottery Grant
Costed
- Main room electronics bays. Assuming the same as last time - £525.60.
- Basic workshop toolkit - about £200 when including measuring gubbins, see below.
- Overheads. As needed to fill numbers, up to half of the grant or so.
- The workshop roof. Rough estimate but quotes are needed - this might not make it into the grant application but we should still have the information and option. £1,500-£2,500
- Air filtration unit - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 £394.04
Non-critical but lovely:
To Cost
- Lighting in the main room
- Ventilation fan for the workshop - landlord has offered to half-fund this!
Which consumables? Same as last time?
Main Room Additions
- Sharpies.
- More drawing equipment - I've equipped us with basic geometry and stationery, but curve rulers would be excellent.
- Cutting mats
- Metal rulers with nonslip backing
- Actual scalpels, and a more rugged general craft knife
Craft 'starter kits'
To expand options.
- Leatherwork
- Wirework
- Papercraft
- Painting/finishing. Brushes, pallets and solvents etc.
Workshop Equipment
Hand tools
Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available.
Wilko Combination Square 305mm * 2 £12.00 Wilko Centre Punch 2pieces £2.75 Wilko Bradawl 140mm £1.50 Wilko Nail Punch 2pieces £3.00 Wilko Gimlet 8mm £2.25 Stanley Plier Set 3 Piece £15.00 Wilko Combination Spanner Set 6piece £8.00 Wilko Locking Wrench Drop Forged 254mm £5.00 Wilko Professional Hacksaw 12in £8.75 Wilko Coping Saw Blades 5 Assorted £6.00 Wilko Screw Puller 6 x 100mm £2.00 Wilko Hand Saw Soft Grip Handle 550mm £7.00 Wilko Junior Hacksaw 6in £3.50 Wilko Tenon Saw Soft Grip Handle 250mm £5.00 Wilko Double Drive Screwdriver Set 49 Piece £20.00 Wilko Allen Key 14pieces £4.00 Wilko Pin Hammer 4oz £5.25 Wilko Ball Pein Hammer 8oz £7.00 Wilko Claw Hammer Fibreglass 16oz £6.50 Wilko Carpenters Pincers Drop Forged 6in £4.00 Wilko Wood Chisel Set £6.00 Wilko Straight Cut Aviation Snips 10in £5.50 Tri mitre square £4.50 Wilko Interior Mallet 16oz £4.50 Wilko Sledge Hammer 3Lb £12.00 Wilko Wooden Mallet 4in £4.25
Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a heap on the floor.
Current total £165.25.
I'd suggest that we keep Steve's toolbag around for now, along with mine, but that any tools used from either are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.
Other useful related things:
- http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398 £9.99
- Metric speed square https://www.ebay.co.uk/itm/7-Metric-Aluminum-Alloy-Speed-Square-Roofing-Triangle-Angle-Protractor-Ruler/132389623025?epid=916183692&hash=item1ed30954f1:g:Wt4AAOSw9hdaALFK £4.31
- Dedicated workshop digital calipers ; https://www.ebay.co.uk/itm/Digital-Vernier-Caliper-Stainless-Steel-Gauge-LCD-Measuring-Tool-Caliper-Gauge/152611671649 £9.80 (or £1 cheaper from China)
