Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m |
m |
||
| Line 10: | Line 10: | ||
* drill press lift; <> format? modify and reprint midlift | * drill press lift; <> format? modify and reprint midlift | ||
* calibrate depth cubes | * calibrate depth cubes | ||
| − | |||
* print cyclone exit cap , mod fan etc etc. | * print cyclone exit cap , mod fan etc etc. | ||
* make/bodge hose entry from tubery. | * make/bodge hose entry from tubery. | ||
* cyclone; inlet, overflow/, outlet. assemble base/. | * cyclone; inlet, overflow/, outlet. assemble base/. | ||
| + | * tuck racking | ||
| + | * model cyclone inlet | ||
| + | |||
| + | pallet cracker 2 | ||
Revision as of 23:19, 18 March 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
- quick wooden fingers for routing etc, kerfhinge+tape?
- drill press clamp XY base to mount press on.
- mounting options for normal plate. XY compatible?
- drill press lift; <> format? modify and reprint midlift
- calibrate depth cubes
- print cyclone exit cap , mod fan etc etc.
- make/bodge hose entry from tubery.
- cyclone; inlet, overflow/, outlet. assemble base/.
- tuck racking
- model cyclone inlet
pallet cracker 2
router table;
- set up with a working router!
- sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
- screw thread lift, <> format again? m6 based.
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- T bar model needs prepping
laser;
- check alignment
- make tapered measurement jigs and mark with stripe width
- test high power defocussed scanning
- calibrate output when possible.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow center dialing.
Wiki
Main room page - add photos maybe?
New pages; palletry, why and how to join?
Main Site
Dead links
Old content, general livening up. Needs to project active, lively space vs just-about-moving.
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
'Main Room' needs a wiki page. In particular there are a handful of stray pages only linked via categories and something has to tie them together. The 'Equipment' category is about as readable as a dictionary.
Likewise the main page itself is borderline empty.
