Difference between revisions of "User talk:Areid"

Revision as of 05:01, 7 May 2018

Notes:

https://www.popularwoodworking.com/projects/drawer-helpers
http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/

• drill press XY base to mount clamp on.
• mounting options for normal plate. XY compatible?
• router/drill press lift; wedge format? hinged lever?
• calibrate depth cubes
• tuck racking - BT?

new cogs/square shaft
pick card
ballista test
box lid? dual laserplys in rails?
print holddown
WP updates. fb feed broken. needs piwars updates.
photo of laser tube?
cut church svg
cut A5 stand out
enq re van availability
vinyl cutter?

basic box types, demo cuts. 5cm etc.
new clock gears.
ballista faffery
skybox lid & insert

plan laser area & supports

find: sewing kit, glasses cloth. isopropanol?

table saw;

• Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
• zero clearance inlay, test.
• sled
  • runners
  • T bar model needs prepping

laser;

• check alignment
• test high power defocussed scanning doing something
• calibrate output when possible.
  • test optimal focal point - top left THEN others.

vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.

coin sorter - dxf etc

spring test bits

plxicorns
treeshelf

laser blog post / annotate photograph of laser

-

Laser:
russ re calibration etc.
display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.

unipede
port spirograph to dxf format
etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card

blog post.


Laser;
 bed, flexible, reflective aluminium. iron sheet much preferable
 bed lifters wobble wildly. caps fixed that.
 hex mesh prevents airflow under work.
 no crossflow of air due to limited inflow
 wildly misaligned aperture on final mirror
 lens dirty with tape test residue on top
 lens UPSIDE DOWN
 airflow valve position is such that it itself impedes flow even when fully open
 'KH' tube - could be just about anything from anywhere really.
 water pump - suspend rather than try to shock absorb
 laser aimer useless at other focal depths; crosshair or led ring the laser entry aperture
 
  

 PSU. ghost lines on scans caused by miswiring.
 PSU, flyback transformer failed and arcing.

dodecahedron
coasters / trivets.

maybe separate logo into outer and inner parts.
stencil for spanner?

test etching in grid form, two factors a time.

-

Wiki

Main room page - add photos maybe?

New pages; why and how to join

fusion 101

Main Site

Old content, general livening up. Needs to project active, lively space. Diversity of interests & projects.

Continue grand fishing campaigns.

Policies and Paperwork

Awaiting feedback:

Rules_and_Code_of_Conduct

Keyholder_Policy

Health_and_Safety_Policy

Tool_Usage_Policy

Risk_Assessment

Misc Orphans

Replenishment_Requests

Wishlist

Grants

Doorman , WiP.

Special:LonelyPages

Special:UncategorizedPages

Misc Misc

Demo stuff

Laser

kerf book
coasters/trivets
clock, obviously.
claw - finish design.
simple birdhouse?
panther
sign, claw jar?

printers

marble run
spirograph
music box