Difference between revisions of "Current wishlist"
(→New Stuff) |
m (→New Stuff) |
||
Line 613: | Line 613: | ||
http://amzn.eu/d/dX2qx56 '''£2.50''' Arc Welding Rods | http://amzn.eu/d/dX2qx56 '''£2.50''' Arc Welding Rods | ||
− | + | ||
- Ideal Metalworking Total ('''$blocktotal'''); | - Ideal Metalworking Total ('''$blocktotal'''); | ||
https://www.r-techwelding.co.uk/tig-mma-welder-dc-pulse-200a-digital-110v-240v/ '''£549.00''' R-Tech TIG Welder DC Digital | https://www.r-techwelding.co.uk/tig-mma-welder-dc-pulse-200a-digital-110v-240v/ '''£549.00''' R-Tech TIG Welder DC Digital | ||
Line 620: | Line 620: | ||
https://www.r-techwelding.co.uk/1kg-4043a-grade-aluminium-1-6mm-tig-filler-rods/ '''£10.95''' Aluminium Tig Filler Rods | https://www.r-techwelding.co.uk/1kg-4043a-grade-aluminium-1-6mm-tig-filler-rods/ '''£10.95''' Aluminium Tig Filler Rods | ||
https://www.r-techwelding.co.uk/1kg-mild-steel-1-0mm-tig-filler-rod/ '''£14.90''' Steel TIG Filler Rods | https://www.r-techwelding.co.uk/1kg-mild-steel-1-0mm-tig-filler-rod/ '''£14.90''' Steel TIG Filler Rods | ||
+ | |||
+ | |||
+ | - Blacksmithing (awaiting information on possible donations/loanations/purchase opportunities) | ||
+ | |||
+ | Anvil, heavier the better - cheap Chinese have reputation of being made of cast iron, ie. non-heattreated and soft, don’t go that way. East-Europeans etc. are usually OK. The anvil needs a proper block under it, and ideally a horn. Railway track can be used to make smaller specific-purpose anvils. | ||
+ | Some anvil tools are needed, cutting wedge and iron plate for hot-cutting. | ||
+ | Hammers & tongs - more the merrier - and for once, here diversity is a good thing! Minimal core; 1kg, 1,5kg and a 2 kg straight peen blacksmiths hammers, a couple smaller ball peen hammers and some basic tongs should suffice for a start. Mole grips/clamps also handy. | ||
+ | Working tables, at least one with a metal surface. Need to think about weatherproofing. | ||
+ | The actual forge. Probably gas powered tube-forge for efficiency, no reason we couldn't make another size later if needed. | ||
+ | A few vices are a must. | ||
+ | Some literature about the craft would come handy too | ||
+ | A power hammer would be amazing, and save us pissing the neighbors off. | ||
+ | |||
+ | |||
+ | - Sharable with the metalshop: | ||
+ | Some sort of fixed grinder - stone or belt sander. | ||
+ | Fixed vertical drill. | ||
+ | Loads of hand tools, angle grinders of different sizes, files, metal brushes, pliers, hack-saws, etc. | ||
+ | Protection stuff, goggles, respirators, earmuffs, maybe panzers or coveralls too. | ||
+ | Table mounted sheet metal cutter? | ||
===Materials / Consumables.=== | ===Materials / Consumables.=== |
Revision as of 12:03, 24 November 2018
This page is a hybrid of the old Council Grant page, which was mainly core items for about £2k, and the current/Lottery Grant wishlist, which is more optimistic and includes infrastructure. Once Things have Settled, the Wishlist can then be reconfigured, taking any recent developments into account.
Contents
Notes:
Page Intent
(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)
Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment. The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!
Awaiting research & costing
Lathe tools. At the least, a roughing gouge of our own would be prudent. Some existing long-term loan tools need TLC. The table saw needs a new blade, Jon had to buy a new chop saw fence recently, and the belt sander needs a new belt. The bandsaw needs shooting. Interlinked smoke detectors. Jimbo had some suggestions there. More cameras are needed for downstairs CAT5 too New laser tube for Selene, ideally 40W or close A3 laminator A3 printer kiln Forge construction materials Anvil Anvil tools Plasma cutter! Water extinguishers, C02x2
https://www.kitronik.co.uk/materials/polypropylene/0-5mm-polypropylene-sheets.html
Workshop materials
As in materials for running workshops, to get people interested. Ideas have so far included laser box making, silver jewellery casting, and resin casting (David).
