Difference between revisions of "User talk:Areid"

From ipswichmakerspace
Jump to: navigation, search
m
m
 
(82 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
Notes:
 
Notes:
 +
 +
  choco feature enable -n allowGlobalConfirmation
 +
  choco install firefox 7zip inkscape paint.net malwarebytes python2 slic3r-prusa autodesk-fusion360 treesizefree
 +
  rdworks
  
 
  https://www.popularwoodworking.com/projects/drawer-helpers
 
  https://www.popularwoodworking.com/projects/drawer-helpers
 
  http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
 
  http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
 +
https://www.youtube.com/watch?v=JL3uZ88vA_0
 +
https://codepen.io/creotip/pen/jEWGQM
  
 +
http://www.doctormonk.com/2012/01/arduino-timer-library.html
 +
https://www.instructables.com/id/Arduino-an-easier-way-to-work-with-seven-segment-/
 +
https://www.allaboutcircuits.com/projects/control-a-motor-with-an-arduino/
  
−
* quick wooden fingers for routing etc, kerfhinge+tape?
 
−
* drill press XY base to mount clamp on.
 
−
* mounting options for normal plate. XY compatible?
 
−
* drill press lift; wedge format?
 
−
* calibrate depth cubes
 
−
* print cyclone exit cap , mod fan etc etc.
 
−
* cyclone; inlet, overflow/, outlet. assemble base/.
 
−
* tuck racking - BT?
 
−
* pallet cracker 2
 
  
 +
dot test image - find optimal focus depths
 +
test 45% power speeds for test pattern on moly and calsulph, 30 60 90 120 150
 +
try a crest on helios, mdf? high speed, maybe 15% power
 +
need to work out top speed for details, try 25 50 100 150 200 250 300 with simple test pattern
  
−
router table;
 
−
* sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
 
−
* wedge router lift, m6 based.
 
  
 +
https://www.kitronik.co.uk/materials/polypropylene/0-5mm-polypropylene-sheets.html
  
−
  http://www.exportandgeneral.co.uk/hackspace-community-group-insurance.php
+
 
−
  https://www.zurich.co.uk/en/charity-insurance/ppc/mens-shed-and-hack-space
+
Misc todo, standardise air compressor fittings/attachments. Matt also on the case.
 +
 
 +
 
 +
 
 +
Bodgables:
 +
 
 +
 
 +
  https://www.ebay.co.uk/itm/12-DAPPING-PUNCHES-DOMING-BLOCK-25MM-12-DEPRESSIONS-WOODEN-STORAGE-STAND/111460222545
 +
 
 +
 
 +
 
 +
https://www.ebay.co.uk/itm/Jewelry-Jewelers-Micro-Mini-Gas-Little-Torch-Welding-Soldering-Kit-5-Tips-UK/283069983524
 +
 
 +
 
 +
make new helios cap for extending air blast to long-focus work
 +
 
 +
http://theselfsufficientliving.com/8-homemade-power-hammer-for-forging/
 +
 
 +
* https://www.thingiverse.com/thing:2478547 fpv
 +
* https://hackaday.io/project/25092/gallery#54352ad35fe17387f1fd4708e54bd023
 +
 
 +
 
 +
 
 +
 
 +
lightblade
 +
https://swift-cut.co.uk/sample/ DTB?
 +
 
 +
 
 +
 
 +
 +
offset white paper for box
 +
file edges, remove base.
 +
silicone top on?
 +
 
 +
<pre>
 +
triage cost list for Big Stuff;
 +
a3 laminator https://www.staples.co.uk/laminating-machines/cbs/297790298.html
 +
a3 printer https://www.amazon.co.uk/Canon-8746B008AA-PIXMA-iP8750-Printer/dp/B00I3ZISVW/
 +
that vinyl cutter. check fb history for thoughts
 +
  kiln
 +
forge construction materials
 +
anvil
 +
anvil tools
 +
 
