Current wishlist

From ipswichmakerspace
Revision as of 01:49, 14 July 2018 by Areid (Talk | contribs) (→‎Awaiting input)

Jump to: navigation, search

This page is a hybrid of the old Council Grant page, which was mainly core items for about £2k, and the current/Lottery Grant wishlist, which is more optimistic and includes infrastructure. Once Things have Settled, the Wishlist can then be reconfigured, taking any recent developments into account.

Notes:

Page Intent

(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)

Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment. The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!

Awaiting input

David has promised a resin kitlist. He's also suggested a casting workshop at some point this year. Some discussion is needed as to what balance of materials we should get there. Some expire over time, but are cheaper bought in bulk. My leading suggestions are either that we buy perishables from David as needed, or if demand allows us to buy in bulk, sell him anything that's likely to expire soon so he can use it before it does.

Workshop materials

As in materials for running workshops, to get people interested. Ideas have so far included laser box making, silver jewellery casting, and resin casting (David).

First priority is working out what workshops we wish to run. Second is if we want to bother explicitly costing them, or just fund them from the float & repay that from the day's fees. We do however need enough stock material and equipment on hand for the process.

Resin requires little more than we currently have, other than the resin itself, and PPC, eg nitrile gloves & more labcoats. Laser boxes require absolutely nothing new - hopefully this can be a regular workshop if it goes well.

Silver casting; gas, a blowtorch, a crucible, and an old saucepan full of sand are all we need. There are a few other cheap bits but no need listing them.

The Wishlist Proper

Usage: Budget category is for accounting/overview purposes, and automatic totalling. By the same token Cost is cleaned line cost eg 3 * goggles at '£3-5ish' == 3*4 == £12. For specifically costed items that only one are needed of, this is a duplicate of Price.

Options: 

 Woodworking T&E (Currently: PPE, additional tools/measures, and starting on replacement hand tools.)
 Woodworking Machinery (Currently: bobbin sander. Planer/thicknesser, bandsaw need costing. Potentially radial arm drill also, price depending.)
 Main Room T&E (Includes another god-tier soldering bay)
 Maintenance and Improvement (Currently gas fitting, which needs costing, and the air filter, which doesn't)
 Essential Materials (wood, filament, resin, screws, glue, solder, etc.)

Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter. Big Things are usually at the base of their section.

Please do not change table structure. Javascript automatically updates '£subtotal' fields based on cell position/indexes.

Specific input needed:

Woodstock, paints and finishes. Any more needed?
Lathe tools. At the least, a roughing gouge of our own would be prudent.