First priority is working out what workshops we wish to run. Second is if we want to bother explicitly costing them, or just fund them from the float & repay that from the day's fees. We do however need enough stock material and equipment on hand for the process.
Resin has been costed now. Laser boxes require absolutely nothing new - hopefully this can be a regular workshop if it goes well.
Silver casting; gas, a blowtorch, a crucible, and an old saucepan full of sand are all we need. There are a few other cheap bits but no need listing them.
The Wishlist Proper
Usage: Budget category is for accounting/overview purposes, and automatic totalling. By the same token Cost is cleaned line cost eg 3 * goggles at '£3-5ish' == 3*4 == £12. For specifically costed items that only one are needed of, this is a duplicate of Price.
Options:
Workshop T&E (Currently: PPE, additional tools/measures.) Workshop Machinery (Currently: bobbin sander. Planer/thicknesser, bandsaw need costing. Potentially radial arm drill also, price depending.) Workshop T&E Other (Stuff we borrow that we should probably own, eg replacement hand tools) Main Room T&E (Includes another god-tier soldering bay, CR10S, bench PSU and the laser airflow modification) Maintenance and Improvement (Currently gas fitting, which needs costing. Air filter and the workshop shelves would be good to have too) Essential Materials (wood, filament, resin, screws, glue, solder, etc.)
Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter. Big Things are usually at the base of their section.
Please do not change table structure. Javascript automatically updates '£subtotal' fields based on cell position/indexes.
Item | Type | Budget Category | Description | Rationale / Notes | Price | Cost | URL |
---|---|---|---|---|---|---|---|
Depth gauge | Measuring | Workshop T&E | Calipers for depth. | For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from. | £16.99 | £16.99 | https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge |
Carving Chisels | Woodworking | Workshop T&E | Detailed chisels for more than just straightforward wood removal | For hand carving, lathe work, and detailing. Better quality tools are certainly available, but price escalates quickly. | £21.99 | £21.99 | https://www.ebay.co.uk/itm/VonHaus-12pc-Chisel-Set-Precision-Wood-Carving-Sharpening-Stone-Storage-Pouch/272756351795 |
Encompassing goggles | Utility, PPE | Workshop T&E | Goggles with sideeye protection | Vented, and also wearable over glasses. | £4.99 | £9.98 | https://www.screwfix.com/p/site-premium-safety-goggles/9186k |
Lab coats or overalls | Utility, PPE | Workshop T&E | Protective clothing | Useful for painting, resin work, ousting Amy, and other messy activities. | £10-15. £12 * 2 ? | £24 | Sources various depending on type. I have a contact who can embroider our logo on them if desired. |
Magnet | Utility | Workshop T&E | Magnet | Useful for finding/clearing nails from the workshop floor | £5.39 | £5.39 | https://www.ebay.co.uk/itm/37-67-90KG-Recovery-Magnet-Hook-Strong-Sea-Fishing-Diving-Treasure-Hunting-NEW/311921068962 |
Fubar | Tool | Workshop T&E | Multi-purpose demolition tool | Exceptionally useful for breaking pallets down. Also effective against the undead. | £30ish | £30 | Example: https://www.ebay.co.uk/itm/STANLEY-STA155099-FatMax-Fubar-Utility-Bar-XL/352233983943 |
Angle Grinder Stand | Tool | Workshop T&E | Angle grinder + chop saw | For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs - very versatile! | £21.23 | £21.23 | https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785 |
Cross Vise | Utility | Workshop T&E | A cross vice for the drill press. | Irreplaceable for precision tasks. | £47.98 | £47.98 | https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/ |
Workshop T&E | Subtotal: | £subtotal | |||||