 +
 
 +
https://www.rapidonline.com/bresser-optik-biolux-cea-usb-microscope-set-40-1024x-49-0140
 +
 
 +
 
 +
 
 +
 
 +
Infrastructure:
 +
ACN hardware - details needed on what though. Maybe Phil?
 +
CAT5 reel, or two.
 +
 
 +
 
 +
 
 +
 
 +
https://www.cloudraylaser.com/products/usa-cvd-znse-focus-lens-dia-20mm-fl-50-8-63-5-101-6mm-1-5-5?variant=7645039067187
 +
 
 +
https://www.axminster.co.uk/self-adhesive-abrasive-discs-ax23196?sel=702858
 +
https://www.axminster.co.uk/mixed-pack-of-sanding-belts-100-x-915mm-100202
 +
https://www.axminster.co.uk/axcaliber-contract-250mm-tct-saw-blades-ax826567 40t 30bore
 +
https://www.axminster.co.uk/japanese-saw-rasp-384015
 +
https://www.axminster.co.uk/veritas-carver-s-knife-475635
 +
dimmer for grinder; https://www.amazon.co.uk/dp/B000LAU04K/
 +
</pre>
 +
 
 +
 
 +
 
 +
<pre>
 +
Preferred vendors:
 +
Rapid
 +
Amazon
 +
 
 +
 
 +
 
 +
Workshop
 +
sanding pad/board. ask Guy re ones that won't self-destruct.
 +
 
 +
Soldering
 +
https://www.rapidonline.com/anvil-av-hh-helping-hands-assembly-aid-magnifier-85-5930
 +
 
 +
craft area;
 +
http://www.argos.co.uk/product/2266433
 +
https://www.rapidonline.com/anvil-av-hh-helping-hands-assembly-aid-magnifier-85-5930
 +
https://www.rapidonline.com/model-craft-pfl6003-budget-riffler-file-set-10-86-3870
 +
https://www.rapidonline.com/siegen-s0896-diamond-needle-file-set-10pc-100mm-89-7601
 +
https://www.rapidonline.com/rolson-42836-6pc-wire-brush-set-86-9140
 +
https://www.rapidonline.com/maul-8213690-atlantic-energy-saving-lamp-11w-52-1245
 +
 
 +
sewing machine!
 +
 
 +
pottery:
 +
clay.
 +
hand tool set/s.
 +
  https://www.ebay.co.uk/itm/Pro-Wood-Wax-Clay-Soap-Carvers-Tool-Modelling-Carving-Sculpting-Pottery-Craft-UK/302414938518?hash=item466955c196:m:mcrCVxIlf9SX_ZS8I5dYPHg I ?
 +
  https://www.ebay.co.uk/itm/DIY-30pcs-Pottery-Clay-Sculpture-Carving-Modelling-Ceramic-Tools-Kit-Craft-Set/372324383266?hash=item56b0433a22:m:mVSCJPokMtYxFDs8LTF8tzA clay abuse set
 +
 
 +
metalwork:
 +
https://www.rapidonline.com/draper-expert-49905-250mm-compound-action-tinmans-aviation-shears-91-2447
 +
overalls?
 +
https://www.rapidonline.com/handled-wire-brushes
 +
 
 +
forge:
 +
instructable list
 +
 
 +
welding:
 +
mask, other ppe?
 +
 
 +
laser:
 +
40w tube (thinklaser maybe?)
 +
 
 +
lab:
 +
rapid basket.
 +
https://www.ebay.co.uk/itm/1x-High-Quality-Lab-Gas-Bunsen-Burner-Lamp-for-Lab-Heating-Transfer-Adapter-Tool/
 +
https://www.ebay.co.uk/itm/SPIRIT-LAMP-ALCOHOL-METHYLATED-BUNSEN-BURNER-LABORATORY-JEWELLER-WITH-FREE-WICKS/272024227538/ rapid version available?
 +
https://www.amazon.co.uk/Sodium-Percarbonate-high-grade-oxygen-cleaner/dp/B00BFYNIQ8
 +
 