Item Type Budget Category Description Rationale / Notes Price Cost URL
Angle gauge / inclinometer Measuring Woodworking T&E Calipers for angles. Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved. £16.59 £16.59 https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge
Depth gauge Measuring Woodworking T&E Calipers for depth. For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from. £16.99 £16.99 https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge
Carving Chisels Woodworking Woodworking T&E Detailed chisels for more than just straightforward wood removal For hand carving, lathe work, and detailing. Better quality tools are certainly available, but price escalates quickly. £21.99 £21.99 https://www.ebay.co.uk/itm/VonHaus-12pc-Chisel-Set-Precision-Wood-Carving-Sharpening-Stone-Storage-Pouch/272756351795
Face shield Utility, PPE Woodworking T&E For use when lathing, grinding etc. X2 The goggles, they do nothing! £6.99 £13.98 https://www.screwfix.com/p/face-shield-clear/6540d
Encompassing goggles Woodworking T&E Utility, PPE Goggles with sideeye protection Vented, and also wearable over glasses. £4.99 £9.98 https://www.screwfix.com/p/site-premium-safety-goggles/9186k
Disposable Gloves Utility, PPE Woodworking T&E 100 pack of disposable nitrile Gloves These also have the benefit of not reacting adversely with resin components £4.99 £4.99 https://www.screwfix.com/p/wallace-cameron-nitrile-powder-free-disposable-gloves-black-medium-100-pack/9515t
Lab coats or overalls Utility, PPE Woodworking T&E Protective clothing Useful for painting, resin work, ousting Amy, and other messy activities. £10-15. £12 * 2 ? £24 Sources various depending on type. I have a contact who can embroider our logo on them if desired.
Magnet Utility Woodworking T&E Magnet Useful for finding/clearing nails from the workshop floor £5.39 £5.39 https://www.ebay.co.uk/itm/37-67-90KG-Recovery-Magnet-Hook-Strong-Sea-Fishing-Diving-Treasure-Hunting-NEW/311921068962
Fubar Tool Woodworking T&E Multi-purpose demolition tool Exceptionally useful for breaking pallets down. Also effective against the undead. £30ish £30 Example: https://www.ebay.co.uk/itm/STANLEY-STA155099-FatMax-Fubar-Utility-Bar-XL/352233983943
Countersunk pilot drill bits Woodworking Woodworking T&E Drill bits With countersinks. Attached! Saves so much time. £7.89 £7.89 https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/
Titanium step drills Tool Woodworking T&E Drill bits with multiple steps for incrementally larger holes. Useful for basically any material, and by nature will also deburr the holes. [* One is available] £8.99 £8.99 https://www.amazon.co.uk/Zacro-Titanium-Drill-Automatic-Center/dp/B01J590QVE/
Coping / fret saw Tool Woodworking T&E Deep throated saw for fiddly cutting tasks Currently we have no detail work saw aside from the jewellers saw, which is too detailed! * £10/15ish £12.50 Eg: https://www.screwfix.com/p/bahco-301-ph-coping-saw/4659d or https://www.screwfix.com/p/bahco-fret-saw-5-130mm/5581k
Digital Calipers Measuring Workshop T&E Calipers The duels for the only metal set are getting out of hand. £9.90 £9.90 https://www.ebay.co.uk/itm/Digital-Vernier-Caliper-Stainless-Steel-Gauge-LCD-Measuring-Tool-Caliper-Gauge/152611671649
Metal Detector Utility Workshop T&E Hand-held metal detector For scanning for nails in recovered timber / anything going near the thicknesser. £7.89 £7.89 http://www.ebay.co.uk/itm/New-Portable-Hand-Held-Metal-Security-Detector-Super-Scanner-Meter-OL2-/172959417810
Riveter Tool Workshop T&E Hand-held riveter Also comes with variously sized rivets. £19.84 £19.84 https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786
Angle Grinder Stand Tool Workshop T&E Angle grinder + chop saw For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs - very versatile! £21.23 £21.23 https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785
Cross Vise Utility Workshop T&E A cross vice for the drill press. Irreplaceable for precision tasks. £47.98 £47.98 https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/
Hand tools Tools Workshop T&E Replacement hand tools Close estimate for mostly costed hand tool list + a few measurement tools. £189.46 £189.46 hand tools
Workshop T&E Subtotal: £subtotal
Bobbin Sander Machine Workshop T&E Machinery A bobbin sander Sands curves and other odd shapes. £199.99 £199.99 https://www.screwfix.com/p/triton-tsps450-450w-oscillating-spindle-sander-240v/1417k
Bandsaw Tool Workshop T&E Machinery Beefy bandsaw The Makita is no long available. I will be making contact with Axminster again and seeing what might be available at cheaper than usual prices. £0.00 £0.00  ????
Radial Drill Tool Workshop T&E Machinery Extendable powerful drill Deeper throat and greater depth. Also means the current drill can be dedicated for a given purpose eg lowspeed metalwork. £326.00 £326.00 https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928
Planer / Thicknesser Woodworking Machine Woodworking T&E Machinery Machine for turning rough stock into joinable uniform planks With a supply of pallets, this will provide us with as much lumber as we need for most purposes. Which machine is the best choice really depends how much budget we can throw at it... there are options either side, but cheaper you have very mixed reviews, or lose the planer / jointer capabilities. With this one we will need to buy or make a stand/trolley as well. £346 £346 https://www.machinemart.co.uk/p/clarke-cpt1000-254mm-10-planer-thicknesser/
Workshop T&E Machinery Subtotal: £subtotal
Engineers Calipers Measuring Woodworking T&E Other High calibre calipers. Useful for many tasks involving measurement, especially try-test work - in particular the earwigs are invaluable for hollow objects & lathed bowls. * £14.39 £14.39 https://www.machinemart.co.uk/p/et153-3-piece-spring-caliper-set/
Bolt Cutters Tool Woodworking T&E Other Cutters for bolts and similar devices We lack anything more than tinsnips. * £12.99 £12.99 https://www.screwfix.com/p/forge-steel-bolt-cutters-30/3489c
Bench vice Utility Woodworking T&E Other Mountable vice and small anvil for metalwork & friends For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version] £28.79 £28.79 https://www.machinemart.co.uk/p/clarke-100mm-bench-vice-cvr100b/
Rasp and file set Tool Woodworking T&E Other For subtractive handwork, especially on woods and metals Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. * £20-60 £40 https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece)
Tap and die set Tool Woodworking T&E Other For making threaded holes and threaded things what goes in those holes Prices vary wildly depending where you ask versus what quality. [ * midrange set ] £10-50 £30 https://www.screwfix.com/p/hss-steel-tap-and-die-set-51pc/12834
Woodworking T&E Other Subtotal: £subtotal
Soldering Station Tool Main Room T&E Steve’s Kitlist Soldering workbay £525.60 £525.60 Soldering Workbay
3D Printer Equipment Main Room T&E A reliable & accurate 3D printer Costing needed £0.00 £0.00 ????
Filament Consumable Main Room T&E Printer Filament 4 Rolls of filament (for Turnigy or Velleman) £20.95 £83.80 https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp
Main Room T&E Subtotal: £subtotal
Air filtration unit Fitting Maintenance and Improvement Air / dust filtration for the workshop This can happily sit on the winch girder £394.04 £394.04 http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481
Oven/Gas Fitting Fitting Maintenance and Improvement An oven for the kitchen. Or we could install it in the toilet. Either way it's an oven. See section below. £0 £0 Oven specifics
Maintenance and Improvement Subtotal: £subtotal Recent total: £937.70
Laser Materials Consumables Essential Materials Laser food Everything that the Laser eats. Notably no plywood currently - nor larger ply or MDF for Helios. £128.60 £128.60 See breakdown below Details
Shrapnel kits Consumables Essential Materials Kits of bits Nuts, bolts, screws, nails. Useful stuff that we usually mug Steve for. Using previous costing but we can use it for comparable other materials. Eg packets of the more commonly used screws, nails, bolts, etc., the previously bought bitkits then serve to fill irregular needs. £59.96 £59.96 See breakdown below Details
Component kits Consumables Essential Materials Components Misc assorted components which we mostly lack, at least that we can find. £19.62 £19.62 See breakdown below Details
Essential Materials Subtotal: £subtotal
Total £tree.fiddy