Radial Drill | Tool | Workshop T&E Machinery | Extendable powerful drill | Deeper throat and greater depth. Also means the current drill can be dedicated for a given purpose eg lowspeed metalwork. | £326.00 | £326.00 | https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928 |
Workshop T&E Machinery | Subtotal: | £subtotal | |||||
Replacement hand tools | Tools | Workshop T&E Other | Replacement hand tools | Close estimate for mostly costed hand tool list + a few measurement tools. | £189.46 | £189.46 | hand tools |
Angle gauge / inclinometer | Measuring | Workshop T&E Other | Calipers for angles. | Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved. | £16.59 | £16.59 | https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge |
Countersunk pilot drill bits | Woodworking | Workshop T&E Other | Drill bits | With countersinks. Attached! Saves so much time. | £7.89 | £7.89 | https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/ |
Riveter | Tool | Workshop T&E | Hand-held riveter | Also comes with variously sized rivets. | £19.84 | £19.84 | https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786 |
Engineers Calipers | Measuring | Workshop T&E Other | High calibre calipers. | Useful for many tasks involving measurement, especially try-test work - in particular the earwigs are invaluable for hollow objects & lathed bowls. | £14.39 | £14.39 | https://www.machinemart.co.uk/p/et153-3-piece-spring-caliper-set/ |
Bench vice | Utility | Workshop T&E Other | Mountable vice and small anvil for metalwork & friends | For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version] | £28.79 | £28.79 | https://www.machinemart.co.uk/p/clarke-100mm-bench-vice-cvr100b/ |
Rasp and file set | Tool | Workshop T&E Other | For subtractive handwork, especially on woods and metals | Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. | £20-60 | £40 | https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece) |
Tap and die set | Tool | Workshop T&E Other | For making threaded holes and threaded things what goes in those holes | Prices vary wildly depending where you ask versus what quality. [ * midrange set ] | £10-50 | £30 | https://www.screwfix.com/p/hss-steel-tap-and-die-set-51pc/12834 |
Workshop T&E Other | These items are currently available, but only as they've been loaned. | Subtotal: | £subtotal | ||||
3D Printer | Equipment | Main Room T&E | A reliable & accurate 3D printer | CR10S is probably the optimal choice. A CR10 alone is about £50 cheaper. Photon & Ender 3 also worth considering. | £379.88 | £379.88 | https://www.amazon.co.uk/Creality-3D-Aluminum-Upgraded-High-precisio/dp/B076BRF8S6/ |
Main Room T&E | Subtotal: | £subtotal | |||||
Under Rafter Shelves | Fitting | Maintenance and Improvement | Shelves & trays for the workshop dead space. | See section below. | £263.49 | £263.49 | Details and plans |
Maintenance and Improvement | Subtotal: | £subtotal | |||||
Non-core component kits | Consumables | Essential Materials | Other related components | Crimps, heatshrink, PCB blanks, jumpers & sockets, voltage regulators, etc | £51.36 | £51.36 | See breakdown below Details |
Useful IC chips | Consumables | Essential Materials | IC chips and sockets. | Counters, logic, flipflops, opamps, etc. | £17.58 | £17.58 | See breakdown below Details |
Resin & Friends | Consumables | Essential Materials | Resin casting equipment and essential materials | After some liaising with David, this covers everything we need for holding casting workshops. | £271.00 | £271.00 | Various suppliers |
Essential Materials | Subtotal: | £subtotal | |||||
Total | £tree.fiddy |
Note that the resin materials will pay for themselves, the workshops will charge enough to cover the usage, and over time will net more paying members.
Workshop T&E Other are hand tools that we already have, but only due to loans. Ideally we need to start owning some of the core stuff outright.
Disregarding those two figures, the total drops by £632.60 - currently to £2594.75.