 +
 
 +
https://www.rapidonline.com/sodium-acetate-3-water-lr-sodium-ethanoate-ch3coona-3h2o-500g-52-7540
 +
https://www.rapidonline.com/universal-indicator-ph-4-11-100ml-52-7577
 +
https://www.rapidonline.com/methanol-lr-methyl-alcohol-ch3oh-500ml-52-7509
 +
 
 +
 
 +
 
 +
 
 +
https://www.ebay.co.uk/itm/15-Extra-Long-Reach-Adjustable-Long-Nose-Locking-Pliers-Mole-Grip-Garage-Tool/222236478143
 +
https://www.ebay.co.uk/itm/Multifunction-Worktable-Milling-Working-Table-Milling-Machine-Bench-Drill-Vise/292675374576
 +
 
 +
 
 +
 
 +
 
 +
https://www.ebay.co.uk/itm/Dremel-4000-45-4000-4000-1-45-ROTARY-MULTI-TOOL/400465332456  79.99
 +
 
 +
 
 +
https://www.ebay.co.uk/itm/Dual-Action-Air-Brush-Airbrush-Kit-Spray-Gun-compressor-Paint-Art-Cake-Craft-x1/173581205243 22.29
 +
 
 +
 
 +
 
 +
https://www.ebay.co.uk/p/5x-Extra-Long-Nose-Pliers-Set-11-Inch-Straight-Bent-Tip-Mechanic-Equipment-Tool/20003354498
 +
https://www.ebay.co.uk/p/Toolzone-3pc-15-Long-Locking-Plier-Set-DIY-Garage-Workshop-Clamp-Welding/18016971801
 +
 
 +
 
 +
 
 +
</pre>
 +
 
 +
 
 +
<pre>
 +
 
 +
 
 +
Infrastructure priorities:
 +
 
 +
Lighting
 +
A second PIR sensor needs adding to illuminate the stairway lamp before you're in range to headbutt the damn thing.
 +
Sidelights would be nice, but not critical given other concerns.
 +
 
 +
Doorman
 +
Security system needs finishing; PIR sensors need adding.
 +
Expansion needs planning, as Doorman would probably move downstairs.
 +
If users use membership cards to swipe in, that allows access logging, membership status validation (eg green led lights for monthly member, yellow meeting payment, red for unrecognised / expired / etc
 +
 
 +
CCTV
 +
  Needs offsite caching of Notable Events as defined by Doorman information.
 +
  Downstairs needs cameras too, new cctv hub likely required also
 +
 
 +
User system
 +
Payment system needs integrating with membership. Current method won't scale.
 +
Likewise, all keyholders need access to the membership system for reference and the conscription/banking email
 +
User groups will be essential, if not already finished
 +
 
 +
Access control nodes
 +
Membership cards are inserted to allow tool usage / door operation based on user groups.
 +
Usage logging is simple so should be done
 +
Investigate source for code & hooks. Hardware requirements?
 +
 
 +
 
 +
Secure regions:
 +
 
 +
Upstairs;
 +
  Office (move grey cupboard into here?)
 +
 
 +
Downstairs:
 +
  Lab door (or at the very least, chemical & specialist glassware cupboards)
 +
 
 +
 
 +
 
 +
</pre>
 +
 
 +
 
 +
 
 +
 
 +
<pre>
 +
 
 +
 
 +
draw knife
 +
sorby, marples, mathieson. likely ebay best bet.
 +
 
 +
Misc tools:
 +
plastic & wood wet clayworking kit
 +
 
 +
 
 +
 
 +
https://www.amazon.co.uk/Creality-3D-Ender-3-Easy-assemble-Printing/dp/B07DPHR62M/
 +
CR10(s) ?
 +
https://www.amazon.co.uk/dp/B07DLRGWVV/ :|
 +
 
