Difference between revisions of "Wishlist"
From ipswichmakerspace
| Line 11: | Line 11: | ||
|- | |- | ||
! scope="col"| Item | ! scope="col"| Item | ||
| + | ! scope="col"| Type | ||
! scope="col"| Description | ! scope="col"| Description | ||
! scope="col"| Rationale / Notes | ! scope="col"| Rationale / Notes | ||
| Line 16: | Line 17: | ||
! scope="col"| URL | ! scope="col"| URL | ||
|- | |- | ||
| + | |||
! scope="row"| Planer / Thicknesser | ! scope="row"| Planer / Thicknesser | ||
| − | | Woodworking | + | | Woodworking Machine |
| + | | Machine for turning rough stock into joinable uniform planks | ||
| With a supply of pallets, this will provide us with as much lumber as we need for most purposes. Which machine is the best choice really depends how much budget we can throw at it... there are options either side, but cheaper you have very mixed reviews, or lose the planer / jointer capabilities. With this one we will need to buy or make a stand/trolley as well. | | With a supply of pallets, this will provide us with as much lumber as we need for most purposes. Which machine is the best choice really depends how much budget we can throw at it... there are options either side, but cheaper you have very mixed reviews, or lose the planer / jointer capabilities. With this one we will need to buy or make a stand/trolley as well. | ||
| £346 | | £346 | ||
| https://www.machinemart.co.uk/p/clarke-cpt1000-254mm-10-planer-thicknesser/ | | https://www.machinemart.co.uk/p/clarke-cpt1000-254mm-10-planer-thicknesser/ | ||
|- | |- | ||
| + | |||
! scope="row"| Table vice | ! scope="row"| Table vice | ||
| + | | Utility | ||
| Flush vice for planing and general heavy duty holding | | Flush vice for planing and general heavy duty holding | ||
| We currently have but one vice, which can cause queues, especially as it's right next to the power tool bench. This particular model has a dog too, allowing large sheets to be clamped horizontally using the bench itself. | | We currently have but one vice, which can cause queues, especially as it's right next to the power tool bench. This particular model has a dog too, allowing large sheets to be clamped horizontally using the bench itself. | ||
| Line 28: | Line 33: | ||
| https://www.machinemart.co.uk/p/52pd-175mm-wood-workers-vice/ | | https://www.machinemart.co.uk/p/52pd-175mm-wood-workers-vice/ | ||
|- | |- | ||
| + | |||
! scope="row"| Bench vice | ! scope="row"| Bench vice | ||
| + | | Utility | ||
| Mountable vice and small anvil for metalwork & friends | | Mountable vice and small anvil for metalwork & friends | ||
| For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version] | | For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version] | ||
| Line 36: | Line 43: | ||
! scope="row"| Angle gauge / inclinometer | ! scope="row"| Angle gauge / inclinometer | ||
| + | | Measuring | ||
| Calipers for angles. | | Calipers for angles. | ||
| Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved. | | Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved. | ||
| Line 44: | Line 52: | ||
! scope="row"| Depth gauge | ! scope="row"| Depth gauge | ||
| + | | Measuring | ||
| Calipers for depth. | | Calipers for depth. | ||
| For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from. | | For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from. | ||
| Line 53: | Line 62: | ||
! scope="row"| | ! scope="row"| | ||
| + | | | ||
| | | | ||
| | | | ||
| Line 60: | Line 70: | ||
