Difference between revisions of "Current wishlist"

From ipswichmakerspace
Jump to: navigation, search
m (→‎Materials / Consumables.)
m
 
(65 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
−
This page is a hybrid of the old Council Grant page, which was mainly core items for about £2k, and the current/Lottery Grant wishlist, which is more optimistic and includes infrastructure. Once Things have Settled, the Wishlist can then be reconfigured, taking any recent developments into account.
 
−
 
−
===Notes:===
 
 
====Page Intent====
 
====Page Intent====
 
''(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)''
 
''(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)''
Line 8: Line 5:
 
Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.  The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!
 
Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment.  The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!
  
−
====Awaiting input====
 
−
David has promised a resin kitlist. He's also suggested a casting workshop at some point this year. Some discussion is needed as to what balance of materials we should get there. Some expire over time, but are cheaper bought in bulk. My leading suggestions are either that we buy perishables from David as needed, or if demand allows us to buy in  bulk, sell him anything that's likely to expire soon so he can use it before it does.
 
−
 
−
====Workshop materials====
 
−
As in materials for ''running'' workshops, to get people interested. Ideas have so far included ''laser box making'', ''silver jewellery casting'', and ''resin casting'' (David).
 
−
 
−
First priority is working out what workshops we wish to run. Second is if we want to bother explicitly costing them, or just fund them from the float & repay that from the day's fees. We do however need enough stock material and equipment on hand for the process.
 
−
 
−
Resin requires little more than we currently have, other than the resin itself, and PPC, eg nitrile gloves & more labcoats.  Laser boxes require absolutely nothing new - hopefully this can be a regular workshop if it goes well.
 
−
 
−
Silver casting; gas, a blowtorch, a crucible, and an old saucepan full of sand are all we need. There are a few other cheap bits but no need listing them.
 
  
 
===The Wishlist Proper===
 
===The Wishlist Proper===
Line 25: Line 11:
  
 
Options:
 
Options:
−
   Workshop T&E (Currently: PPE, additional tools/measures, and starting on replacement hand tools.)
+
   Workshop T&E (Currently: PPE, additional tools/measures.)
 
   Workshop Machinery (Currently: bobbin sander. Planer/thicknesser, bandsaw need costing. Potentially radial arm drill also, price depending.)
 
   Workshop Machinery (Currently: bobbin sander. Planer/thicknesser, bandsaw need costing. Potentially radial arm drill also, price depending.)
−
   Main Room T&E (Includes another god-tier soldering bay, CR10S and some filament)
+
  Workshop T&E Other (Stuff we borrow that we should probably own, eg replacement hand tools)
 +
   Main Room T&E (Includes another god-tier soldering bay, CR10S, bench PSU and the laser airflow modification)
 
   Maintenance and Improvement (Currently gas fitting, which needs costing. Air filter and the workshop shelves would be good to have too)
 
   Maintenance and Improvement (Currently gas fitting, which needs costing. Air filter and the workshop shelves would be good to have too)
 
   Essential Materials (wood, filament, resin, screws, glue, solder, etc.)
 
   Essential Materials (wood, filament, resin, screws, glue, solder, etc.)
Line 34: Line 21:
  
 
'''Please do not change table structure'''. Javascript automatically updates '£subtotal' fields based on cell position/indexes.
 
'''Please do not change table structure'''. Javascript automatically updates '£subtotal' fields based on cell position/indexes.
−
 
−
====Specific input needed:====
 
−
 
−
'''Lathe tools'''. At the least, a roughing gouge of our own would be prudent.
 
−
Some existing long-term loan tools need TLC. The table saw needs a new blade, Jon had to buy a new chop saw fence recently, and the belt sander needs a new belt. The bandsaw needs shooting.
 
−
Interlinked smoke detectors. Jimbo had some suggestions there.
 
−
Crimper. Our current one is useless, someone suggest a known good brand please.
 
−
Woodstock, paints and finishes. Any more needed?
 
−
 
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 54: Line 32:
 
! scope="col"| Cost
 
! scope="col"| Cost
 
! scope="col"| URL
 
! scope="col"| URL
−
|-
 
−
 
−
 
−
 
−
! scope="row"| Angle gauge / inclinometer
 
−
| Measuring
 
−
| Workshop T&E
 
−
| Calipers for angles.
 
−
| Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved.
 
−
| £16.59
 
−
| £16.59
 
−
| https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge
 
 
|-
 
|-
  
Line 78: Line 44:
 
| https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge
 
| https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge
 
|-
 
|-
−
 
−
 
  
  
Line 86: Line 50:
 
| Workshop T&E
 
| Workshop T&E
 
| Detailed chisels for more than just straightforward wood removal
 
| Detailed chisels for more than just straightforward wood removal
−
| For hand carving, lathe work, and detailing. Better quality tools are certainly available, but price escalates quickly.
+
| For hand carving and detailing. Better quality tools are certainly available, but price escalates quickly. A set has been promised to us.
 
| £21.99
 
| £21.99
 
| £21.99
 
| £21.99
 
| https://www.ebay.co.uk/itm/VonHaus-12pc-Chisel-Set-Precision-Wood-Carving-Sharpening-Stone-Storage-Pouch/272756351795
 
| https://www.ebay.co.uk/itm/VonHaus-12pc-Chisel-Set-Precision-Wood-Carving-Sharpening-Stone-Storage-Pouch/272756351795
−
|-
 
−
 
−
! scope="row"| Face shield
 
−
| Utility, PPE
 
−
| Workshop T&E
 
−
| For use when lathing, grinding etc. X2
 
−
| The goggles, they do nothing!
 
−
| £6.99
 
−
| £13.98
 
−
| https://www.screwfix.com/p/face-shield-clear/6540d
 
 
|-
 
|-
  
Line 113: Line 67:
 
|-
 
|-
  
−
 
−
 
−
! scope="row"| Disposable Gloves
 
−
| Utility, PPE
 
−
| Workshop T&E
 
−
| 100 pack of disposable nitrile Gloves
 
−
| These also have the benefit of not reacting adversely with resin components
 
−
| £4.99
 
−
| £4.99
 
−
| https://www.screwfix.com/p/wallace-cameron-nitrile-powder-free-disposable-gloves-black-medium-100-pack/9515t
 
−
|-
 
  
  
Line 135: Line 78:
 
| Sources various depending on type. I have a contact who can embroider our logo on them if desired.
 
| Sources various depending on type. I have a contact who can embroider our logo on them if desired.
 
|-
 
|-
 +
  
 
! scope="row"| Magnet
 
! scope="row"| Magnet
Line 157: Line 101:
 
|-
 
|-
  
−
 
−
! scope="row"| Countersunk pilot drill bits
 
−
| Woodworking
 
−
| Workshop T&E
 
−
| Drill bits
 
−
| With countersinks. Attached! Saves so much time.
 
−
| £7.89
 
−
| £7.89
 
−
| https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/
 
−
|-
 
−
 
−
 
−
 
−
! scope="row"| Titanium step drills
 
−
| Tool
 
−
| Workshop T&E
 
−
| Drill bits with multiple steps for incrementally larger holes.
 
−
| Useful for basically any material, and by nature will also deburr the holes. [* One is available]
 
−
| £8.99
 
−
| £8.99
 
−
| https://www.amazon.co.uk/Zacro-Titanium-Drill-Automatic-Center/dp/B01J590QVE/
 
−
|-
 
−
 
−
 
−
! scope="row"| Coping / fret saw
 
−
| Tool
 
−
| Workshop T&E
 
−
| Deep throated saw for fiddly cutting tasks
 
−
| Currently we have no detail work saw aside from the jewellers saw, which is too detailed! *
 
−
| £10/15ish
 
−
| £12.50
 
−
| Eg: https://www.screwfix.com/p/bahco-301-ph-coping-saw/4659d or https://www.screwfix.com/p/bahco-fret-saw-5-130mm/5581k
 
−
|-
 
−
 
−
 
−
 
−
! scope="row"| Digital Calipers
 
−
| Measuring
 
−
| Workshop T&E
 
−
| Calipers
 
−
| The duels for the only metal set are getting out of hand.
 
−
| £9.90
 
−
| £9.90
 
−
| https://www.ebay.co.uk/itm/Digital-Vernier-Caliper-Stainless-Steel-Gauge-LCD-Measuring-Tool-Caliper-Gauge/152611671649
 
−
|-
 
−
 
−
! scope="row"| Metal Detector
 
−
| Utility
 
−
| Workshop T&E
 
−
| Hand-held metal detector
 
−
| For scanning for nails in recovered timber / anything going near the thicknesser.
 
−
| £7.89
 
−
| £7.89
 
−
| http://www.ebay.co.uk/itm/New-Portable-Hand-Held-Metal-Security-Detector-Super-Scanner-Meter-OL2-/172959417810
 
−
|-
 
−
 
−
! scope="row"| Riveter
 
−
| Tool
 
−
| Workshop T&E
 
−
| Hand-held riveter
 
−
| Also comes with variously sized rivets.
 