 +
</pre>
 +
 
 +
show expenditure and membership gains on the graph
 +
 
 +
new cogs/square shaft
 +
pick card
 +
ballista test
 +
box lid? dual laserplys in rails?
 +
print holddown
 +
WP updates. fb feed broken. needs piwars updates.
 +
photo of laser tube?
 +
enq re van availability
 +
vinyl cutter software?
 +
 
 +
Test viking box on Helios for 6mm - new setup should make it more efficient. pin joints possible? kerf bending an option now?
 +
clean lens and check orientation
 +
ramp focal test on Selene, 20-16mm.
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
test ebonizing;
 +
shougi , dye, then both!
 +
engraving dying, aging?
 +
 
 +
 
 +
basic box types, demo cuts. 5cm etc.
 +
new clock gears.
 +
ballista faffery
 +
skybox lid & insert
 +
inventor unwrapping
 +
 +
test cnc with solid block, box carving? pathing needed.
  
  
Line 36: Line 278:
 
*test high power defocussed scanning doing something
 
*test high power defocussed scanning doing something
 
*calibrate output when possible.
 
*calibrate output when possible.
−
**test optimal focal point - top left THEN others.
 
  
−
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
+
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
 +
haft jig?
 +
design housing for hummingbird  - test slotted springsteel snippet grafting onto metal & efficiacy
 +
  
 
  coin sorter - dxf etc
 
  coin sorter - dxf etc
 +
 +
<pre>
  
−
spring test bits
+
laser blog post;
−
small box for cash/jam?
+
  
−
plxicorns
 
−
treeshelf
 
  
−
-
+
Laser;
−
  Laser:
+
  bed, flexible, reflective aluminium. iron sheet much preferable
−
  russ re calibration etc.
+
  bed lifters wobble wildly. caps fixed that.
−
  display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.
+
  hex mesh prevents airflow under work.
 +
no crossflow of air due to limited inflow
 +
wildly misaligned aperture on final mirror
 +
lens dirty with tape test residue on top
 +
lens UPSIDE DOWN
 +
airflow valve position is such that it itself impedes flow even when fully open
 +
'KH' tube - could be just about anything from anywhere really.
 +
water pump - suspend rather than try to shock absorb
 +
laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture
 +
bed alignment
 +
broken wire in drag chain
 +
 +
 
  
−
  unipede
+
  PSU. ghost lines on scans caused by miswiring.
−
port spirograph to dxf format
+
  PSU, flyback transformer failed and arcing.
−
etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card
+
−
+
−
http://msraynsford.blogspot.co.uk/2016/09/shark-kits.html
+
−
  one panther.
+
−
+
  
 +
</pre>
  
  
Line 73: Line 324:
 
-
 
-
  
−
printers:
+
 
−
post photos of the calibration tests, distil feedback.
+
  
 
==Wiki==
 
==Wiki==
  
−
Main room page - add photos maybe?
+
Main room page - add / update photos maybe?
  
 
New pages; why and how to join
 
New pages; why and how to join
  
 +
fusion 101
  
 
==Main Site==
 
==Main Site==
  
−
Dead links
+
Old content, general livening up. Needs to project active, lively space.  Diversity of interests & projects.
  
−
Old content, general livening up. Needs to project active, lively space vs just-about-moving.
+
Continue grand fishing campaigns.
  
 
==Policies and Paperwork==
 
==Policies and Paperwork==
−
 
−
 
−
Awaiting feedback:
 
−
 
−
[[Rules_and_Code_of_Conduct]]
 
−
 
−
[[Keyholder_Policy]]
 
−
 
−
[[Health_and_Safety_Policy]]
 
−
 
−
[[Tool_Usage_Policy]]
 
−
 
−
[[Risk_Assessment]]
 
−
 
−
 
−
 
  
  
Line 118: Line 353:
  
  
−
Doorman , WiP.
+
Doorman , WiP... retrieve it from Jon?
  