Details and Rationale
Soldering Workbay
Costing assumes that NO DISCOUNT is available from Rapid. Hopefully we can wrangle something. Specific bay loadout as previously used; each bay contains:
Item | Type | Budget Category | Description | Rationale / Notes | Price | Cost | URL |
---|---|---|---|---|---|---|---|
Soldering Station | Tool | Main Room T&E | Steve’s Kitlist | Atten ST-60 Premium Intelligent Soldering Station 60W | £82.15 | £82.15 | https://www.rapidonline.com/85-6924 |
Soldering Tip | Tool | Main Room T&E | Steve’s Kitlist | Atten 900M-T-0.8 900M Series Soldering Tip Chisel 0.8mm | £2.99 | £2.99 | https://www.rapidonline.com/85-6942 |
Soldering Tip | Tool | Main Room T&E | Steve’s Kitlist | Atten 900M-T-2.4 900M Series Soldering Tip Chisel 2.4mm | £2.99 | £2.99 | https://www.rapidonline.com/85-6938 |
Soldering Tip | Tool | Main Room T&E | Steve’s Kitlist | Atten 900M-T-2C 900M Series Soldering Tip Sloped 2mm | £2.99 | £2.99 | https://www.rapidonline.com/85-6944 |
Tip Cleaner | Tool | Main Room T&E | Steve’s Kitlist | Xytronic 460 Brass Wool Solder Tip Cleaner | £4.77 | £4.77 | https://www.rapidonline.com/85-0626 |
Tip Cleaner Refill | Consumable | Main Room T&E | Steve’s Kitlist | Xytronic 459 Brass Wool Solder Tip Cleaner Refill | £1.67 | £1.67 | https://www.rapidonline.com/85-0628 |
Solder | Consumable | Main Room T&E | Steve’s Kitlist | Rapid Solder Wire 60/40 22SWG 0.7mm 100g Reel | £4.67 | £4.67 | https://www.rapidonline.com/85-0592 |
Solder | Consumable | Main Room T&E | Steve’s Kitlist | Rapid Lead-Free Solder Wire 22SWG 0.7mm 100g Reel | £5.09 | £5.09 | https://www.rapidonline.com/85-1166 |
Pliers | Tool | Main Room T&E | Steve’s Kitlist | CK Tools T3889 Ecotronic ESD Long Snipe Nose Pliers | £9.99 | £9.99 | https://www.rapidonline.com/93-3421 |
Cutters | Tool | Main Room T&E | Steve’s Kitlist | CK Tools T3887 Ecotronic ESD Side Cutters | £10.40 | £10.40 | https://www.rapidonline.com/93-3419 |
Lamp | Tool | Main Room T&E | Steve’s Kitlist | Xytronic JF-33CB Superior Illuminated Lamp | £69.33 | £69.33 | https://www.rapidonline.com/86-3333 |
Power Supply | Tool | Main Room T&E | Steve’s Kitlist | Uni-T UTP3705S 0-32V 5A DC Power Supply 2 Channel | £178.94 | £178.94 | https://www.rapidonline.com/85-4048 |
Multimeter | Tool | Main Room T&E | Steve’s Kitlist | Uni-T Intelligent Digital Multimeters UT71B | £118.73 | £118.73 | https://www.rapidonline.com/85-4065 |
Screwdriver Set | Tool | Main Room T&E | Steve’s Kitlist | Wera 05030170001 1578A/6 6-Piece ESD Kraftform Micro Screwdriver Set | £20.06 | £20.06 | https://www.rapidonline.com/54-7139 |
Ruler | Tool | Main Room T&E | Steve’s Kitlist | CK Tools T3530 12 Steel Rule 300mm/12" | £6.23 | £6.23 | https://www.rapidonline.com/86-1480 |
Stabby Thing | Tool | Main Room T&E | Steve’s Kitlist | Stanley 0-10-150 SM9 Snap Off Blade Knife 9mm | £1.82 | £1.82 | https://www.rapidonline.com/86-0054 |
Refill for Stabby Thing | Consumable | Main Room T&E | Steve’s Kitlist | Stanley 0-11-300 Snap Off Replacement Blades 9mm - Pack Of 10 | £2.78 | £2.78 | https://www.rapidonline.com/86-0055 |
Total cost: £525.60
New Stuff
- Budget Metalworking Total ($blocktotal); http://amzn.eu/d/2NBAijT £229.08 Tig/mma Air Plasma Cutter http://amzn.eu/d/f1pyRxV £17.54 Welding Helmet Auto Darkening http://amzn.eu/d/iyQ0F4m £4.16 Welders Gauntlets http://amzn.eu/d/04DCsd1 £15.70 Welding Clamps http://amzn.eu/d/gCLqVS3 £7.48 Welding Magnets x4 http://amzn.eu/d/dX2qx56 £2.50 Arc Welding Rods