| + | ! scope="row"| | ||
| + | | | ||
| + | | | ||
| + | | | ||
| + | | £ | ||
| + | | | ||
| + | |- | ||
! scope="row"| | ! scope="row"| | ||
| + | | | ||
| | | | ||
| | | | ||
| Line 68: | Line 86: | ||
| | | | ||
|- | |- | ||
| − | |||
! scope="row"| | ! scope="row"| | ||
| + | | | ||
| | | | ||
| | | | ||
| Line 77: | Line 95: | ||
| | | | ||
|- | |- | ||
| − | |||
! scope="row"| | ! scope="row"| | ||
| + | | | ||
| | | | ||
| | | | ||
| Line 86: | Line 104: | ||
| | | | ||
|- | |- | ||
| − | |||
! scope="row"| | ! scope="row"| | ||
| + | | | ||
| | | | ||
| | | | ||
| Line 95: | Line 113: | ||
| | | | ||
|- | |- | ||
| + | |||
| + | |||
! scope="row"| Countersunk pilot drill bits | ! scope="row"| Countersunk pilot drill bits | ||
| + | | Woodworking | ||
| Drill bits | | Drill bits | ||
| With countersinks. Attached! Saves so much time. | | With countersinks. Attached! Saves so much time. | ||
| Line 108: | Line 129: | ||
! scope="row"| Titanium step drills | ! scope="row"| Titanium step drills | ||
| + | | Tool | ||
| Drill bits with multiple steps for incrementally larger holes. | | Drill bits with multiple steps for incrementally larger holes. | ||
| − | | Useful for | + | | Useful for basically any material, and by nature will also deburr the holes. [* One is available] |
| £8.99 | | £8.99 | ||
| https://www.amazon.co.uk/Zacro-Titanium-Drill-Automatic-Center/dp/B01J590QVE/ref=pd_rhf_se_s_cp_0_37?_encoding=UTF8&pd_rd_i=B01J590QVE&pd_rd_r=FQSABW3M97PP6YT6KBT5&pd_rd_w=SJqhM&pd_rd_wg=yLV96&psc=1&refRID=FQSABW3M97PP6YT6KBT5 | | https://www.amazon.co.uk/Zacro-Titanium-Drill-Automatic-Center/dp/B01J590QVE/ref=pd_rhf_se_s_cp_0_37?_encoding=UTF8&pd_rd_i=B01J590QVE&pd_rd_r=FQSABW3M97PP6YT6KBT5&pd_rd_w=SJqhM&pd_rd_wg=yLV96&psc=1&refRID=FQSABW3M97PP6YT6KBT5 | ||
| Line 116: | Line 138: | ||
! scope="row"| Coping / fret saw | ! scope="row"| Coping / fret saw | ||
| + | | Tool | ||
| Deep throated saw for fiddly cutting tasks | | Deep throated saw for fiddly cutting tasks | ||
| − | | Currently we have no detail work saw aside from the jewelers saw, which is too detailed! | + | | Currently we have no detail work saw aside from the jewelers saw, which is too detailed! * |
| £10/15ish | | £10/15ish | ||
| Eg: https://www.screwfix.com/p/bahco-301-ph-coping-saw/4659d | | Eg: https://www.screwfix.com/p/bahco-301-ph-coping-saw/4659d | ||
| Line 125: | Line 148: | ||
! scope="row"| Rasp and file set | ! scope="row"| Rasp and file set | ||
| − | | For subtractive handwork on woods and metals | + | | Tool |
| − | | Since we have none to speak of, other than Adam's old | + | | For subtractive handwork, especially on woods and metals |
| + | | Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. * | ||
| £20-60 | | £20-60 | ||
| https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece) | | https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece) | ||
|- | |- | ||
| + | |||
| + | |||
| + | |||
| + | ! scope="row"| Tap and die set | ||
| + | | Tool | ||
| + | | For making threaded holes and threaded things what goes in those holes | ||
| + | | Prices vary wildly depending where you ask versus what quality. [ * mine is a midrange set ] | ||
| + | | £10-50 | ||
| + | | https://www.screwfix.com/p/hss-steel-tap-and-die-set-51pc/12834 | ||
| + | |- | ||
| + | |||
| Line 139: | Line 174: | ||
| | | | ||
|- | |- | ||
| − | |||
| − | |||
Revision as of 23:46, 17 January 2018
The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.
