Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m (→Demo stuff) |
m |
||
| Line 5: | Line 5: | ||
| − | |||
* drill press XY base to mount clamp on. | * drill press XY base to mount clamp on. | ||
* mounting options for normal plate. XY compatible? | * mounting options for normal plate. XY compatible? | ||
| − | * drill press lift; wedge format? | + | * router/drill press lift; wedge format? hinged lever? |
* calibrate depth cubes | * calibrate depth cubes | ||
| − | |||
| − | |||
* tuck racking - BT? | * tuck racking - BT? | ||
* pallet cracker 2 | * pallet cracker 2 | ||
| Line 18: | Line 15: | ||
router table; | router table; | ||
* sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset? | * sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset? | ||
| − | * wedge router lift, m6 based. | + | * wedge router lift, m6 based. hinge? |
| − | |||
| − | |||
| − | |||
| Line 47: | Line 41: | ||
plxicorns | plxicorns | ||
treeshelf | treeshelf | ||
| + | |||
| + | shelf for table saw jigs, featherboards etc | ||
| + | same for bandsaw | ||
| + | |||
| + | |||
| + | laser blog post / annotate photograph of laser | ||
| + | |||
- | - | ||
Revision as of 22:30, 8 April 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
- drill press XY base to mount clamp on.
- mounting options for normal plate. XY compatible?
- router/drill press lift; wedge format? hinged lever?
- calibrate depth cubes
- tuck racking - BT?
- pallet cracker 2
router table;
- sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
- wedge router lift, m6 based. hinge?
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- T bar model needs prepping
laser;
- check alignment
- test high power defocussed scanning doing something
- calibrate output when possible.
- test optimal focal point - top left THEN others.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.
coin sorter - dxf etc
spring test bits small box for cash/jam?
plxicorns treeshelf
shelf for table saw jigs, featherboards etc same for bandsaw
laser blog post / annotate photograph of laser
-
Laser: russ re calibration etc. display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.
unipede port spirograph to dxf format etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card http://msraynsford.blogspot.co.uk/2016/09/shark-kits.html one panther.
dodecahedron coasters / trivets.
maybe separate logo into outer and inner parts. stencil for spanner?
test etching in grid form, two factors a time.
-
printers: post photos of the calibration tests, distil feedback.
Wiki
Main room page - add photos maybe?
New pages; why and how to join
fusion 101
Main Site
Dead links
Old content, general livening up. Needs to project active, lively space vs just-about-moving.
Launch grand fishing campaign once site/s livened up.
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
Demo stuff
Laser
kerf book coasters/trivets clock, obviously. claw - finish design. simple birdhouse? panther sign, claw jar?
printers
marble run spirograph music box