- Ideal Metalworking Total ($blocktotal); https://www.r-techwelding.co.uk/tig-mma-welder-dc-pulse-200a-digital-110v-240v/ £549.00 R-Tech TIG Welder DC Digital https://www.r-techwelding.co.uk/r-tech-speedmaster-xl-auto-welding-helmet/£54.95 Welding Helmet https://www.r-techwelding.co.uk/prestige-silver-leather-tig-welding-glove/£6.50 Welding Gloves https://www.r-techwelding.co.uk/1kg-4043a-grade-aluminium-1-6mm-tig-filler-rods/ £10.95 Aluminium Tig Filler Rods https://www.r-techwelding.co.uk/1kg-mild-steel-1-0mm-tig-filler-rod/ £14.90 Steel TIG Filler Rods
- Blacksmithing (awaiting information on possible donations/loanations/purchase opportunities)
Anvil, heavier the better - cheap Chinese have reputation of being made of cast iron, ie. non-heattreated and soft, don’t go that way. East-Europeans etc. are usually OK. The anvil needs a proper block under it, and ideally a horn. Railway track can be used to make smaller specific-purpose anvils. Some anvil tools are needed, cutting wedge and iron plate for hot-cutting. Hammers & tongs - more the merrier - and for once, here diversity is a good thing! Minimal core; 1kg, 1,5kg and a 2 kg straight peen blacksmiths hammers, a couple smaller ball peen hammers and some basic tongs should suffice for a start. Mole grips/clamps also handy. Working tables, at least one with a metal surface. Need to think about weatherproofing. The actual forge. Probably gas powered tube-forge for efficiency, no reason we couldn't make another size later if needed. A few vices are a must. Some literature about the craft would come handy too A power hammer would be amazing, and save us pissing the neighbors off.
- Sharable with the metalshop:
Some sort of fixed grinder - stone or belt sander. Fixed vertical drill. Loads of hand tools, angle grinders of different sizes, files, metal brushes, pliers, hack-saws, etc. Protection stuff, goggles, respirators, earmuffs, maybe panzers or coveralls too. Table mounted sheet metal cutter?
Materials / Consumables.
- Shrapnel kits Total ($blocktotal); https://www.screwfix.com/p/easyfix-round-oval-bright-nails-assorted-pack-x-4kg-pack/14989 £15.99 Nails. Lots. https://www.screwfix.com/p/silverscrew-pz-double-countersunk-woodscrews-grab-pack-1000-pcs/67663 £11.99 1000 screws https://www.screwfix.com/p/easyfix-bright-zinc-plated-mixed-machine-screws-750-piece-set/8386k £14.99 Machine screws https://www.screwfix.com/p/easyfix-bright-zinc-plated-mixed-bolts-nuts-washers-pack-500-piece-set/2526k £16.99 Nuts, bolts, washers
- Core component kits ($blocktotal); (not costed a box to store/sort them in. will make something from MDF probably) 140pcs Momentary switches £3.20 https://www.banggood.com/140pcs-14-Types-Momentary-Tact-Tactile-Push-Button-Switch-SMD-Assortment-Kit-Set-p-1018684.html?cur_warehouse=CN 100pcs Toggle switches £2.03 https://www.banggood.com/100pcs-SS12d00G4-2-Gear-3-Pin-Toggle-Switch-Slide-Switch-Interruptor-On-Off-Handle-Length-4mm-p-1212311.html?rmmds=detail-bottom-alsobought__3&cur_warehouse=CN 1000pcs Ceramic caps £3.38 https://www.ebay.co.uk/itm/Lot-of-1000Pcs-Set-Kits-50values-50V-Ceramic-Capacitor-Assorted-Kit-Assortment/172645382890 600pcs Electrolytic capacitor kit £10.96 https://www.banggood.com/600pcs-0_1-220uF-15-Value-Electrolytic-Capacitor-Assortment-Box-Kit-p-1205557.html?rmmds=buy&cur_warehouse=CN 100pcs Diodes £2.02 