 
[[Special:LonelyPages]]
 
[[Special:LonelyPages]]
Line 132: Line 367:
 
Laser
 
Laser
 
  kerf book
 
  kerf book
−
coaster
 
−
hinged box
 
 
  clock, obviously.
 
  clock, obviously.
 +
signs
 +
  
−
printers
+
http://spaceapi.net/documentation
−
marble run
+
−
crossbow
+
−
spirograph
+
−
music box
+
−
makerfair bot ?
+

Latest revision as of 15:37, 5 March 2019

Notes: 

 choco feature enable -n allowGlobalConfirmation
 choco install firefox 7zip inkscape paint.net malwarebytes python2 slic3r-prusa autodesk-fusion360 treesizefree 
 rdworks

https://www.popularwoodworking.com/projects/drawer-helpers
http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
https://www.youtube.com/watch?v=JL3uZ88vA_0
https://codepen.io/creotip/pen/jEWGQM

http://www.doctormonk.com/2012/01/arduino-timer-library.html
https://www.instructables.com/id/Arduino-an-easier-way-to-work-with-seven-segment-/
https://www.allaboutcircuits.com/projects/control-a-motor-with-an-arduino/



dot test image - find optimal focus depths
test 45% power speeds for test pattern on moly and calsulph, 30 60 90 120 150
try a crest on helios, mdf? high speed, maybe 15% power
need to work out top speed for details, try 25 50 100 150 200 250 300 with simple test pattern



https://www.kitronik.co.uk/materials/polypropylene/0-5mm-polypropylene-sheets.html


Misc todo, standardise air compressor fittings/attachments. Matt also on the case.


Bodgables: 


https://www.ebay.co.uk/itm/12-DAPPING-PUNCHES-DOMING-BLOCK-25MM-12-DEPRESSIONS-WOODEN-STORAGE-STAND/111460222545



https://www.ebay.co.uk/itm/Jewelry-Jewelers-Micro-Mini-Gas-Little-Torch-Welding-Soldering-Kit-5-Tips-UK/283069983524


make new helios cap for extending air blast to long-focus work

http://theselfsufficientliving.com/8-homemade-power-hammer-for-forging/ 



lightblade
https://swift-cut.co.uk/sample/ DTB?




offset white paper for box
file edges, remove base.
silicone top on?

triage cost list for Big Stuff;
 a3 laminator https://www.staples.co.uk/laminating-machines/cbs/297790298.html
 a3 printer https://www.amazon.co.uk/Canon-8746B008AA-PIXMA-iP8750-Printer/dp/B00I3ZISVW/
 that vinyl cutter. check fb history for thoughts
 kiln
 forge construction materials
 anvil
 anvil tools


https://www.rapidonline.com/bresser-optik-biolux-cea-usb-microscope-set-40-1024x-49-0140




Infrastructure:
 ACN hardware - details needed on what though. Maybe Phil?
 CAT5 reel, or two.




 https://www.cloudraylaser.com/products/usa-cvd-znse-focus-lens-dia-20mm-fl-50-8-63-5-101-6mm-1-5-5?variant=7645039067187

 https://www.axminster.co.uk/self-adhesive-abrasive-discs-ax23196?sel=702858
 https://www.axminster.co.uk/mixed-pack-of-sanding-belts-100-x-915mm-100202
 https://www.axminster.co.uk/axcaliber-contract-250mm-tct-saw-blades-ax826567 40t 30bore
 https://www.axminster.co.uk/japanese-saw-rasp-384015
 https://www.axminster.co.uk/veritas-carver-s-knife-475635
 dimmer for grinder; https://www.amazon.co.uk/dp/B000LAU04K/



Preferred vendors:
 Rapid
 Amazon



Workshop
 sanding pad/board. ask Guy re ones that won't self-destruct.