−
| £19.84
 
−
| £19.84
 
−
| https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786
 
−
|-
 
  
 
! scope="row"| Angle Grinder Stand
 
! scope="row"| Angle Grinder Stand
Line 245: Line 124:
  
  
−
! scope="row"| Replacement hand tools
+
 
−
| Tools
+
 
−
| Workshop T&E
+
−
| Replacement hand tools
+
−
| Close estimate for mostly costed hand tool list + a few measurement tools.
+
−
| £189.46
+
−
| £189.46
+
−
| [[#Hand_tools|hand tools]]
+
−
|-
+
  
  
Line 266: Line 138:
 
|-
 
|-
  
−
 
+
−
 
+
−
 
+
−
! scope="row"| Bobbin Sander
+
−
| Machine
+
−
| Workshop T&E Machinery
+
−
| A bobbin sander
+
−
| Sands curves and other odd shapes.
+
−
| £199.99
+
−
| £199.99
+
−
| https://www.screwfix.com/p/triton-tsps450-450w-oscillating-spindle-sander-240v/1417k
+
−
|-
+
−
 
+
−
 
+
−
! scope="row"| Bandsaw
+
−
| Tool
+
−
| Workshop T&E Machinery
+
−
| Beefy bandsaw
+
−
| The Makita is no long available. I will be making contact with Axminster again and seeing what might be available at cheaper than usual prices.
+
−
| £0.00
+
−
| £0.00
+
−
| ????
+
−
|-
+
  
 
! scope="row"| Radial Drill
 
! scope="row"| Radial Drill
Line 295: Line 145:
 
| Extendable powerful drill
 
| Extendable powerful drill
 
| Deeper throat and greater depth. Also means the current drill can be dedicated for a given purpose eg lowspeed metalwork.
 
| Deeper throat and greater depth. Also means the current drill can be dedicated for a given purpose eg lowspeed metalwork.
−
| £326.00
+
| £319.96
−
| £326.00
+
| £319.96
−
| https://www.axminster.co.uk/axminster-hobby-series-ahrd16b-bench-radial-drill-101928
+
| https://www.axminster.co.uk/axminster-craft-ac680rd-floor-radial-drill-105112
 
|-
 
|-
  
  
−
! scope="row"| Planer / Thicknesser
+
 
−
| Workshop Machine
+
 
−
| Workshop T&E Machinery
+
! scope="row"| Air filter
−
| Machine for turning rough stock into joinable uniform planks
+
| Utility
−
| With a supply of pallets, this will provide us with as much lumber as we need for most purposes. Which machine is the best choice really depends how much budget we can throw at it... there are options either side, but cheaper you have very mixed reviews, or lose the planer / jointer capabilities. With this one we will need to buy or make a stand/trolley as well.
+
| Workshop T&E
−
| £346
+
| Dust / air filter
−
| £346
+
| Will need fittings/filters too.
−
| https://www.machinemart.co.uk/p/clarke-cpt1000-254mm-10-planer-thicknesser/
+
| £394.04
 +
| £394.04
 +
| http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481
 
|-
 
|-
 +
 +
  
 
! scope="row"| Workshop T&E Machinery
 
! scope="row"| Workshop T&E Machinery
Line 323: Line 177:
  
  
 +
! scope="row"| Angle gauge / inclinometer
 +
| Measuring
 +
| Workshop T&E Other
 +
| Calipers for angles.
 +
| Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved.
 +
| £16.59
 +
| £16.59
 +
| https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge
 +
|-
  
 +
 +
! scope="row"| Countersunk pilot drill bits
 +
| Woodworking
 +
| Workshop T&E Other
 +
| Drill bits
 +
| With countersinks. Attached! Saves so much time.
 +
| £7.89
 +
| £7.89
 +
| https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/
 +
|-
 +
 +
 +
! scope="row"| Riveter
 +
| Tool
 +
| Workshop T&E
 +
| Hand-held riveter
 +
| Also comes with variously sized rivets.
 +
| £19.84
 +
| £19.84
 +
| https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786
 +
|-
  
  
 
! scope="row"| Engineers Calipers
 
! scope="row"| Engineers Calipers
 
| Measuring
 
| Measuring
−
| Woodworking T&E Other
+
| Workshop T&E Other
 
| High calibre calipers.
 
| High calibre calipers.
−
| Useful for many tasks involving measurement, especially try-test work - in particular the earwigs are invaluable for hollow objects & lathed bowls. *
+
| Useful for many tasks involving measurement, especially try-test work - in particular the earwigs are invaluable for hollow objects & lathed bowls.
 
| £14.39
 
| £14.39
 
| £14.39
 
| £14.39
 
| https://www.machinemart.co.uk/p/et153-3-piece-spring-caliper-set/
 
| https://www.machinemart.co.uk/p/et153-3-piece-spring-caliper-set/
−
|-
 
−
 
−
 
−
! scope="row"| Bolt Cutters
 
−
| Tool
 
−
| Woodworking T&E Other
 
−
| Cutters for bolts and similar devices
 
−
| We lack anything more than tinsnips. *
 
−
| £12.99
 
−
| £12.99
 
−
| https://www.screwfix.com/p/forge-steel-bolt-cutters-30/3489c
 
 
|-
 
|-
  
Line 350: Line 223:
 
! scope="row"| Bench vice
 
! scope="row"| Bench vice
 
| Utility
 
| Utility
−
| Woodworking T&E Other
+
| Workshop T&E Other
 
| Mountable vice and small anvil for metalwork & friends
 
| Mountable vice and small anvil for metalwork & friends
 
| For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version]
 
| For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version]
Line 360: Line 233:
 
! scope="row"| Rasp and file set
 
! scope="row"| Rasp and file set
 
| Tool
 
| Tool
−
| Woodworking T&E Other
+
| Workshop T&E Other
 
| For subtractive handwork, especially on woods and metals
 
| For subtractive handwork, especially on woods and metals
−
| Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. *
+
| Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set.
 
| £20-60
 
| £20-60
 
| £40
 
| £40
Line 372: Line 245:
 
! scope="row"| Tap and die set
 
! scope="row"| Tap and die set
 
| Tool
 
| Tool
−
| Woodworking T&E Other
+
| Workshop T&E Other
 
| For making threaded holes and threaded things what goes in those holes
 
| For making threaded holes and threaded things what goes in those holes
 
| Prices vary wildly depending where you ask versus what quality. [ * midrange set ]
 
| Prices vary wildly depending where you ask versus what quality. [ * midrange set ]
Line 382: Line 255:
  
  
−
! scope="row"| Woodworking T&E Other
+
! scope="row"| Workshop T&E Other
 
|
 
|
 
|  
 
|  
 
|  
 
|  
−
|
+
| These items are currently available, but only as they've been loaned.
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
Line 398: Line 271:
 
|Equipment
 
|Equipment
 
|Main Room T&E
 
|Main Room T&E
−
|A reliable & accurate 3D printer
+
|Creality 10S
−
|CR10S is probably the optimal choice. A CR10 alone is about £50 cheaper.
+
|For capacity
 
|£379.88
 
|£379.88
 
|£379.88
 
|£379.88
Line 405: Line 278:
 
|-
 
|-
  
 +
 +
! scope="row"|3D Printer
 +
|Equipment
 +
|Main Room T&E
 +
|Ender 3
 +
|For output bandwidth
 +
|£196.96
 +
|£196.96
 +
|https://www.amazon.co.uk/Comgrow-Creality-Ender-Printer-Aluminum/dp/B07BR3F9N6
 +
|-
  
  
−
! scope="row"| Soldering Station
+
! scope="row"|3D Printer
−
|Tool
+
|Equipment
 
|Main Room T&E
 
|Main Room T&E
−
|Steve’s Kitlist
+
|Prusa I3
−
|Soldering workbay
+
|For output bandwidth & later MMU attachment
−
|£525.60
+
|£186
−
|£525.60
+
|£186
−
|[[#Soldering_Workbay|Soldering Workbay]]
+
|https://www.amazon.co.uk/GEEETECH-Printer-Aluminum-Assembled-220×220×260mm/dp/B07F42RRDN/
 
|-
 
|-
  
  
  
−
 
+
! scope="row"|Laminator
−
! scope="row"|''Filament''
+
|Equipment
−
|Consumable
+
 
|Main Room T&E
 
|Main Room T&E
−
|Printer Filament
+
|For handouts, notices etc
−
|4 Rolls of filament (for Turnigy or Velleman)
+
|A4 and A3. A3 pouches [https://www.staples.co.uk/laminating-pouches-a3/cbs/297645936.html here], A4 [https://www.staples.co.uk/laminating-pouches/cbs/297826372.html here]
−
|£20.95
+
|£53.99
−
|£83.80
+
|£53.99
−
|https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp
+
|https://www.staples.co.uk/laminating-machines/cbs/297790298.html
 
|-
 
|-
  
Line 444: Line 326:
  
  
−
 
+
! scope="row"| Under Rafter Shelves
−
! scope="row"| Oven/Gas Fitting
+
 
| Fitting
 
| Fitting
 
| Maintenance and Improvement
 
| Maintenance and Improvement
−
| An oven for the kitchen. Or we could install it in the toilet. Either way it's an oven.
+
| Shelves & trays for the store room dead space.
 
| See section below.
 