https://www.banggood.com/100pcs-8-Values-Diode-Bag-Assortment-Kit-1N4148-FR107-1N5408-For-Arduino-p-1031130.html 300pcs Zener diodes £2.70 https://www.ebay.co.uk/itm/300-Pieces-Assortment-Set-2V-39V-30-Values-1-2W-0-5W-Zener-Diode-Assorted-Kit/381536097272 100pcs Trimpots £3.29 https://www.ebay.co.uk/itm/100x-10-value-Variable-Resistors-Potentiometer-Assortment-Kit-Box-500ohm-Pop/302541252030 1500pcs Resistors (actually sorted) £5.59 https://www.banggood.com/1500Pcs-14W-5-Carbon-Film-Resistor-75-Values-Assorted-Kit-1-ohm10M-ohm-Range-p-1079582.html?rmmds=category&cur_warehouse=CN 750pcs LED 3mm mixed colours £5.68 https://www.banggood.com/750Pcs-3mm-Diodes-LED-Light-Yellow-Red-Blue-Green-White-Assortment-DIY-Kit-p-1129688.html?rmmds=category&cur_warehouse=CN 600pcs NPN&PNP mixed kit £5.03 https://www.banggood.com/600Pcs-TO-92-NPN-PNP-Bipolar-Transistor-15-Value-Assortment-Kit-p-1098096.html?rmmds=search 50pcs Photoresistors £2.58 https://www.ebay.co.uk/itm/50pcs-5-types-10pcs-Photoresistor-Kit-Dependent-Light-Resistor-LDR-PackCC/273292556330 120pcs Inductors £2.20 https://www.banggood.com/14W-1UH-1MH-120pcs-12-Values-0307-Color-Ring-Inductor-Pack-Color-Code-Inductor-10pcs-Each-Value-p-1174702.html?rmmds=search&cur_warehouse=CN 100pcs 555 chips £1.18 https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139
- Non-core components and friends ($blocktotal); 40pcs PCB Blanks £6.94 https://www.banggood.com/40pcs-FR-4-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-995732.html?rmmds=detail-top-buytogether-auto__4&cur_warehouse=CN 328pcs Heatshrink tubing £3.39 https://www.banggood.com/Soloop-328pcs-21-Polyolefin-Halogen-Free-Heat-Shrink-Tube-Sleeving-5-Color-8-Size-p-969574.html?rmmds=detail-top-buytogether-auto__8&cur_warehouse=CN 1000pcs Crimps and terminals £14.18 https://www.banggood.com/1000Pcs-Electrical-Wire-Connector-Insulated-Crimp-Terminals-Spade-Assorted-Set-p-1060461.html?rmmds=category&cur_warehouse=CN 600pcs M1-1.6 nut & screw set £2.59 https://www.ebay.co.uk/itm/600Pcs-12-Kinds-Of-Nuts-Screws-Electronics-Assortment-M1-M1-2-M1-4-M1-6-Kit/262802755687 82pcs USB Connectors £6.54 https://www.banggood.com/14-Styles-USB-Male-Female-Mini-SMD-Vertical-Socket-Connector-For-DIY-p-1099042.html?rmmds=category&cur_warehouse=CN 310pcs Jumper pins and connectors £2.93 https://www.banggood.com/Geekcreit-310pcs-2_54mm-Male-Female-Dupont-Wire-Jumper-With-Header-Connector-Housing-Kit-p-1063303.html?rmmds=detail-top-buytogether-auto__3&cur_warehouse=CN 10pcs (*40) Header pins £1.04 https://www.banggood.com/10-Pcs-40-Pin-2_54mm-Single-Row-Male-Pin-Header-Strip-For-Arduino-p-918427.html?rmmds=detail-top-buytogether-auto__3&cur_warehouse=CN 50pcs Power jack sockets £1.30 https://www.banggood.com/50pcs-DC-005-3Pin-Black-DC-Power-Jack-Socket-Connector-5_52_1mm-p-1127042.html?rmmds=category&cur_warehouse=CN 10pcs MD2307 voltage regulators £2.86 https://www.ebay.co.uk/itm/10X-Supper-mini-3A-DC-DC-Converter-Step-Down-buck-Power-3-5-16V-MP2307-Chip-V1B3/282726121311 70pcs L7805-LM317 asst. voltage regulators £9.59 https://www.ebay.co.uk/itm/70Pcs-L7805-LM317-14-Values-Transistor-Kit-Voltage-Regulator-With-Storage-Box/292120327676 10pcs Optocouplers £0.99 https://www.ebay.co.uk/itm/10Pcs-PCB-Board-Through-Hole-PC817C-PC817-EL817-817C-Optocoupler-DIP-4-N6R/182529906377?hash=item2a7fa156c9:g:aGIAAOSwmgJY8JjD 50pcs Voltage references £0.99 https://www.ebay.co.uk/itm/50PCS-TL431A-TL431-TO92-Programmable-Voltage-Reference-NEW/191739488688?