Details and Rationale

Soldering Station

Specific bay loadout as previously specified. Each bay contains:

Item Type Budget Category Description Rationale / Notes Price Cost URL
Soldering Station Tool Main Room T&E Steve’s Kitlist Atten ST-60 Premium Intelligent Soldering Station 60W £82.15 £82.15 https://www.rapidonline.com/85-6924
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-0.8 900M Series Soldering Tip Chisel 0.8mm £2.99 £2.99 https://www.rapidonline.com/85-6942
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-2.4 900M Series Soldering Tip Chisel 2.4mm £2.99 £2.99 https://www.rapidonline.com/85-6938
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-2C 900M Series Soldering Tip Sloped 2mm £2.99 £2.99 https://www.rapidonline.com/85-6944
Tip Cleaner Tool Main Room T&E Steve’s Kitlist Xytronic 460 Brass Wool Solder Tip Cleaner £4.77 £4.77 https://www.rapidonline.com/85-0626
Tip Cleaner Refill Consumable Main Room T&E Steve’s Kitlist Xytronic 459 Brass Wool Solder Tip Cleaner Refill £1.67 £1.67 https://www.rapidonline.com/85-0628
Solder Consumable Main Room T&E Steve’s Kitlist Rapid Solder Wire 60/40 22SWG 0.7mm 100g Reel £4.67 £4.67 https://www.rapidonline.com/85-0592
Solder Consumable Main Room T&E Steve’s Kitlist Rapid Lead-Free Solder Wire 22SWG 0.7mm 100g Reel £5.09 £5.09 https://www.rapidonline.com/85-1166
Pliers Tool Main Room T&E Steve’s Kitlist CK Tools T3889 Ecotronic ESD Long Snipe Nose Pliers £9.99 £9.99 https://www.rapidonline.com/93-3421
Cutters Tool Main Room T&E Steve’s Kitlist CK Tools T3887 Ecotronic ESD Side Cutters £10.40 £10.40 https://www.rapidonline.com/93-3419
Lamp Tool Main Room T&E Steve’s Kitlist Xytronic JF-33CB Superior Illuminated Lamp £69.33 £69.33 https://www.rapidonline.com/86-3333
Power Supply Tool Main Room T&E Steve’s Kitlist Uni-T UTP3705S 0-32V 5A DC Power Supply 2 Channel £178.94 £178.94 https://www.rapidonline.com/85-4048
Multimeter Tool Main Room T&E Steve’s Kitlist Uni-T Intelligent Digital Multimeters UT71B £118.73 £118.73 https://www.rapidonline.com/85-4065
Screwdriver Set Tool Main Room T&E Steve’s Kitlist Wera 05030170001 1578A/6 6-Piece ESD Kraftform Micro Screwdriver Set £20.06 £20.06 https://www.rapidonline.com/54-7139
Ruler Tool Main Room T&E Steve’s Kitlist CK Tools T3530 12 Steel Rule 300mm/12" £6.23 £6.23 https://www.rapidonline.com/86-1480
Stabby Thing Tool Main Room T&E Steve’s Kitlist Stanley 0-10-150 SM9 Snap Off Blade Knife 9mm £1.82 £1.82 https://www.rapidonline.com/86-0054
Refill for Stabby Thing Consumable Main Room T&E Steve’s Kitlist Stanley 0-11-300 Snap Off Replacement Blades 9mm - Pack Of 10 £2.78 £2.78 https://www.rapidonline.com/86-0055