Soldering
 https://www.rapidonline.com/anvil-av-hh-helping-hands-assembly-aid-magnifier-85-5930

craft area;
 http://www.argos.co.uk/product/2266433
 https://www.rapidonline.com/anvil-av-hh-helping-hands-assembly-aid-magnifier-85-5930
 https://www.rapidonline.com/model-craft-pfl6003-budget-riffler-file-set-10-86-3870
 https://www.rapidonline.com/siegen-s0896-diamond-needle-file-set-10pc-100mm-89-7601
 https://www.rapidonline.com/rolson-42836-6pc-wire-brush-set-86-9140
 https://www.rapidonline.com/maul-8213690-atlantic-energy-saving-lamp-11w-52-1245

sewing machine!

pottery:
 clay.
 hand tool set/s.
  https://www.ebay.co.uk/itm/Pro-Wood-Wax-Clay-Soap-Carvers-Tool-Modelling-Carving-Sculpting-Pottery-Craft-UK/302414938518?hash=item466955c196:m:mcrCVxIlf9SX_ZS8I5dYPHg I ?
  https://www.ebay.co.uk/itm/DIY-30pcs-Pottery-Clay-Sculpture-Carving-Modelling-Ceramic-Tools-Kit-Craft-Set/372324383266?hash=item56b0433a22:m:mVSCJPokMtYxFDs8LTF8tzA clay abuse set

metalwork:
 https://www.rapidonline.com/draper-expert-49905-250mm-compound-action-tinmans-aviation-shears-91-2447
 overalls?
 https://www.rapidonline.com/handled-wire-brushes

forge:
 instructable list

welding:
 mask, other ppe?

laser:
 40w tube (thinklaser maybe?)

lab:
 rapid basket.
 https://www.ebay.co.uk/itm/1x-High-Quality-Lab-Gas-Bunsen-Burner-Lamp-for-Lab-Heating-Transfer-Adapter-Tool/
 https://www.ebay.co.uk/itm/SPIRIT-LAMP-ALCOHOL-METHYLATED-BUNSEN-BURNER-LABORATORY-JEWELLER-WITH-FREE-WICKS/272024227538/ rapid version available?
 https://www.amazon.co.uk/Sodium-Percarbonate-high-grade-oxygen-cleaner/dp/B00BFYNIQ8


 https://www.rapidonline.com/sodium-acetate-3-water-lr-sodium-ethanoate-ch3coona-3h2o-500g-52-7540
https://www.rapidonline.com/universal-indicator-ph-4-11-100ml-52-7577
https://www.rapidonline.com/methanol-lr-methyl-alcohol-ch3oh-500ml-52-7509




 https://www.ebay.co.uk/itm/15-Extra-Long-Reach-Adjustable-Long-Nose-Locking-Pliers-Mole-Grip-Garage-Tool/222236478143
 https://www.ebay.co.uk/itm/Multifunction-Worktable-Milling-Working-Table-Milling-Machine-Bench-Drill-Vise/292675374576




 https://www.ebay.co.uk/itm/Dremel-4000-45-4000-4000-1-45-ROTARY-MULTI-TOOL/400465332456  79.99


 https://www.ebay.co.uk/itm/Dual-Action-Air-Brush-Airbrush-Kit-Spray-Gun-compressor-Paint-Art-Cake-Craft-x1/173581205243 22.29



 https://www.ebay.co.uk/p/5x-Extra-Long-Nose-Pliers-Set-11-Inch-Straight-Bent-Tip-Mechanic-Equipment-Tool/20003354498
 https://www.ebay.co.uk/p/Toolzone-3pc-15-Long-Locking-Plier-Set-DIY-Garage-Workshop-Clamp-Welding/18016971801








Infrastructure priorities:

Lighting
 A second PIR sensor needs adding to illuminate the stairway lamp before you're in range to headbutt the damn thing.
 Sidelights would be nice, but not critical given other concerns.