| See section below.
−
| £0
+
| £263.49
−
| £0
+
| £263.49
−
| [[#An_oven|Oven specifics]]
+
| [[#The_Under_Rafter_shelves|Details and plans]]
 
|-
 
|-
 +
 +
  
  
Line 463: Line 346:
 
| '''Subtotal:'''
 
| '''Subtotal:'''
 
| '''£subtotal'''
 
| '''£subtotal'''
−
| Recent total: £937.70
+
|  
 
|-
 
|-
  
  
−
! scope="row"| Shrapnel kits
+
! scope="row"| Non-core component kits
 
| Consumables
 
| Consumables
 
| Essential Materials
 
| Essential Materials
−
| Kits of bits
+
| Other related components
−
| Nuts, bolts, screws, nails. Useful stuff that we usually mug Steve for. Using previous costing '''but''' we can use it for comparable other materials. Eg packets of the more commonly used screws, nails, bolts, etc., the previously bought bitkits then serve to fill irregular needs.
+
| Crimps, heatshrink, PCB blanks, jumpers & sockets, voltage regulators, etc
−
| £59.96
+
| £51.36
−
| £59.96
+
| £51.36
 
| See breakdown below [[#Materials_.2F_Consumables.|Details]]
 
| See breakdown below [[#Materials_.2F_Consumables.|Details]]
 
|-
 
|-
  
−
! scope="row"| Component kits
+
 
 +
! scope="row"| Useful IC chips
 
| Consumables
 
| Consumables
 
| Essential Materials
 
| Essential Materials
−
| Components
+
| IC chips and sockets.
−
| Misc assorted components which we mostly lack.
+
| Counters, logic, flipflops, opamps, etc.
−
| £45.06
+
| £17.58
−
| £45.06
+
| £17.58
 
| See breakdown below [[#Materials_.2F_Consumables.|Details]]
 
| See breakdown below [[#Materials_.2F_Consumables.|Details]]
 
|-
 
|-
  
  
−
! scope="row"| Non-core component kits
+
! scope="row"| Resin & Friends
 
| Consumables
 
| Consumables
 
| Essential Materials
 
| Essential Materials
−
| Other related components
+
| Resin casting equipment and essential materials
−
| Crimps, heatshrink, PCB blanks, jumpers & sockets, voltage regulators, etc
+
| After some liaising with David, this covers everything we need for holding casting workshops.
−
| £51.36
+
| £271.00
−
| £51.36
+
| £271.00
−
| See breakdown below [[#Materials_.2F_Consumables.|Details]]
+
| Various suppliers
 
|-
 
|-
 +
 +
  
  
Line 517: Line 403:
 
|}
 
|}
  
 +
 +
 +
''Note that the resin materials will pay for themselves, the workshops will charge enough to cover the usage, and over time will net more paying members.''
 +
 +
''Workshop T&E Other'' are hand tools that we already have, but only due to loans. Ideally we need to start owning some of the core stuff outright.
 +
 +
Disregarding those two figures, the total drops by ''£632.60'' - currently to ''£2594.75''.
  
 
<!--
 
<!--
Line 538: Line 431:
 
===Soldering Workbay===
 
===Soldering Workbay===
  
−
Specific bay loadout as previously specified. Each bay contains:
+
Costing assumes that NO DISCOUNT is available from Rapid. Hopefully we can wrangle something. Specific bay loadout as previously used; each bay contains:
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 717: Line 610:
 
'''Total cost: £525.60'''
 
'''Total cost: £525.60'''
  
−
===Materials / Consumables.===
 
  
 +
===New Stuff===
 +
 +
Major purchases are hopefully eligible for match funding, probable candidates in itallics.
 +
 +
- '''Budget Metalworking / Welding''' ('''$blocktotal''');
 +
  ''http://amzn.eu/d/2NBAijT '''£229.08''' Tig/mma Air Plasma Cutter''
 +
  http://amzn.eu/d/f1pyRxV '''£17.54''' Welding Helmet Auto Darkening
 +
  http://amzn.eu/d/iyQ0F4m '''£4.16''' Welders Gauntlets
 +
  http://amzn.eu/d/04DCsd1 '''£15.70''' Welding Clamps
 +
  http://amzn.eu/d/gCLqVS3 '''£7.48''' Welding Magnets x4
 +
  http://amzn.eu/d/dX2qx56 '''£2.50''' Arc Welding Rods
 +
 +
- '''Ideal Metalworking / Welding''' ('''$blocktotal''');
 +
  ''https://www.r-techwelding.co.uk/tig-mma-welder-dc-pulse-200a-digital-110v-240v/ '''£549.00''' R-Tech TIG Welder DC Digital''
 +
  https://www.r-techwelding.co.uk/r-tech-speedmaster-xl-auto-welding-helmet/'''£54.95''' Welding Helmet
 +
  https://www.r-techwelding.co.uk/prestige-silver-leather-tig-welding-glove/'''£6.50''' Welding Gloves
 +
  https://www.r-techwelding.co.uk/1kg-4043a-grade-aluminium-1-6mm-tig-filler-rods/ '''£10.95''' Aluminium Tig Filler Rods
 +
  https://www.r-techwelding.co.uk/1kg-mild-steel-1-0mm-tig-filler-rod/ '''£14.90''' Steel TIG Filler Rods
 +
  A plasma cutter was mentioned - this would be godly, especially if we strap it to a CNC rig later.
 +
 +
- '''Metalworking Bench and tools''' ('''$blocktotal''');
 +
  https://www.machinemart.co.uk/p/cwb1500-engineers-bench/ '''£239.98''' Engineers Bench
 +
  https://www.machinemart.co.uk/p/cwb2000p-2m-production-bench/ '''£287.98''' 2m Production Bench
 +
  https://www.machinemart.co.uk/p/clarke-sbr305-3-in-1-universal-305mm-sheet-me/ '''£274.80''' 3 in 1 Sheet Metal Machine
 +
  https://www.machinemart.co.uk/p/clarke-ccb1b-compact-bench-mounted-parts-bende/ '''£95.98''' Bench Mounted Parts Bender
 +
  https://www.machinemart.co.uk/p/csvr100-100mm-steel-vice/ '''£26.39''' 100mm Steel Vice
 +
  https://www.machinemart.co.uk/p/cht128-11-pce-metal-file-set/ '''£14.39''' Metal File Set
 +
  https://www.machinemart.co.uk/p/clarke-ap500b-1-2-ton-arbor-press/ '''£38.39''' Arbor Press
 +
  https://www.machinemart.co.uk/p/5pc-cutting-tool-set-for-cl300m/ '''£19.19''' 5pc Lathe Tool Set
 +
  https://www.machinemart.co.uk/p/clarke-cht775-52-piece-metricunfbsp-tap-and/ '''£65.99''' Tap And Die Set
 +
  https://www.machinemart.co.uk/p/cbs45md-41-2in-x-6in-metal-cutting-ban/ '''£322.80''' Metal Cutting Bandsaw
 +
 +
- '''Blacksmithing''' (awaiting information on possible donations/loanations/purchase opportunities)
 +
  ''Anvil'', heavier the better - cheap Chinese have reputation of being made of cast iron, ie. non-heattreated and soft, don’t go that way. East-Europeans etc. are usually OK. The anvil needs a proper block under it, and ideally a horn. Railway track can be used to make smaller specific-purpose anvils.
 +
  Some anvil tools are needed, cutting wedge and iron plate for hot-cutting.
 +
  Hammers & tongs - more the merrier - and for once, here diversity is a good thing! Minimal core; 1kg, 1,5kg and a 2 kg straight peen blacksmiths hammers, a couple smaller ball peen hammers and some basic tongs should suffice for a start. Mole grips/clamps also handy.
 +
  Working tables, at least one with a metal surface. Need to think about weatherproofing.
 +
  The actual forge. Probably gas powered tube-forge for efficiency, no reason we couldn't make another size later if needed.
 +
  A few vices are a must.
 +
  Some literature about the craft would come handy too
 +
  A power hammer would be amazing, and save us pissing the neighbours off.
 +
 +
- '''Sharable with the metalshop''':
 +
  Loads of hand tools, angle grinders of different sizes, files,  metal brushes, pliers, hack-saws, etc.
 +
  Protection stuff, goggles, respirators, earmuffs, maybe panzers or coveralls too.
 +
 +
- Misc art/craft kit
 +
  https://www.ebay.co.uk/itm/Mini-AirBrush-Compressor-0-4mm-Needle-Kit-for-Makeup-Cake-Nail-Art-Tattoo-Hobby/381480491595
 +
  https://www.ebay.co.uk/itm/62x-Silicone-Mould-Mold-for-DIY-Resin-Round-Necklace-jewelry-Pendant-Making-tool/202505196223
 +
  https://www.ebay.co.uk/itm/French-Curve-Ruler-Set-of-12-Rulers-Drawing-Template-Fashion-Sewing-Dressmaking/201737811334
 +
 +
- Infrastructure
 +
  CAT5 reel or two.
 +
 +
===Materials / Consumables.===
 +
<!--
 
  - Shrapnel kits Total ('''$blocktotal''');
 
  - Shrapnel kits Total ('''$blocktotal''');
 
   https://www.screwfix.com/p/easyfix-round-oval-bright-nails-assorted-pack-x-4kg-pack/14989 '''£15.99''' Nails. Lots.
 
   https://www.screwfix.com/p/easyfix-round-oval-bright-nails-assorted-pack-x-4kg-pack/14989 '''£15.99''' Nails. Lots.
Line 737: Line 685:
 
   600pcs NPN&PNP mixed kit '''£5.03''' https://www.banggood.com/600Pcs-TO-92-NPN-PNP-Bipolar-Transistor-15-Value-Assortment-Kit-p-1098096.html?rmmds=search
 
   600pcs NPN&PNP mixed kit '''£5.03''' https://www.banggood.com/600Pcs-TO-92-NPN-PNP-Bipolar-Transistor-15-Value-Assortment-Kit-p-1098096.html?rmmds=search
 
   50pcs Photoresistors '''£2.58''' https://www.ebay.co.uk/itm/50pcs-5-types-10pcs-Photoresistor-Kit-Dependent-Light-Resistor-LDR-PackCC/273292556330
 