Please note that articles with * are items Adam has and can eventually long-term loan to the space.
Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.
David has been contacted for advice about resin equipment and what we should look for as a basic loadout; he's offered to drop in one day to discuss it. He's also suggested a casting workshop at some point this year.
| Item | Type | Description | Rationale / Notes | Price | URL |
|---|---|---|---|---|---|
| Planer / Thicknesser | Woodworking Machine | Machine for turning rough stock into joinable uniform planks | With a supply of pallets, this will provide us with as much lumber as we need for most purposes. Which machine is the best choice really depends how much budget we can throw at it... there are options either side, but cheaper you have very mixed reviews, or lose the planer / jointer capabilities. With this one we will need to buy or make a stand/trolley as well. | £346 | https://www.machinemart.co.uk/p/clarke-cpt1000-254mm-10-planer-thicknesser/ |
| Table vice | Utility | Flush vice for planing and general heavy duty holding | We currently have but one vice, which can cause queues, especially as it's right next to the power tool bench. This particular model has a dog too, allowing large sheets to be clamped horizontally using the bench itself. | £53.99 | https://www.machinemart.co.uk/p/52pd-175mm-wood-workers-vice/ |
| Bench vice | Utility | Mountable vice and small anvil for metalwork & friends | For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version] | £28.79 | https://www.machinemart.co.uk/p/clarke-100mm-bench-vice-cvr100b/ |
| Angle gauge / inclinometer | Measuring | Calipers for angles. | Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved. | £16.59 | https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge |
| Depth gauge | Measuring | Calipers for depth. | For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from. | £16.99 | https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge |
| £ | |||||
| £ | |||||
| £ | |||||
| £ | |||||
| £ | |||||
| £ | |||||
| Countersunk pilot drill bits | Woodworking | Drill bits | With countersinks. Attached! Saves so much time. | £7.89 | https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/ref=pd_rhf_se_s_cp_0_8?_encoding=UTF8&pd_rd_i=B01HCHRMOU&pd_rd_r=FQSABW3M97PP6YT6KBT5&pd_rd_w=SJqhM&pd_rd_wg=yLV96&psc=1&refRID=FQSABW3M97PP6YT6KBT5 |
| Titanium step drills | Tool | Drill bits with multiple steps for incrementally larger holes. | Useful for basically any material, and by nature will also deburr the holes. [* One is available] | £8.99 | https://www.amazon.co.uk/Zacro-Titanium-Drill-Automatic-Center/dp/B01J590QVE/ref=pd_rhf_se_s_cp_0_37?_encoding=UTF8&pd_rd_i=B01J590QVE&pd_rd_r=FQSABW3M97PP6YT6KBT5&pd_rd_w=SJqhM&pd_rd_wg=yLV96&psc=1&refRID=FQSABW3M97PP6YT6KBT5 |
| Coping / fret saw | Tool | Deep throated saw for fiddly cutting tasks | Currently we have no detail work saw aside from the jewelers saw, which is too detailed! * | £10/15ish | Eg: https://www.screwfix.com/p/bahco-301-ph-coping-saw/4659d |
| Rasp and file set | Tool | For subtractive handwork, especially on woods and metals | Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. * | £20-60 | https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece) |
| Tap and die set | Tool | For making threaded holes and threaded things what goes in those holes | Prices vary wildly depending where you ask versus what quality. [ * mine is a midrange set ] | £10-50 | https://www.screwfix.com/p/hss-steel-tap-and-die-set-51pc/12834 |
| £ | |||||
| Total | $1.90 | ||||
Things that would be very nice but we can probably build or bodge:
https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/ £47.98 , solid cross vice. Adam is currently brewing something out of scraps and dreams for the drill press but it won't be as sturdy!
https://www.screwfix.com/p/triton-tsps450-450w-oscillating-spindle-sander-240v/1417k £120 , Bobbin sander. Wonderful for anything non-flat, but we could in theory make our own.