- Useful IC chips, and sockets; lots and cheap ($blocktotal); £0.99 https://www.ebay.co.uk/itm/20Pcs-SOP-16-ULN2003-ULN2003A-Darl-Trans-Array-Ti/113005586175?hash=item1a4fa866ff:g:Bh8AAOSwSCZbPx6R £1.18 https://www.ebay.co.uk/itm/10pcs-CD4511-CD4511BE-4511-CMOS-BCD-to-7-segment-Latch-Decoder-IC-RGZY/153034986927?hash=item23a19895af:g:i6wAAOSwN-la9TRg £0.99 https://www.ebay.co.uk/itm/10PCS-TL082-TI-DIP8-IC-JFET-INPUT-OPERATIONAL-AMPLIFIERS/191773766157?hash=item2ca69b720d:g:Qx8AAOSwGotWiN1d £0.99 https://www.ebay.co.uk/itm/10Pcs-TL084-TL084CN-DIP-14-Quad-JFET-Input-Op-Amp-IC-NEW/191821307714?epid=1488761590&hash=item2ca970df42:g:iwMAAOSwP~tW3U5y £0.99 https://www.ebay.co.uk/itm/10-Pcs-LM324N-LM324-324-Low-Power-Quad-Op-Amp-IC-TOP/253108878435?hash=item3aee76fc63:g:6tIAAOSwWLFZm9XP £0.99 https://www.ebay.co.uk/itm/10Pcs-Operational-Amplifier-DIP-8-UA741-LM741-St-UA741CN-New-Ic/382468615537?hash=item590ce7ed71:g:XxwAAOSwvrxbQjBt £1.23 https://www.ebay.co.uk/itm/10PCS-CD4040-4040-Ripple-Carry-Binary-Counter-Divider-IC-NEW/311518155397?hash=item4887edd285:g:UooAAOSwJkJWiyUl £2.69 https://www.ebay.co.uk/itm/50Pcs-Smd-Counter-Divider-SOP-16-CD4017-4017-Ic-New/382468616355?hash=item590ce7f0a3:g:cmEAAOSwHlRbQjDZ £2.10 https://www.ebay.co.uk/itm/20PCS-CD4093BE-CD4093-4093-DIP-14-TI-CHIP-IC-new/142650976792?hash=item2136a92a18:g:hTwAAOSwH6lXQukL £1.49 https://www.ebay.co.uk/itm/100PCS-8-Pin-DIP8-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/191738593245?hash=item2ca482bfdd:g:-BsAAOSwcdBWSEF8 £1.40 https://www.ebay.co.uk/itm/50PCS-16-Pin-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/141663389081 £2.54 https://www.ebay.co.uk/itm/5PCS-L293D-L293-Push-Pull-Four-Channel-Motor-Driver-IC-DIP-16-EC/192583520097
- Still to cost: Workshop consumables Wood glue Super glue Duct tape Sandpaper Sanding sponges; Festool ones seem good WD40 3-in-1
- Kitchen etc - cleaning materials - teabags / coffee - blueroll
- Wood dyes, paints? Steve said some were missing - if I know which we can replace them? Spray paint is always useful eventually. A good ebony dye would be very nice.