Doorman
 Security system needs finishing; PIR sensors need adding.
 Expansion needs planning, as Doorman would probably move downstairs.
 If users use membership cards to swipe in, that allows access logging, membership status validation (eg green led lights for monthly member, yellow meeting payment, red for unrecognised / expired / etc

CCTV
  Needs offsite caching of Notable Events as defined by Doorman information.
  Downstairs needs cameras too, new cctv hub likely required also

User system
 Payment system needs integrating with membership. Current method won't scale.
 Likewise, all keyholders need access to the membership system for reference and the conscription/banking email
 User groups will be essential, if not already finished

Access control nodes
 Membership cards are inserted to allow tool usage / door operation based on user groups.
 Usage logging is simple so should be done
 Investigate source for code & hooks. Hardware requirements?


Secure regions:

 Upstairs; 
  Office (move grey cupboard into here?)

 Downstairs:
  Lab door (or at the very least, chemical & specialist glassware cupboards)









 draw knife
 sorby, marples, mathieson. likely ebay best bet.

Misc tools:
 plastic & wood wet clayworking kit



 https://www.amazon.co.uk/Creality-3D-Ender-3-Easy-assemble-Printing/dp/B07DPHR62M/
 CR10(s) ?
 https://www.amazon.co.uk/dp/B07DLRGWVV/ :|


show expenditure and membership gains on the graph

new cogs/square shaft
pick card
ballista test
box lid? dual laserplys in rails?
print holddown
WP updates. fb feed broken. needs piwars updates.
photo of laser tube?
enq re van availability
vinyl cutter software?

Test viking box on Helios for 6mm - new setup should make it more efficient. pin joints possible? kerf bending an option now?
clean lens and check orientation
ramp focal test on Selene, 20-16mm.





test ebonizing;
shougi , dye, then both!
engraving dying, aging?



basic box types, demo cuts. 5cm etc.
new clock gears.
ballista faffery
skybox lid & insert
inventor unwrapping

test cnc with solid block, box carving? pathing needed.


table saw;

  • Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
  • zero clearance inlay, test.
  • sled
    • runners
    • T bar model needs prepping

laser;

  • check alignment
  • test high power defocussed scanning doing something
  • calibrate output when possible.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
haft jig?
design housing for hummingbird  - test slotted springsteel snippet grafting onto metal & efficiacy


coin sorter - dxf etc



laser blog post;


Laser;
 bed, flexible, reflective aluminium. iron sheet much preferable
 bed lifters wobble wildly. caps fixed that.
 hex mesh prevents airflow under work.
 no crossflow of air due to limited inflow
 wildly misaligned aperture on final mirror
 lens dirty with tape test residue on top
 lens UPSIDE DOWN
 airflow valve position is such that it itself impedes flow even when fully open
 'KH' tube - could be just about anything from anywhere really.
 water pump - suspend rather than try to shock absorb
 laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture
 bed alignment
 broken wire in drag chain
 
  

 PSU. ghost lines on scans caused by miswiring.
 PSU, flyback transformer failed and arcing.




dodecahedron
coasters / trivets.

maybe separate logo into outer and inner parts.
stencil for spanner?

test etching in grid form, two factors a time.

-


Wiki

Main room page - add / update photos maybe?

New pages; why and how to join

fusion 101

Main Site

Old content, general livening up. Needs to project active, lively space. Diversity of interests & projects.

Continue grand fishing campaigns.

Policies and Paperwork

Misc Orphans

Replenishment_Requests

Wishlist

Grants


Doorman , WiP... retrieve it from Jon?

Special:LonelyPages

Special:UncategorizedPages

Misc Misc

Demo stuff

Laser 

kerf book
clock, obviously.
signs


http://spaceapi.net/documentation

Retrieved from "https://home.ipswichmakerspace.com/mediawiki/index.php?title=User_talk:Areid&oldid=1250"