   50pcs Photoresistors '''£2.58''' https://www.ebay.co.uk/itm/50pcs-5-types-10pcs-Photoresistor-Kit-Dependent-Light-Resistor-LDR-PackCC/273292556330
−
   120pcs Inductors https://www.banggood.com/14W-1UH-1MH-120pcs-12-Values-0307-Color-Ring-Inductor-Pack-Color-Code-Inductor-10pcs-Each-Value-p-1174702.html?rmmds=search&cur_warehouse=CN
+
   120pcs Inductors '''£2.20''' https://www.banggood.com/14W-1UH-1MH-120pcs-12-Values-0307-Color-Ring-Inductor-Pack-Color-Code-Inductor-10pcs-Each-Value-p-1174702.html?rmmds=search&cur_warehouse=CN
 
   100pcs 555 chips '''£1.18''' https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139
 
   100pcs 555 chips '''£1.18''' https://www.ebay.co.uk/itm/50PCS-NE555P-NE555-DIP-8-SINGLE-BIPOLAR-TIMERS-IC-factory-price/191736574139
−
 
+
-->
  
 
  - Non-core components and friends ('''$blocktotal''');
 
  - Non-core components and friends ('''$blocktotal''');
 +
  400 header pins '''£2.29''' https://www.ebay.co.uk/itm/10-x-40-Pin-Header-Pins-Strip-PCB-0-1-2-54mm-for-Arduino-Breadboard-UK-Seller/400858209683
 
   40pcs PCB Blanks '''£6.94''' https://www.banggood.com/40pcs-FR-4-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-995732.html?rmmds=detail-top-buytogether-auto__4&cur_warehouse=CN
 
   40pcs PCB Blanks '''£6.94''' https://www.banggood.com/40pcs-FR-4-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-995732.html?rmmds=detail-top-buytogether-auto__4&cur_warehouse=CN
 
   328pcs Heatshrink tubing '''£3.39''' https://www.banggood.com/Soloop-328pcs-21-Polyolefin-Halogen-Free-Heat-Shrink-Tube-Sleeving-5-Color-8-Size-p-969574.html?rmmds=detail-top-buytogether-auto__8&cur_warehouse=CN
 
   328pcs Heatshrink tubing '''£3.39''' https://www.banggood.com/Soloop-328pcs-21-Polyolefin-Halogen-Free-Heat-Shrink-Tube-Sleeving-5-Color-8-Size-p-969574.html?rmmds=detail-top-buytogether-auto__8&cur_warehouse=CN
Line 768: Line 717:
 
   £1.49 https://www.ebay.co.uk/itm/100PCS-8-Pin-DIP8-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/191738593245?hash=item2ca482bfdd:g:-BsAAOSwcdBWSEF8
 
   £1.49 https://www.ebay.co.uk/itm/100PCS-8-Pin-DIP8-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/191738593245?hash=item2ca482bfdd:g:-BsAAOSwcdBWSEF8
 
   £1.40 https://www.ebay.co.uk/itm/50PCS-16-Pin-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/141663389081
 
   £1.40 https://www.ebay.co.uk/itm/50PCS-16-Pin-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/141663389081
 +
  £2.54 https://www.ebay.co.uk/itm/5PCS-L293D-L293-Push-Pull-Four-Channel-Motor-Driver-IC-DIP-16-EC/192583520097
  
−
 
+
  - Still to cost: Workshop consumables
−
  - Workshop consumables
+
 
   Wood glue
 
   Wood glue
 
   Super glue
 
   Super glue
Line 776: Line 725:
 
   Sandpaper
 
   Sandpaper
 
   Sanding sponges; Festool ones seem good
 
   Sanding sponges; Festool ones seem good
 +
  WD40
 +
  3-in-1
  
 +
- Kitchen etc
 +
  - cleaning materials
 +
  - teabags / coffee
 +
  - blueroll
  
  
−
- Filament;  Assuming 4 reels of https://shop.3dfilaprint.com/filaprint-dark-blue-premium-pla-175mm-3d-printer-filament-1277-p.asp or similar colours until someone weighs in. 1.75 and 2.85 are the same price (£20.95). Also free sample filaments per reel.
 
  
−
- Laser ply, mdf, acrylic and friends. Laser ply still needs adding here ('''Total: $blocktotal''')
+
====Workshop materials====
−
  https://www.kitronik.co.uk/4710-fp-fluorescent-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £28.80
+
−
  https://www.kitronik.co.uk/4700-sp-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4-bulk-pack.html x2 £42.00
+
−
  https://www.kitronik.co.uk/3226-3mm-laser-compatible-medite-mdf-600mm-x-300mm-sheet.html x20 £18.00
+
−
  https://www.kitronik.co.uk/4720-clear-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90
+
−
  https://www.kitronik.co.uk/4705-black-opaque-perspex-sheet-3mm-x-297mm-x-210mm-a4.html x 10 £19.90
+
  
−
- Wood dyes, paints? Steve said some were missing - if I know which we can replace them? Spray paint is always useful eventually. A good ebony dye would be very nice.
+
As in materials for ''running'' workshops, to get people interested. Ideas have so far included ''laser box making'', ''silver jewellery casting'', and ''resin casting'' (David).
  
−
- Kitchen etc
+
First priority is working out what workshops we wish to run. Second is if we want to bother explicitly costing them, or just fund them from the float & repay that from the day's fees. We do however need enough stock material and equipment on hand for the process.
−
  - cleaning materials
+
−
  - teabags / coffee
+
−
  - blueroll
+
  
−
  - Catering expenses for volunteer workers is allowable in some grants. Point to consider for working party days.
+
Resin has been costed now. Laser boxes require absolutely nothing new - hopefully this can be a regular workshop if it goes well.
 +
 
 +
Silver casting; gas, a blowtorch, a crucible, and an old saucepan full of sand are all we need. There are a few other cheap bits but no need listing them.
  
 
==To research / add:==
 
==To research / add:==
  
−
Passive air filtration. Bloody useful and it could be considered under a few grant budget headings as accountancy requires. http://www.axminster.co.uk/jet-afs-500-air-filtration-system-310483 '''£304.25''' - or one twice as effective for £90 more - http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481 '''£394.04''' Other options are certainly available. Filters and mounting gubbins will also be needed for whichever is chosen.
 
  
−
A sewing machine. My efforts to rescue a normal one have yet been fruitless.
+
 
 +
'''Lathe tools'''. At the least, a roughing gouge of our own would be prudent.
 +
Some existing long-term loan tools need TLC. The table saw needs a new blade, Jon had to buy a new chop saw fence recently, and the belt sander needs a new belt. The bandsaw needs shooting.
 +
'''CAT5 too'''
 +
A3 laminator
 +
A3 printer
 +
kiln
 +
Forge construction materials
 +
Anvil
 +
Anvil tools
 +
Plasma cutter!
 +
 
  
 
Screen printing equipment has been suggested. Digital and/or oldschool? This is a beast I am unfamiliar with. '''Space is also a factor.''' A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably subject expertise could research this I'd appreciate it, I'm oversaturated with research as it is and it's not one of the areas I've worked with (unbelievable but true).
 
Screen printing equipment has been suggested. Digital and/or oldschool? This is a beast I am unfamiliar with. '''Space is also a factor.''' A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably subject expertise could research this I'd appreciate it, I'm oversaturated with research as it is and it's not one of the areas I've worked with (unbelievable but true).
Line 809: Line 767:
 
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.
 
Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.
  
−
The grinder is currently pretty useless. We could expand it with a range of wheels to allow cleaning, abrading, sharpening and polishing - we also need to fit a guard and mount the thing though, it likes to go for a walk and spit firey sparks about the place.
+
Resin paraphernalia.
−
https://www.machinemart.co.uk/c/grinding--polishing-wheels/?p=1&c=30&s=pricelowhigh
+
−
 
+
−
Resin paraphernalia. Aside from a load of pots and mixers, we'd need scales, gloves, and sheet foam to make the moulds from. Long-term consumables here are things like dyes, mould release agents, of which only a small amount is used per cast. Also plaster of paris and a ton of bandages / rags / paper would be a sensible stock item. They're cheap and used for exomoulds and mean much less resin actually needs to be used per item. We would also need expendable paintbrushes here too.
+
  
 
==Building infrastructure==
 
==Building infrastructure==
Line 831: Line 786:
  
 
It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though.  Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.
 
It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though.  Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.
−
 
−
===An oven===
 
−
I'm going to say '''£150''' as a working figure; feel free to be more specific.
 
−
 
−
We're in need of a gas plumbing quote. Am happy to babysit engineers if/when they need to inspect the place.
 
  
 
===Main Room Additions===
 
===Main Room Additions===
Line 858: Line 808:
 
===Workshop Equipment===
 
===Workshop Equipment===
  
−
====Hand tools====
+
====Toolstation/Screwfix versions of hand tool list (BOUGHT, reference only!)====
 +
Where possible. Wooden mallet & 'paint-tier' chisels unobtainable cheaply.
  
