User talk:Areid

From ipswichmakerspace
Revision as of 17:40, 2 April 2018 by Areid (Talk | contribs)

Jump to: navigation, search

Notes:

https://www.popularwoodworking.com/projects/drawer-helpers
http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/


  • quick wooden fingers for routing etc, kerfhinge+tape?
  • drill press XY base to mount clamp on.
  • mounting options for normal plate. XY compatible?
  • drill press lift; wedge format?
  • calibrate depth cubes
  • print cyclone exit cap , mod fan etc etc.
  • cyclone; inlet, overflow/, outlet. assemble base/.
  • tuck racking - BT?
  • pallet cracker 2


router table;

  • sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
  • wedge router lift, m6 based.


http://www.exportandgeneral.co.uk/hackspace-community-group-insurance.php
https://www.zurich.co.uk/en/charity-insurance/ppc/mens-shed-and-hack-space


table saw;

  • Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
  • zero clearance inlay, test.
  • sled
    • runners
    • T bar model needs prepping

laser;

  • check alignment
  • test high power defocussed scanning doing something
  • calibrate output when possible.
    • test optimal focal point - top left THEN others.

vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow centre dialing.

coin sorter - dxf etc
spring test bits
small box for cash/jam?
plxicorns
treeshelf

-

Laser:
russ re calibration etc.
display stand for 3d & laser stuff. tree format or curved spine shelf? test 360 laser export modes.
unipede
port spirograph to dxf format
etch / burn test, compact. ; clean cut, stiff cut, etch, engrave test card

http://msraynsford.blogspot.co.uk/2016/09/shark-kits.html
one panther.


dodecahedron
coasters / trivets.
maybe separate logo into outer and inner parts.
stencil for spanner?
test etching in grid form, two factors a time.

-

printers:
post photos of the calibration tests, distil feedback.

Wiki

Main room page - add photos maybe?

New pages; why and how to join


Main Site

Dead links

Old content, general livening up. Needs to project active, lively space vs just-about-moving.

Policies and Paperwork

Awaiting feedback:

Rules_and_Code_of_Conduct

Keyholder_Policy

Health_and_Safety_Policy

Tool_Usage_Policy

Risk_Assessment




Misc Orphans

Replenishment_Requests

Wishlist

Grants


Doorman , WiP.

Special:LonelyPages

Special:UncategorizedPages

Misc Misc

Demo stuff

Laser

kerf book
coaster
hinged box
clock, obviously.

printers

marble run
crossbow
spirograph
music box
makerfair bot ?