Difference between revisions of "Working Parties"
From ipswichmakerspace
m (1 revision imported) |
|||
| Line 1: | Line 1: | ||
Proposed for future working parties | Proposed for future working parties | ||
| + | |||
| + | |||
==ToDo== | ==ToDo== | ||
* Improve lighting | * Improve lighting | ||
| − | |||
| − | |||
* Inventory list to be created | * Inventory list to be created | ||
| + | * Lay a false/drop ceiling to keep heat at a useful height. Materials need discussion and then sourcing. | ||
| + | * Put the insulation in the workshop somewhere more useful. | ||
| + | * (Re)wire the kitchen. | ||
| + | * And presumably some gap filling and then painting would be required. | ||
| + | * Set up the cabinets once the above are completed. | ||
| + | |||
| + | ==Misc Tasks== | ||
| + | |||
| + | |||
| + | * Fiddle with the stair light sensor to make it more helpfully ranged. Currently it will operate when you are already halfway up the stairs, or already on the balcony whilst nightblind from leaving the Space. | ||
| + | * Upgrade front door camera. | ||
| + | * Acquire and deploy a cooker. | ||
| + | * Laser-based necromancy. | ||
| + | * Rack for storage boxes. Mr Pallet might be of help here? | ||
| + | * The Workshop Door. | ||
| + | * Workshop dust management system. Cyclone seperator is in progress - all hoover hose donations much appreciated. | ||
| + | * Fix concerningly squeaky workshop hatch. | ||
| + | * Workshop tool rack. Pegboard based perhaps? | ||
| + | * Wood storage system, ideally on casters. Currently the idea is for sonething like the illicit lovechild of [https://s3.amazonaws.com/vs-lumberjocks.com/mc9mygh.jpg these] [https://cdn.instructables.com/FRF/QWEO/IC0VCWZQ/FRFQWEOIC0VCWZQ.MEDIUM.jpg two] - to this end we also need more pallets and scrap wood. | ||
| + | * Labels for the various anonymous tool boxes | ||
| + | * Clean and deploy the drawers somewhere sensible. | ||
| + | * Sort & assess the supplies / materials / inventables / debris on the workshop racking. Possibly some of these articles could then go in the drawers. | ||
| + | * We have a brand new toilet and a not-so-new shower tray surplus to requirements. They need extracting, photographing and listing somewhere like Gumtree or Ebay. | ||
Revision as of 22:25, 3 December 2017
Proposed for future working parties
ToDo
- Improve lighting
- Inventory list to be created
- Lay a false/drop ceiling to keep heat at a useful height. Materials need discussion and then sourcing.
- Put the insulation in the workshop somewhere more useful.
- (Re)wire the kitchen.
- And presumably some gap filling and then painting would be required.
- Set up the cabinets once the above are completed.
Misc Tasks
- Fiddle with the stair light sensor to make it more helpfully ranged. Currently it will operate when you are already halfway up the stairs, or already on the balcony whilst nightblind from leaving the Space.
- Upgrade front door camera.
- Acquire and deploy a cooker.
- Laser-based necromancy.
- Rack for storage boxes. Mr Pallet might be of help here?
- The Workshop Door.
- Workshop dust management system. Cyclone seperator is in progress - all hoover hose donations much appreciated.
- Fix concerningly squeaky workshop hatch.
- Workshop tool rack. Pegboard based perhaps?
- Wood storage system, ideally on casters. Currently the idea is for sonething like the illicit lovechild of these two - to this end we also need more pallets and scrap wood.
- Labels for the various anonymous tool boxes
- Clean and deploy the drawers somewhere sensible.
- Sort & assess the supplies / materials / inventables / debris on the workshop racking. Possibly some of these articles could then go in the drawers.
- We have a brand new toilet and a not-so-new shower tray surplus to requirements. They need extracting, photographing and listing somewhere like Gumtree or Ebay.
Complete
- Fit curtains (Rails, nets and curtains)
- Fit lock to second room
- Move the cupboard/contents from the church
- Run wired network to main tables Network
- Fit doorbell
- Install permanent sign
- Install our own wireless AP (one AP installed, thanks Phil)
- Work bench for soldering, 3D printing etc, to be built and installed to room onee
- Setup Raspberry Pi work station
- Projector stand
- Projector screen