−
Initial faffing for a basic toolbox loadout. Currently exported from a Wilko basket; other vendors are available.
+
  [https://www.screwfix.com/p/forge-steel-hand-tool-kit-55-piece-set/7045g Small core tool set] £29.99
 +
  [https://www.toolstation.com/pin-hammer/p80643 Pin hammer] £2.75
 +
  [https://www.screwfix.com/p/magnusson-fibreglass-cross-pein-hammer-8oz/6843v Crosspein] £6.99
 +
  [https://www.screwfix.com/p/magnusson-fibreglass-ball-pein-hammer-16oz/2630v Ballpein] £7.99
 +
  [https://www.toolstation.com/ox-combination-rubber-mallet/p66531 Assembly mallet, with a nonmarking face] £8.89
 +
  [https://www.screwfix.com/p/irwin-jack-500-universal-saw-8tpi-22/69735 General saw] £7.99
 +
  [https://www.screwfix.com/p/magnusson-tenon-saw-14/4738v Tenon saw] £7.99
 +
  [https://www.screwfix.com/p/stanley-hacksaw-24tpi-12-300mm/5083f Hacksaw] £10.99
 +
  [https://www.screwfix.com/p/magnusson-hacksaw-blades-32tpi-12-5-pack/5846v Long hacksaw blades] £4.99
 +
  [https://www.screwfix.com/p/bahco-junior-hacksaw-blades-32tpi-6-10-pack/8553k Small hacksaw blades] £3.99
 +
  [https://www.screwfix.com/p/magnusson-pliers-set-3-pieces/8064v Pliers] £19.99
 +
  [https://www.screwfix.com/p/locking-pliers-set-3-pieces/4091v Mole grips] £8.99
 +
  [https://www.toolstation.com/pincers/p18477 Carpenter's pincers] £3.38
 +
  [https://www.screwfix.com/p/stanley-aviation-snips-10/8579x Snips] £17.99
 +
  [https://www.screwfix.com/p/magnusson-ratcheting-wire-strippers-8/5175v Heavy strippers] £12.99
 +
  [https://www.toolstation.com/combination-spanner-set/p75781 Full spanner set] £4.48
 +
  [https://www.screwfix.com/p/magnusson-long-arm-ball-end-metric-hex-key-set-9pcs/8113v workshop hex keys (Wilko have cheaper but not as nice)] £7.49
 +
  [https://www.screwfix.com/p/nail-punch-set-5-pieces/2624v nail punches] £4.99
 +
  [https://www.toolstation.com/centre-punch-set/p96658 centre punches] £5.15
 +
  [https://www.screwfix.com/p/roughneck-cold-chisel-guard-1-x-12/56313 cold chisel] £9.99
 +
  [https://www.toolstation.com/roughneck-gorilla-mini-sledge-hammer/p96092 Mini sledge] £21.76
 +
  [https://www.toolstation.com/prep-stainless-steel-wallpaper-scissors/p20953 Wallpaper scissors (for craft group)] £4.99
  
−
   [http://www.wilko.com/all-hand-tools/wilko-combination-square-305mm/invt/0209181 Wilko Combination Square 305mm] * 2 £12.00
+
   £214.75 total
−
  [http://www.wilko.com/all-hand-tools/wilko-centre-punch-2pieces/invt/0343918 Wilko Centre Punch 2pieces] £2.75
+
−
  [http://www.wilko.com/all-hand-tools/wilko-bradawl-140mm/invt/0209298 Wilko Bradawl 140mm] £1.50
+
−
  [http://www.wilko.com/all-hand-tools/wilko-nail-punch-2pieces/invt/0343920 Wilko Nail Punch 2pieces] £3.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-gimlet-8mm/invt/0209299 Wilko Gimlet 8mm] £2.25
+
−
  [http://www.wilko.com/diy-gifts/stanley-plier-set-3-piece/invt/0247713 Stanley Plier Set 3 Piece] £15.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-combination-spanner-set-6piece/invt/0343560 Wilko Combination Spanner Set 6piece] £8.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-locking-wrench-drop-forged-254mm/invt/0209119 Wilko Locking Wrench Drop Forged 254mm] £5.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-professional-hacksaw-12in/invt/0344220 Wilko Professional Hacksaw 12in] £8.75
+
−
  [http://www.wilko.com/all-hand-tools/wilko-coping-saw-blades-5-assorted/invt/0344229 Wilko Coping Saw Blades 5 Assorted] £6.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-screw-puller-6-x-100mm/invt/0286615 Wilko Screw Puller 6 x 100mm] £2.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-hand-saw-soft-grip-handle-550mm/invt/0344239 Wilko Hand Saw Soft Grip Handle 550mm] £7.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-junior-hacksaw-6in/invt/0344216 Wilko Junior Hacksaw 6in] £3.50
+
−
  [http://www.wilko.com/all-hand-tools/wilko-tenon-saw-soft-grip-handle-250mm/invt/0344236 Wilko Tenon Saw Soft Grip Handle 250mm] £5.00
+
−
  [http://www.wilko.com/screwdrivers+allen-keys/wilko-double-drive-screwdriver-set-49-piece/invt/0427226 Wilko Double Drive Screwdriver Set 49 Piece] £20.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-allen-key-14pieces/invt/0343368 Wilko Allen Key 14pieces] £4.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-pin-hammer-4oz/invt/0209173 Wilko Pin Hammer 4oz] £5.25
+
−
  [http://www.wilko.com/all-hand-tools/wilko-ball-pein-hammer-8oz/invt/0209093 Wilko Ball Pein Hammer 8oz] £7.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-claw-hammer-fibreglass-16oz/invt/0460360 Wilko Claw Hammer Fibreglass 16oz] £6.50
+
−
  [http://www.wilko.com/all-hand-tools/wilko-carpenters-pincers-drop-forged-6in/invt/0209122 Wilko Carpenters Pincers Drop Forged 6in] £4.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-wood-chisel-set/invt/0343911 Wilko Wood Chisel Set] £6.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-straight-cut-aviation-snips-10in/invt/0209105 Wilko Straight Cut Aviation Snips 10in] £5.50
+
−
  [http://www.wilko.com/all-hand-tools/wilko-tri-and-mitre-square-100-and-200mm/invt/0209549 Tri mitre square] £4.50
+
−
  [http://www.wilko.com/all-hand-tools/wilko-interior-mallet-16oz/invt/0343403 Wilko Interior Mallet 16oz] £4.50
+
−
  [http://www.wilko.com/all-hand-tools/wilko-sledge-hammer-3lb/invt/0343401 Wilko Sledge Hammer 3Lb] £12.00
+
−
  [http://www.wilko.com/all-hand-tools/wilko-wooden-mallet-4in/invt/0209045 Wilko Wooden Mallet 4in] £4.25
+
  
−
Wilko disallow online shopping for some pointy things, so an awl and Stanley knife are also needed. We need an actual tool storage device too - I'm considering building a mobile toolstand rather than having things in a semi-organised heap on the floor.
+
  Floor / working party specific stuff:
 +
  [https://www.hss.com/hire/p/floor-and-edge-sander-hire-pack HSS sander, no idea when offer expires though]
 +
  [https://www.jewson.co.uk/tool-hire/power-tools/sanders/products/5720/special-combined-rate3a-floor-sander-26-edge-sander/ Jewson sanders, cheaper when not on offer]
 +
  [https://www.screwfix.com/p/heavy-duty-scraper-4/16530 scraper]
 +
  [https://www.screwfix.com/p/heavy-duty-scraper-blades-4-10-pack/11566 blades]
 +
  [https://www.screwfix.com/p/disposable-coverall-white-x-large-53-chest-33-l/492fh suits]
 +
  [https://www.screwfix.com/p/delta-plus-m1304v-4-panel-foldable-valved-mask-p3-10-pack/221cc masks]
 +
  [https://www.toolstation.com/cloth-sanding-belt-75-x-457mm/p15711 40 grit 5 pack, fits our sander - Screwfix belts twice this price!]
 +
  [https://www.screwfix.com/p/site-dextrogrip-nitrile-foam-coated-gloves-red-black-large/7082j large work gloves]
 +
  [https://www.screwfix.com/p/ansell-solvex-37-675-chemical-resistant-gloves-blue-medium/5906h Chemical resistant gloves]
 +
  [https://www.screwfix.com/p/keep-safe-pu-palm-gloves-black-medium/8171h good but cheap 'disposable' work gloves]
 +
  [https://www.screwfix.com/p/site-premium-safety-goggles/9186k vented splashproof goggles]
  
−
Current total '''£165.25'''.
 
  
−
I'd suggest that we keep the current toolbags around for now, but that any tools used from them are made a note of. After a while we'll build up a clearer picture of what else we need to add to ours.
+
  Wilko cheaper comparables/uniques
 +
  [http://www.wilko.com/all-hand-tools/wilko-combination-square-305mm/invt/0209181 Wilko Combination Square 305mm] * 2 £12.00
 +
  [http://www.wilko.com/all-hand-tools/wilko-wooden-mallet-4in/invt/0209045 Wilko Wooden Mallet 4in] £4.25
 +
  [http://www.wilko.com/all-hand-tools/wilko-wood-chisel-set/invt/0343911 Wilko Wood Chisel Set] £6.00
 +
 
 +
====Hand tools====
  
−
Other useful related things:
 
  
 
* http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398 '''£9.99'''
 
* http://www.ebay.co.uk/itm/Combination-Square-Set-Angle-Finder-Protractor-Spirit-Level-Steel-Ruler-Mitre-/201742708398 '''£9.99'''

Latest revision as of 18:06, 25 February 2019

Page Intent

(The items linked here are probably the lowest available price, but due to the quantity of data I've been digging through I cannot do exhaustive searches on everything so this is not currently certain.)

Where possible, tools are emphasised over materials. The idea is to increase the range of our abilities, via either new avenues or extending capabilities of current equipment. The table has delusions of being a spreadsheet and does almost clever things. Edit carefully if you have to!


The Wishlist Proper

Usage: Budget category is for accounting/overview purposes, and automatic totalling. By the same token Cost is cleaned line cost eg 3 * goggles at '£3-5ish' == 3*4 == £12. For specifically costed items that only one are needed of, this is a duplicate of Price.