To research / add:
Passive air filtration. Bloody useful and it could be considered under a few grant budget headings as accountancy requires. http://www.axminster.co.uk/jet-afs-500-air-filtration-system-310483 £304.25 - or one twice as effective for £90 more - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 £394.04 Other options are certainly available. Filters and mounting gubbins will also be needed for whichever is chosen.
Screen printing equipment has been suggested. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably subject expertise could research this I'd appreciate it, I'm oversaturated with research as it is and it's not one of the areas I've worked with (unbelievable but true).
A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.
Resin paraphernalia.
Building infrastructure
The Under Rafter shelves
Total: $blocktotal Ply, assume 18x1220x2440mm 5 * £34.99 ; £174.93 (a lot of flat surface to cover here) CLS, 3 * £2.50 ; £7.50 Casters, assume 8 bays * £4.29 pack 4 casters ; £34.32 Screws, 500 * 1; £4.99
CLS: 45cm * 7 * 2; 6.3m / 2.4m = 3 beams; £7.50. If we need support under, 2 * 5.6 = 11.2 / 2.4m = 5 beams; +£12.50
Plywood: 80cm * 120cm * 6 = 2 sheets, 5.6m * 80cm = +3 sheets. Technically can do 2 sheets but the joints would be everywhere.
It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though. Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.
Main Room Additions
- Sharpies.
- More drawing equipment - I've equipped us with basic geometry and stationery, but curve rulers would be excellent.
- Cutting mats
- Metal rulers with nonslip backing
- Actual scalpels, and a more rugged general craft knife
Craft 'starter kits'
To expand options. Note that many of these tools are cross purpose.
- Leatherwork
- Wirework
- Sculpting/waxwork
- Casting
- Papercraft
- Painting/finishing. Brushes, pallets and solvents etc.
- Fabric/textiles.
Workshop Equipment
Hand tools
Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available.
Wilko Combination Square 305mm * 2 £12.00 Wilko Centre Punch 2pieces £2.75 Wilko Bradawl 140mm £1.50 Wilko Nail Punch 2pieces £3.00 Wilko Gimlet 8mm £2.25 Stanley Plier Set 3 Piece £15.00 Wilko Combination Spanner Set 6piece £8.00 Wilko Locking Wrench Drop Forged 254mm £5.00 Wilko Professional Hacksaw 12in £8.75 Wilko Coping Saw Blades 5 Assorted £6.00 Wilko Screw Puller 6 x 100mm £2.00 Wilko Hand Saw Soft Grip Handle 550mm £7.00 Wilko Junior Hacksaw 6in £3.50 Wilko Tenon Saw Soft Grip Handle 250mm £5.00 Wilko Double Drive Screwdriver Set 49 Piece £20.00 Wilko Allen Key 14pieces £4.00 Wilko Pin Hammer 4oz £5.25 Wilko Ball Pein Hammer 8oz £7.00 Wilko Claw Hammer Fibreglass 16oz £6.50 Wilko Carpenters Pincers Drop Forged 6in £4.00 Wilko Wood Chisel Set £6.00 Wilko Straight Cut Aviation Snips 10in £5.50 Tri mitre square £4.50 Wilko Interior Mallet 16oz £4.50 Wilko Sledge Hammer 3Lb £12.00 Wilko Wooden Mallet 4in £4.25
Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a semi-organised heap on the floor.
Current total £165.25.
I'd suggest that we keep the current toolbags around for now, but that any tools used from them are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.
Other useful related things:
- http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398 £9.99
- Metric speed square https://www.ebay.co.uk/itm/7-Metric-Aluminum-Alloy-Speed-Square-Roofing-Triangle-Angle-Protractor-Ruler/132389623025?epid=916183692&hash=item1ed30954f1:g:Wt4AAOSw9hdaALFK £4.31
- Dedicated workshop-only use digital calipers; https://www.ebay.co.uk/itm/Digital-Vernier-Caliper-Stainless-Steel-Gauge-LCD-Measuring-Tool-Caliper-Gauge/152611671649 £9.80 (or £1 cheaper from China)
Current total £24.21