Difference between revisions of "User talk:Areid"

Revision as of 10:56, 5 July 2018

Notes:

https://www.popularwoodworking.com/projects/drawer-helpers
http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/

bandsaw?

• drill press XY base to mount clamp on.
• mounting options for normal plate. XY compatible?
• router/drill press lift; wedge format? hinged lever?
• https://www.thingiverse.com/thing:2478547
• https://hackaday.io/project/25092/gallery#54352ad35fe17387f1fd4708e54bd023

new cogs/square shaft
pick card
ballista test
box lid? dual laserplys in rails?
print holddown
WP updates. fb feed broken. needs piwars updates.
photo of laser tube?
cut church svg
enq re van availability
vinyl cutter software?

Test viking box on Helios for 6mm - new setup should make it more efficient. pin joints possible? kerf bending an option now?
clean lens and check orientation
ramp focal test on Selene, 20-16mm.

Doorman
 1.5 ply

Propaganda stands:
 1 mdf

MHAS
 [6 MDFs, 2 plys]
 plaque

test ebonizing;
shougi , dye, then both!
engraving dying, aging?

basic box types, demo cuts. 5cm etc.
new clock gears.
ballista faffery
skybox lid & insert
inventor unwrapping

test cnc with solid block, box carving? pathing needed.

table saw;

• Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
• zero clearance inlay, test.
• sled
  • runners
  • T bar model needs prepping

laser;

• check alignment
• test high power defocussed scanning doing something
• calibrate output when possible.

vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
haft jig?
design housing for hummingbird  - test slotted springsteel snippet grafting onto metal & efficiacy

coin sorter - dxf etc

plxicorns
treeshelf

-

Laser:
russ re calibration etc.
display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.

unipede
etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card

laser blog post;


Laser;
 bed, flexible, reflective aluminium. iron sheet much preferable
 bed lifters wobble wildly. caps fixed that.
 hex mesh prevents airflow under work.
 no crossflow of air due to limited inflow
 wildly misaligned aperture on final mirror
 lens dirty with tape test residue on top
 lens UPSIDE DOWN
 airflow valve position is such that it itself impedes flow even when fully open
 'KH' tube - could be just about anything from anywhere really.
 water pump - suspend rather than try to shock absorb
 laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture
 bed alignment
 broken wire in drag chain
 
  

 PSU. ghost lines on scans caused by miswiring.
 PSU, flyback transformer failed and arcing.

dodecahedron
coasters / trivets.

maybe separate logo into outer and inner parts.
stencil for spanner?

test etching in grid form, two factors a time.

-

Wiki

Main room page - add / update photos maybe?

New pages; why and how to join

fusion 101

Main Site

Old content, general livening up. Needs to project active, lively space. Diversity of interests & projects.

Continue grand fishing campaigns.

Policies and Paperwork

Awaiting feedback:

Rules_and_Code_of_Conduct

Keyholder_Policy

Health_and_Safety_Policy

Tool_Usage_Policy

Risk_Assessment

Misc Orphans

Replenishment_Requests

Wishlist

Grants

Doorman , WiP.

Special:LonelyPages

Special:UncategorizedPages

Misc Misc

Demo stuff

Laser

kerf book
coasters/trivets
clock, obviously.
claw - finish design.
simple birdhouse?
panther
sign, claw jar?

printers

marble run
spirograph
music box

http://spaceapi.net/documentation