Options: 

 Workshop T&E (Currently: PPE, additional tools/measures.)
 Workshop Machinery (Currently: bobbin sander. Planer/thicknesser, bandsaw need costing. Potentially radial arm drill also, price depending.)
 Workshop T&E Other (Stuff we borrow that we should probably own, eg replacement hand tools)
 Main Room T&E (Includes another god-tier soldering bay, CR10S, bench PSU and the laser airflow modification)
 Maintenance and Improvement (Currently gas fitting, which needs costing. Air filter and the workshop shelves would be good to have too)
 Essential Materials (wood, filament, resin, screws, glue, solder, etc.)

Some tools span room usage or purpose, eg calipers are used for more than woodwork, gloves all sorts, but until category numbers need adjusting I'm using which room it'll be stored in as the delimiter. Big Things are usually at the base of their section.

Please do not change table structure. Javascript automatically updates '£subtotal' fields based on cell position/indexes.

Item Type Budget Category Description Rationale / Notes Price Cost URL
Depth gauge Measuring Workshop T&E Calipers for depth. For making sure that the table saw or router really IS set for exactly X mm. Calipers with depth gauges aren't ideal for this as both the body and needle are too narrow; a gauge rides the highest points of the router bit / saw blade and spans the recess it emerges from. £16.99 £16.99 https://www.amazon.co.uk/Trimmer-Router-Digital-Measuring-40141500/dp/B0713TZRP6/ref=sr_1_3?s=diy&ie=UTF8&qid=1516207783&sr=1-3&keywords=digital+depth+gauge
Carving Chisels Woodworking Workshop T&E Detailed chisels for more than just straightforward wood removal For hand carving and detailing. Better quality tools are certainly available, but price escalates quickly. A set has been promised to us. £21.99 £21.99 https://www.ebay.co.uk/itm/VonHaus-12pc-Chisel-Set-Precision-Wood-Carving-Sharpening-Stone-Storage-Pouch/272756351795
Encompassing goggles Utility, PPE Workshop T&E Goggles with sideeye protection Vented, and also wearable over glasses. £4.99 £9.98 https://www.screwfix.com/p/site-premium-safety-goggles/9186k
Lab coats or overalls Utility, PPE Workshop T&E Protective clothing Useful for painting, resin work, ousting Amy, and other messy activities. £10-15. £12 * 2 ? £24 Sources various depending on type. I have a contact who can embroider our logo on them if desired.
Magnet Utility Workshop T&E Magnet Useful for finding/clearing nails from the workshop floor £5.39 £5.39 https://www.ebay.co.uk/itm/37-67-90KG-Recovery-Magnet-Hook-Strong-Sea-Fishing-Diving-Treasure-Hunting-NEW/311921068962
Fubar Tool Workshop T&E Multi-purpose demolition tool Exceptionally useful for breaking pallets down. Also effective against the undead. £30ish £30 Example: https://www.ebay.co.uk/itm/STANLEY-STA155099-FatMax-Fubar-Utility-Bar-XL/352233983943
Angle Grinder Stand Tool Workshop T&E Angle grinder + chop saw For heavier metal work and when the mitre saw has a fine blade in. Can fill many roles depending on equipped discs - very versatile! £21.23 £21.23 https://www.ebay.co.uk/itm/Wolfcraft-5019000-Angle-Grinder-Stand-NEW/282047893785
Cross Vise Utility Workshop T&E A cross vice for the drill press. Irreplaceable for precision tasks. £47.98 £47.98 https://www.machinemart.co.uk/p/clarke-4-inch-cross-vice-ccv4c/
Workshop T&E Subtotal: £subtotal
Radial Drill Tool Workshop T&E Machinery Extendable powerful drill Deeper throat and greater depth. Also means the current drill can be dedicated for a given purpose eg lowspeed metalwork. £319.96 £319.96 https://www.axminster.co.uk/axminster-craft-ac680rd-floor-radial-drill-105112
Air filter Utility Workshop T&E Dust / air filter Will need fittings/filters too. £394.04 £394.04 http://www.axminster.co.uk/jet-afs-1000b-air-filtration-system-310481
Workshop T&E Machinery Subtotal: £subtotal
Angle gauge / inclinometer Measuring Workshop T&E Other Calipers for angles. Dead handy for attaching to saw blades or tables (eg drill press, sander, bandsaw) to make sure that it actually really IS 90 / 45 degrees, not just 'roughly'. Much time and hair is saved. £16.59 £16.59 https://www.amazon.co.uk/Tacklife-Protractor-Portable-Pocket-Size-Inclinometer/dp/B072KGHZY9/ref=sr_1_4?ie=UTF8&qid=1516207657&sr=8-4&keywords=digital+angle+gauge
Countersunk pilot drill bits Woodworking Workshop T&E Other Drill bits With countersinks. Attached! Saves so much time. £7.89 £7.89 https://www.amazon.co.uk/Yakamoz-Countersink-Woodworking-Chamfer-3-10mm/dp/B01HCHRMOU/
Riveter Tool Workshop T&E Hand-held riveter Also comes with variously sized rivets. £19.84 £19.84 https://www.ebay.co.uk/itm/Draper-27848-2-Way-Hand-Riveter-Kit-Pop-Rivet-Gun-Hand-Riviter-Tool-New-19782/391987393786
Engineers Calipers Measuring Workshop T&E Other High calibre calipers. Useful for many tasks involving measurement, especially try-test work - in particular the earwigs are invaluable for hollow objects & lathed bowls. £14.39 £14.39 https://www.machinemart.co.uk/p/et153-3-piece-spring-caliper-set/
Bench vice Utility Workshop T&E Other Mountable vice and small anvil for metalwork & friends For holding workpieces for on-table operations. This model also has a small anvil plate for light whacking tasks. [* smaller version] £28.79 £28.79 https://www.machinemart.co.uk/p/clarke-100mm-bench-vice-cvr100b/
Rasp and file set Tool Workshop T&E Other For subtractive handwork, especially on woods and metals Since we have none to speak of, other than Adam's 2 knackered old woodrasps, and one veteran square edge metal file. With fishing on Ebay or Amazon prime only offers this will be cheaper than Draper purport. It's a lovely set. £20-60 £40 https://www.drapertools.com/product/44961/200mm-Soft-Grip-Engineers-File-and-Rasp-Set-(8-Piece)
Tap and die set Tool Workshop T&E Other For making threaded holes and threaded things what goes in those holes Prices vary wildly depending where you ask versus what quality. [ * midrange set ] £10-50 £30 https://www.screwfix.com/p/hss-steel-tap-and-die-set-51pc/12834
Workshop T&E Other These items are currently available, but only as they've been loaned. Subtotal: £subtotal
3D Printer Equipment Main Room T&E Creality 10S For capacity £379.88 £379.88 https://www.amazon.co.uk/Creality-3D-Aluminum-Upgraded-High-precisio/dp/B076BRF8S6/
3D Printer Equipment Main Room T&E Ender 3 For output bandwidth £196.96 £196.96 https://www.amazon.co.uk/Comgrow-Creality-Ender-Printer-Aluminum/dp/B07BR3F9N6
3D Printer Equipment Main Room T&E Prusa I3 For output bandwidth & later MMU attachment £186 £186 https://www.amazon.co.uk/GEEETECH-Printer-Aluminum-Assembled-220×220×260mm/dp/B07F42RRDN/
Laminator Equipment Main Room T&E For handouts, notices etc A4 and A3. A3 pouches here, A4 here £53.99 £53.99 https://www.staples.co.uk/laminating-machines/cbs/297790298.html
Main Room T&E Subtotal: £subtotal
Under Rafter Shelves Fitting Maintenance and Improvement Shelves & trays for the store room dead space. See section below. £263.49 £263.49 Details and plans
Maintenance and Improvement Subtotal: £subtotal
Non-core component kits Consumables Essential Materials Other related components Crimps, heatshrink, PCB blanks, jumpers & sockets, voltage regulators, etc £51.36 £51.36 See breakdown below Details
Useful IC chips Consumables Essential Materials IC chips and sockets. Counters, logic, flipflops, opamps, etc. £17.58 £17.58 See breakdown below Details
Resin & Friends Consumables Essential Materials Resin casting equipment and essential materials After some liaising with David, this covers everything we need for holding casting workshops. £271.00 £271.00 Various suppliers
Essential Materials Subtotal: £subtotal
Total £tree.fiddy


Note that the resin materials will pay for themselves, the workshops will charge enough to cover the usage, and over time will net more paying members.

Workshop T&E Other are hand tools that we already have, but only due to loans. Ideally we need to start owning some of the core stuff outright.

Disregarding those two figures, the total drops by £632.60 - currently to £2594.75.