Total cost: £525.60

Materials / Consumables.

- Filament;  Assuming 4 reels of https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp or similar colours until someone weighs in. 1.75 and 2.85 are the same price (£20.95). Also free sample filaments per reel. 

- Shrapnel kits (Total £59.96);
  https://www.screwfix.com/p/easyfix-round-oval-bright-nails-assorted-pack-x-4kg-pack/14989 £15.99 Nails. Lots.
  https://www.screwfix.com/p/silverscrew-pz-double-countersunk-woodscrews-grab-pack-1000-pcs/67663 £11.99 1000 screws
  https://www.screwfix.com/p/easyfix-bright-zinc-plated-mixed-machine-screws-750-piece-set/8386k £14.99 Machine screws
  https://www.screwfix.com/p/easyfix-bright-zinc-plated-mixed-bolts-nuts-washers-pack-500-piece-set/2526k £16.99 Nuts, bolts, washers

- Component kits (Total: £19.62); (Resistors and LEDs we're bloody swimming in.)
  https://www.ebay.co.uk/itm/100x-10-value-Variable-Resistors-Potentiometer-Assortment-Kit-Box-500ohm-Pop/302541252030 £2.98
  https://www.ebay.co.uk/itm/Top-BC337-BC547-10Values-x20-200pcs-NPN-PNP-Power-Transistor-Assortment-Kit-Box/172972931649 £2.27
  https://www.ebay.co.uk/itm/Lot-of-1000Pcs-Set-Kits-50values-50V-Ceramic-Capacitor-Assorted-Kit-Assortment/172645382890 ? £3.38
  https://www.ebay.co.uk/itm/125Pcs-1uF-electrolytic-capacitors-2200uF-25-Values-assorted-assortment-Kit-Set/282168307920 £3.00
  https://www.ebay.co.uk/itm/300-Pieces-Assortment-Set-2V-39V-30-Values-1-2W-0-5W-Zener-Diode-Assorted-Kit/381536097272 £2.57
  https://www.ebay.co.uk/itm/140pcs-14Types-Momentary-Tact-Tactile-Push-Button-Switch-SMD-Dip-Pushbutton-Set/263407888406 £2.55
  https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139 £1.18 !
  https://www.ebay.co.uk/itm/20PCS-IC-LM386N-LM386-AMP-AUDIO-PWR-MONO-8DIP-NEW-/191770597900 £0.99

- Laser ply, mdf, acrylic and friends. Laser ply still needs adding here (Total: £128.60)
  https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80 
  https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00
  https://www.kitronik.co.uk/3226-3mm-laser-compatible-medite-mdf-600mm-x-300mm-sheet.html x20 £18.00
  https://www.kitronik.co.uk/4720-clear-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90
  https://www.kitronik.co.uk/4705-black-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90

- Wood dyes, paints? Steve said some were missing - if I know which we can replace them? Spray paint is always useful eventually. A good ebony dye would be very nice.

- Lumber; any specifics? Plywood, CLS, pine planks ?

- Kitchen etc
  - cleaning materials
  - teabags / coffee
  - blueroll

- Catering expenses for volunteer workers is allowable in some grants. Point to consider for working party days.


To research / add:

Passive air filtration. Bloody useful and it could be considered under a few grant budget headings as accountancy requires. http://www.axminster.co.uk/jet-afs-500-air-filtration-system-310483 £304.25 - or one twice as effective for £90 more - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 £394.04 Other options are certainly available. Filters and mounting gubbins will also be needed for whichever is chosen.

