Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m |
m |
||
| Line 38: | Line 38: | ||
MHAS | MHAS | ||
[6 MDFs, 2 plys] | [6 MDFs, 2 plys] | ||
| − | plaque | + | plaque? |
| + | New planes , 1 mdf. | ||
| + | |||
| + | |||
| + | Mel - fabric, mannequin! | ||
Revision as of 09:36, 9 July 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
bandsaw?
- drill press XY base to mount clamp on.
- mounting options for normal plate. XY compatible?
- router/drill press lift; wedge format? hinged lever?
- https://www.thingiverse.com/thing:2478547
- https://hackaday.io/project/25092/gallery#54352ad35fe17387f1fd4708e54bd023
new cogs/square shaft pick card ballista test box lid? dual laserplys in rails? print holddown WP updates. fb feed broken. needs piwars updates. photo of laser tube? cut church svg enq re van availability vinyl cutter software?
Test viking box on Helios for 6mm - new setup should make it more efficient. pin joints possible? kerf bending an option now? clean lens and check orientation ramp focal test on Selene, 20-16mm. https://www.thingiverse.com/thing:2704046/files
Doorman 1.5 ply Propaganda stands: 1 mdf
MHAS [6 MDFs, 2 plys] plaque? New planes , 1 mdf.
Mel - fabric, mannequin!
test ebonizing; shougi , dye, then both! engraving dying, aging?
basic box types, demo cuts. 5cm etc. new clock gears. ballista faffery skybox lid & insert inventor unwrapping test cnc with solid block, box carving? pathing needed.
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- T bar model needs prepping
laser;
- check alignment
- test high power defocussed scanning doing something
- calibrate output when possible.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing. haft jig? design housing for hummingbird - test slotted springsteel snippet grafting onto metal & efficiacy
coin sorter - dxf etc
plxicorns treeshelf
-
Laser: russ re calibration etc. display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.
unipede etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card
laser blog post; Laser; bed, flexible, reflective aluminium. iron sheet much preferable bed lifters wobble wildly. caps fixed that. hex mesh prevents airflow under work. no crossflow of air due to limited inflow wildly misaligned aperture on final mirror lens dirty with tape test residue on top lens UPSIDE DOWN airflow valve position is such that it itself impedes flow even when fully open 'KH' tube - could be just about anything from anywhere really. water pump - suspend rather than try to shock absorb laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture bed alignment broken wire in drag chain PSU. ghost lines on scans caused by miswiring. PSU, flyback transformer failed and arcing.
dodecahedron coasters / trivets.
maybe separate logo into outer and inner parts. stencil for spanner?
test etching in grid form, two factors a time.
-
Wiki
Main room page - add / update photos maybe?
New pages; why and how to join
fusion 101
Main Site
Old content, general livening up. Needs to project active, lively space. Diversity of interests & projects.
Continue grand fishing campaigns.
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
Demo stuff
Laser
kerf book coasters/trivets clock, obviously. claw - finish design. simple birdhouse? panther sign, claw jar?
printers
marble run spirograph music box