Details and Rationale

Soldering Workbay

Costing assumes that NO DISCOUNT is available from Rapid. Hopefully we can wrangle something. Specific bay loadout as previously used; each bay contains:

Item Type Budget Category Description Rationale / Notes Price Cost URL
Soldering Station Tool Main Room T&E Steve’s Kitlist Atten ST-60 Premium Intelligent Soldering Station 60W £82.15 £82.15 https://www.rapidonline.com/85-6924
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-0.8 900M Series Soldering Tip Chisel 0.8mm £2.99 £2.99 https://www.rapidonline.com/85-6942
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-2.4 900M Series Soldering Tip Chisel 2.4mm £2.99 £2.99 https://www.rapidonline.com/85-6938
Soldering Tip Tool Main Room T&E Steve’s Kitlist Atten 900M-T-2C 900M Series Soldering Tip Sloped 2mm £2.99 £2.99 https://www.rapidonline.com/85-6944
Tip Cleaner Tool Main Room T&E Steve’s Kitlist Xytronic 460 Brass Wool Solder Tip Cleaner £4.77 £4.77 https://www.rapidonline.com/85-0626
Tip Cleaner Refill Consumable Main Room T&E Steve’s Kitlist Xytronic 459 Brass Wool Solder Tip Cleaner Refill £1.67 £1.67 https://www.rapidonline.com/85-0628
Solder Consumable Main Room T&E Steve’s Kitlist Rapid Solder Wire 60/40 22SWG 0.7mm 100g Reel £4.67 £4.67 https://www.rapidonline.com/85-0592
Solder Consumable Main Room T&E Steve’s Kitlist Rapid Lead-Free Solder Wire 22SWG 0.7mm 100g Reel £5.09 £5.09 https://www.rapidonline.com/85-1166
Pliers Tool Main Room T&E Steve’s Kitlist CK Tools T3889 Ecotronic ESD Long Snipe Nose Pliers £9.99 £9.99 https://www.rapidonline.com/93-3421
Cutters Tool Main Room T&E Steve’s Kitlist CK Tools T3887 Ecotronic ESD Side Cutters £10.40 £10.40 https://www.rapidonline.com/93-3419
Lamp Tool Main Room T&E Steve’s Kitlist Xytronic JF-33CB Superior Illuminated Lamp £69.33 £69.33 https://www.rapidonline.com/86-3333
Power Supply Tool Main Room T&E Steve’s Kitlist Uni-T UTP3705S 0-32V 5A DC Power Supply 2 Channel £178.94 £178.94 https://www.rapidonline.com/85-4048
Multimeter Tool Main Room T&E Steve’s Kitlist Uni-T Intelligent Digital Multimeters UT71B £118.73 £118.73 https://www.rapidonline.com/85-4065
Screwdriver Set Tool Main Room T&E Steve’s Kitlist Wera 05030170001 1578A/6 6-Piece ESD Kraftform Micro Screwdriver Set £20.06 £20.06 https://www.rapidonline.com/54-7139
Ruler Tool Main Room T&E Steve’s Kitlist CK Tools T3530 12 Steel Rule 300mm/12" £6.23 £6.23 https://www.rapidonline.com/86-1480
Stabby Thing Tool Main Room T&E Steve’s Kitlist Stanley 0-10-150 SM9 Snap Off Blade Knife 9mm £1.82 £1.82 https://www.rapidonline.com/86-0054
Refill for Stabby Thing Consumable Main Room T&E Steve’s Kitlist Stanley 0-11-300 Snap Off Replacement Blades 9mm - Pack Of 10 £2.78 £2.78 https://www.rapidonline.com/86-0055


Total cost: £525.60


New Stuff

Major purchases are hopefully eligible for match funding, probable candidates in itallics. 

- Budget Metalworking / Welding ($blocktotal);
  http://amzn.eu/d/2NBAijT £229.08 Tig/mma Air Plasma Cutter
  http://amzn.eu/d/f1pyRxV £17.54 Welding Helmet Auto Darkening
  http://amzn.eu/d/iyQ0F4m £4.16 Welders Gauntlets
  http://amzn.eu/d/04DCsd1 £15.70 Welding Clamps
  http://amzn.eu/d/gCLqVS3 £7.48 Welding Magnets x4
  http://amzn.eu/d/dX2qx56 £2.50 Arc Welding Rods

- Ideal Metalworking / Welding ($blocktotal);
  https://www.r-techwelding.co.uk/tig-mma-welder-dc-pulse-200a-digital-110v-240v/ £549.00 R-Tech TIG Welder DC Digital
  https://www.r-techwelding.co.uk/r-tech-speedmaster-xl-auto-welding-helmet/£54.95 Welding Helmet
  https://www.r-techwelding.co.uk/prestige-silver-leather-tig-welding-glove/£6.50 Welding Gloves
  https://www.r-techwelding.co.uk/1kg-4043a-grade-aluminium-1-6mm-tig-filler-rods/ £10.95 Aluminium Tig Filler Rods
  https://www.r-techwelding.co.uk/1kg-mild-steel-1-0mm-tig-filler-rod/ £14.90 Steel TIG Filler Rods
  A plasma cutter was mentioned - this would be godly, especially if we strap it to a CNC rig later.

- Metalworking Bench and tools ($blocktotal);
  https://www.machinemart.co.uk/p/cwb1500-engineers-bench/ £239.98 Engineers Bench
  https://www.machinemart.co.uk/p/cwb2000p-2m-production-bench/ £287.98 2m Production Bench
  https://www.machinemart.co.uk/p/clarke-sbr305-3-in-1-universal-305mm-sheet-me/ £274.80 3 in 1 Sheet Metal Machine
  https://www.machinemart.co.uk/p/clarke-ccb1b-compact-bench-mounted-parts-bende/	 £95.98 Bench Mounted Parts Bender
  https://www.machinemart.co.uk/p/csvr100-100mm-steel-vice/ £26.39 100mm Steel Vice
  https://www.machinemart.co.uk/p/cht128-11-pce-metal-file-set/ £14.39 Metal File Set
  https://www.machinemart.co.uk/p/clarke-ap500b-1-2-ton-arbor-press/ £38.39 Arbor Press
  https://www.machinemart.co.uk/p/5pc-cutting-tool-set-for-cl300m/ £19.19 5pc Lathe Tool Set
  https://www.machinemart.co.uk/p/clarke-cht775-52-piece-metricunfbsp-tap-and/ £65.99 Tap And Die Set
  https://www.machinemart.co.uk/p/cbs45md-41-2in-x-6in-metal-cutting-ban/ £322.80 Metal Cutting Bandsaw

- Blacksmithing (awaiting information on possible donations/loanations/purchase opportunities)
  Anvil, heavier the better - cheap Chinese have reputation of being made of cast iron, ie. non-heattreated and soft, don’t go that way. East-Europeans etc. are usually OK. The anvil needs a proper block under it, and ideally a horn. Railway track can be used to make smaller specific-purpose anvils.
  Some anvil tools are needed, cutting wedge and iron plate for hot-cutting.
  Hammers & tongs - more the merrier - and for once, here diversity is a good thing! Minimal core; 1kg, 1,5kg and a 2 kg straight peen blacksmiths hammers, a couple smaller ball peen hammers and some basic tongs should suffice for a start. Mole grips/clamps also handy.
  Working tables, at least one with a metal surface. Need to think about weatherproofing.
  The actual forge. Probably gas powered tube-forge for efficiency, no reason we couldn't make another size later if needed.
  A few vices are a must.
  Some literature about the craft would come handy too
  A power hammer would be amazing, and save us pissing the neighbours off.

- Sharable with the metalshop:
  Loads of hand tools, angle grinders of different sizes, files,  metal brushes, pliers, hack-saws, etc.
  Protection stuff, goggles, respirators, earmuffs, maybe panzers or coveralls too.

- Misc art/craft kit
  https://www.ebay.co.uk/itm/Mini-AirBrush-Compressor-0-4mm-Needle-Kit-for-Makeup-Cake-Nail-Art-Tattoo-Hobby/381480491595
  https://www.ebay.co.uk/itm/62x-Silicone-Mould-Mold-for-DIY-Resin-Round-Necklace-jewelry-Pendant-Making-tool/202505196223
  https://www.ebay.co.uk/itm/French-Curve-Ruler-Set-of-12-Rulers-Drawing-Template-Fashion-Sewing-Dressmaking/201737811334

- Infrastructure
  CAT5 reel or two.

Materials / Consumables.

- Non-core components and friends ($blocktotal);
  400 header pins £2.29 https://www.ebay.co.uk/itm/10-x-40-Pin-Header-Pins-Strip-PCB-0-1-2-54mm-for-Arduino-Breadboard-UK-Seller/400858209683
  40pcs PCB Blanks £6.94 https://www.banggood.com/40pcs-FR-4-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-995732.html?rmmds=detail-top-buytogether-auto__4&cur_warehouse=CN
  328pcs Heatshrink tubing £3.39 https://www.banggood.com/Soloop-328pcs-21-Polyolefin-Halogen-Free-Heat-Shrink-Tube-Sleeving-5-Color-8-Size-p-969574.html?rmmds=detail-top-buytogether-auto__8&cur_warehouse=CN
  1000pcs Crimps and terminals £14.18 https://www.banggood.com/1000Pcs-Electrical-Wire-Connector-Insulated-Crimp-Terminals-Spade-Assorted-Set-p-1060461.html?rmmds=category&cur_warehouse=CN
  600pcs M1-1.6 nut & screw set £2.59 https://www.ebay.co.uk/itm/600Pcs-12-Kinds-Of-Nuts-Screws-Electronics-Assortment-M1-M1-2-M1-4-M1-6-Kit/262802755687
  82pcs USB Connectors £6.54 https://www.banggood.com/14-Styles-USB-Male-Female-Mini-SMD-Vertical-Socket-Connector-For-DIY-p-1099042.html?rmmds=category&cur_warehouse=CN
  310pcs Jumper pins and connectors £2.93 https://www.banggood.com/Geekcreit-310pcs-2_54mm-Male-Female-Dupont-Wire-Jumper-With-Header-Connector-Housing-Kit-p-1063303.html?rmmds=detail-top-buytogether-auto__3&cur_warehouse=CN
  10pcs (*40) Header pins £1.04 https://www.banggood.com/10-Pcs-40-Pin-2_54mm-Single-Row-Male-Pin-Header-Strip-For-Arduino-p-918427.html?rmmds=detail-top-buytogether-auto__3&cur_warehouse=CN
  50pcs Power jack sockets £1.30 https://www.banggood.com/50pcs-DC-005-3Pin-Black-DC-Power-Jack-Socket-Connector-5_52_1mm-p-1127042.html?rmmds=category&cur_warehouse=CN
  10pcs MD2307 voltage regulators £2.86 https://www.ebay.co.uk/itm/10X-Supper-mini-3A-DC-DC-Converter-Step-Down-buck-Power-3-5-16V-MP2307-Chip-V1B3/282726121311
  70pcs L7805-LM317 asst. voltage regulators £9.59 https://www.ebay.co.uk/itm/70Pcs-L7805-LM317-14-Values-Transistor-Kit-Voltage-Regulator-With-Storage-Box/292120327676
  10pcs Optocouplers £0.99 https://www.ebay.co.uk/itm/10Pcs-PCB-Board-Through-Hole-PC817C-PC817-EL817-817C-Optocoupler-DIP-4-N6R/182529906377?hash=item2a7fa156c9:g:aGIAAOSwmgJY8JjD
  50pcs Voltage references £0.99 https://www.ebay.co.uk/itm/50PCS-TL431A-TL431-TO92-Programmable-Voltage-Reference-NEW/191739488688?