A sewing machine. My efforts to rescue a normal one have yet been fruitless.

Screen printing equipment has been suggested. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably subject expertise could research this I'd appreciate it, I'm oversaturated with research as it is and it's not one of the areas I've worked with (unbelievable but true).

A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.

Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.

The grinder is currently pretty useless. We could expand it with a range of wheels to allow cleaning, abrading, sharpening and polishing - we also need to fit a guard and mount the thing though, it likes to go for a walk and spit firey sparks about the place. https://www.machinemart.co.uk/c/grinding--polishing-wheels/?p=1&c=30&s=pricelowhigh

Resin paraphernalia. Aside from a load of pots and mixers, we'd need scales, gloves, and sheet foam to make the moulds from. Long-term consumables here are things like dyes, mould release agents, of which only a small amount is used per cast. Also plaster of paris and a ton of bandages / rags / paper would be a sensible stock item. They're cheap and used for exomoulds and mean much less resin actually needs to be used per item. We would also need expendable paintbrushes here too.

Building infrastructure

Artist's impression of proposed shelving. Rumours of a magic carpet launch silo are entirely unsubstantiated.

The Under Rafter shelves

 Ply, assume  18x1220x2440mm 5 * £34.99 ; £174.93 (a lot of flat surface to cover here)
 CLS, 3 * £2.50 ; £7.50
 Casters, assume 8 bays * £4.29 pack 4 casters ; £34.32
 Screws, 500 * 1; £4.99

£221.74

CLS: 45cm * 7 * 2; 6.3m / 2.4m = 3 beams; £7.50. If we need support under, 2 * 5.6 = 11.2 / 2.4m = 5 beams; +£12.50

Plywood: 80cm * 120cm * 6 = 2 sheets, 5.6m * 80cm = +3 sheets. Technically can do 2 sheets but the joints would be everywhere.

It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though. Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.


An oven

I'm going to say £150 as a working figure; feel free to be more specific.

We're in need a gas plumbing quote. Am happy to babysit engineers if/when they need to inspect the place.

Main Room Additions

  • Sharpies.
  • More drawing equipment - I've equipped us with basic geometry and stationery, but curve rulers would be excellent.
  • Cutting mats
  • Metal rulers with nonslip backing
  • Actual scalpels, and a more rugged general craft knife

Craft 'starter kits'

To expand options. Note that many of these tools are cross purpose.

  • Leatherwork
  • Wirework
  • Sculpting/waxwork
  • Casting
  • Papercraft
  • Painting/finishing. Brushes, pallets and solvents etc.
  • Fabric/textiles.

Workshop Equipment

Hand tools

Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available. 

 Wilko Combination Square 305mm * 2 £12.00
 Wilko Centre Punch 2pieces £2.75
 Wilko Bradawl 140mm £1.50
 Wilko Nail Punch 2pieces £3.00
 Wilko Gimlet 8mm £2.25
 Stanley Plier Set 3 Piece £15.00
 Wilko Combination Spanner Set 6piece £8.00
 Wilko Locking Wrench Drop Forged 254mm £5.00
 Wilko Professional Hacksaw 12in £8.75
 Wilko Coping Saw Blades 5 Assorted £6.00
 Wilko Screw Puller 6 x 100mm £2.00
 Wilko Hand Saw Soft Grip Handle 550mm £7.00
 Wilko Junior Hacksaw 6in £3.50
 Wilko Tenon Saw Soft Grip Handle 250mm £5.00
 Wilko Double Drive Screwdriver Set 49 Piece £20.00
 Wilko Allen Key 14pieces £4.00
 Wilko Pin Hammer 4oz £5.25
 Wilko Ball Pein Hammer 8oz £7.00
 Wilko Claw Hammer Fibreglass 16oz £6.50
 Wilko Carpenters Pincers Drop Forged 6in £4.00
 Wilko Wood Chisel Set £6.00
 Wilko Straight Cut Aviation Snips 10in £5.50
 Tri mitre square £4.50
 Wilko Interior Mallet 16oz £4.50
 Wilko Sledge Hammer 3Lb £12.00
 Wilko Wooden Mallet 4in £4.25

Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a semi-organised heap on the floor.

Current total £165.25.

I'd suggest that we keep the current toolbags around for now, but that any tools used from them are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.

Other useful related things:

Current total £24.21

Retrieved from "https://home.ipswichmakerspace.com/mediawiki/index.php?title=Current_wishlist&oldid=872"