- Useful IC chips, and sockets; lots and cheap ($blocktotal);
  £0.99 https://www.ebay.co.uk/itm/20Pcs-SOP-16-ULN2003-ULN2003A-Darl-Trans-Array-Ti/113005586175?hash=item1a4fa866ff:g:Bh8AAOSwSCZbPx6R
  £1.18 https://www.ebay.co.uk/itm/10pcs-CD4511-CD4511BE-4511-CMOS-BCD-to-7-segment-Latch-Decoder-IC-RGZY/153034986927?hash=item23a19895af:g:i6wAAOSwN-la9TRg
  £0.99 https://www.ebay.co.uk/itm/10PCS-TL082-TI-DIP8-IC-JFET-INPUT-OPERATIONAL-AMPLIFIERS/191773766157?hash=item2ca69b720d:g:Qx8AAOSwGotWiN1d
  £0.99 https://www.ebay.co.uk/itm/10Pcs-TL084-TL084CN-DIP-14-Quad-JFET-Input-Op-Amp-IC-NEW/191821307714?epid=1488761590&hash=item2ca970df42:g:iwMAAOSwP~tW3U5y
  £0.99 https://www.ebay.co.uk/itm/10-Pcs-LM324N-LM324-324-Low-Power-Quad-Op-Amp-IC-TOP/253108878435?hash=item3aee76fc63:g:6tIAAOSwWLFZm9XP
  £0.99 https://www.ebay.co.uk/itm/10Pcs-Operational-Amplifier-DIP-8-UA741-LM741-St-UA741CN-New-Ic/382468615537?hash=item590ce7ed71:g:XxwAAOSwvrxbQjBt
  £1.23 https://www.ebay.co.uk/itm/10PCS-CD4040-4040-Ripple-Carry-Binary-Counter-Divider-IC-NEW/311518155397?hash=item4887edd285:g:UooAAOSwJkJWiyUl
  £2.69 https://www.ebay.co.uk/itm/50Pcs-Smd-Counter-Divider-SOP-16-CD4017-4017-Ic-New/382468616355?hash=item590ce7f0a3:g:cmEAAOSwHlRbQjDZ
  £2.10 https://www.ebay.co.uk/itm/20PCS-CD4093BE-CD4093-4093-DIP-14-TI-CHIP-IC-new/142650976792?hash=item2136a92a18:g:hTwAAOSwH6lXQukL
  £1.49 https://www.ebay.co.uk/itm/100PCS-8-Pin-DIP8-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/191738593245?hash=item2ca482bfdd:g:-BsAAOSwcdBWSEF8
  £1.40 https://www.ebay.co.uk/itm/50PCS-16-Pin-Integrated-Circuit-IC-Sockets-Adaptor-Solder-Type/141663389081
  £2.54 https://www.ebay.co.uk/itm/5PCS-L293D-L293-Push-Pull-Four-Channel-Motor-Driver-IC-DIP-16-EC/192583520097

- Still to cost: Workshop consumables
  Wood glue
  Super glue
  Duct tape
  Sandpaper
  Sanding sponges; Festool ones seem good
  WD40
  3-in-1

- Kitchen etc
  - cleaning materials
  - teabags / coffee
  - blueroll


Workshop materials

As in materials for running workshops, to get people interested. Ideas have so far included laser box making, silver jewellery casting, and resin casting (David).

First priority is working out what workshops we wish to run. Second is if we want to bother explicitly costing them, or just fund them from the float & repay that from the day's fees. We do however need enough stock material and equipment on hand for the process.

Resin has been costed now. Laser boxes require absolutely nothing new - hopefully this can be a regular workshop if it goes well.

Silver casting; gas, a blowtorch, a crucible, and an old saucepan full of sand are all we need. There are a few other cheap bits but no need listing them.

To research / add:

Lathe tools. At the least, a roughing gouge of our own would be prudent.
Some existing long-term loan tools need TLC. The table saw needs a new blade, Jon had to buy a new chop saw fence recently, and the belt sander needs a new belt. The bandsaw needs shooting.
CAT5 too
A3 laminator
A3 printer
kiln
Forge construction materials
Anvil
Anvil tools
Plasma cutter!


Screen printing equipment has been suggested. Digital and/or oldschool? This is a beast I am unfamiliar with. Space is also a factor. A 'starter kit' seems to be about £60, but is mostly consumables. If someone with time and preferably subject expertise could research this I'd appreciate it, I'm oversaturated with research as it is and it's not one of the areas I've worked with (unbelievable but true).

A 'better' front door camera. Awaiting thoughts from Jon. We have potentially been offered a free replacement from Sir James, uncertain as to timeframe or quality though.

Long-term consumables may be worth investing in. In particular, paints, wood dyes and finishes spring to mind. On a related note, also paintbrushes.

Resin paraphernalia.

Building infrastructure

Artist's impression of proposed shelving. Rumours of a magic carpet launch silo are entirely unsubstantiated.

The Under Rafter shelves

 Total: $blocktotal
 Ply, assume  18x1220x2440mm 5 * £34.99 ; £174.93 (a lot of flat surface to cover here)
 CLS, 3 * £2.50 ; £7.50
 Casters, assume 8 bays * £4.29 pack 4 casters ; £34.32
 Screws, 500 * 1; £4.99

CLS: 45cm * 7 * 2; 6.3m / 2.4m = 3 beams; £7.50. If we need support under, 2 * 5.6 = 11.2 / 2.4m = 5 beams; +£12.50

Plywood: 80cm * 120cm * 6 = 2 sheets, 5.6m * 80cm = +3 sheets. Technically can do 2 sheets but the joints would be everywhere.

It might be worth giving each 'bay' a plastic or fabric curtain to stop dust getting back there, otherwise boxes and such will become dust traps. This may potentially affect air movement and thus damp issues though. Prices are from Wickes. Are we limiting this enterprise to one side only? Assuming so for now.

Main Room Additions

  • Sharpies.
  • More drawing equipment - I've equipped us with basic geometry and stationery, but curve rulers would be excellent.
  • Cutting mats
  • Metal rulers with nonslip backing
  • Actual scalpels, and a more rugged general craft knife

Craft 'starter kits'

To expand options. Note that many of these tools are cross purpose.

  • Leatherwork
  • Wirework
  • Sculpting/waxwork
  • Casting
  • Papercraft
  • Painting/finishing. Brushes, pallets and solvents etc.
  • Fabric/textiles.

Workshop Equipment

Toolstation/Screwfix versions of hand tool list (BOUGHT, reference only!)

Where possible. Wooden mallet & 'paint-tier' chisels unobtainable cheaply. 

 Small core tool set £29.99
 Pin hammer £2.75
 Crosspein £6.99
 Ballpein £7.99
 Assembly mallet, with a nonmarking face £8.89
 General saw £7.99
 Tenon saw £7.99
 Hacksaw £10.99
 Long hacksaw blades £4.99
 Small hacksaw blades £3.99
 Pliers £19.99
 Mole grips £8.99
 Carpenter's pincers £3.38
 Snips £17.99
 Heavy strippers £12.99
 Full spanner set £4.48
 workshop hex keys (Wilko have cheaper but not as nice) £7.49
 nail punches £4.99
 centre punches £5.15
 cold chisel £9.99
 Mini sledge £21.76
 Wallpaper scissors (for craft group) £4.99

 £214.75 total

 Floor / working party specific stuff:
 HSS sander, no idea when offer expires though
 Jewson sanders, cheaper when not on offer
 scraper
 blades
 suits
 masks
 40 grit 5 pack, fits our sander - Screwfix belts twice this price!
 large work gloves
 Chemical resistant gloves
 good but cheap 'disposable' work gloves
 vented splashproof goggles



 Wilko cheaper comparables/uniques
 Wilko Combination Square 305mm * 2 £12.00
 Wilko Wooden Mallet 4in £4.25
 Wilko Wood Chisel Set £6.00

Hand tools

Current total £24.21

Retrieved from "https://home.ipswichmakerspace.com/mediawiki/index.php?title=Current_wishlist&oldid=1238"