Difference between revisions of "User talk:Areid"
From ipswichmakerspace
m |
m |
||
| Line 8: | Line 8: | ||
* drill press clamp XY base to mount press on. | * drill press clamp XY base to mount press on. | ||
* mounting options for normal plate. XY compatible? | * mounting options for normal plate. XY compatible? | ||
| − | * drill press lift; | + | * drill press lift; wedge format? |
* calibrate depth cubes | * calibrate depth cubes | ||
* print cyclone exit cap , mod fan etc etc. | * print cyclone exit cap , mod fan etc etc. | ||
| Line 16: | Line 16: | ||
* model cyclone inlet | * model cyclone inlet | ||
* pallet cracker 2 | * pallet cracker 2 | ||
| − | * test | + | * test removing aluminium laminate |
router table; | router table; | ||
| − | |||
* sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset? | * sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset? | ||
| − | * | + | * wedge router lift, m6 based. |
| Line 34: | Line 33: | ||
laser; | laser; | ||
*check alignment | *check alignment | ||
| − | + | *test high power defocussed scanning doing something | |
| − | *test high power defocussed scanning | + | |
*calibrate output when possible. | *calibrate output when possible. | ||
Revision as of 00:31, 21 March 2018
Notes:
https://www.popularwoodworking.com/projects/drawer-helpers http://fixthisbuildthat.com/diy-flip-top-tool-stand-plans/
- quick wooden fingers for routing etc, kerfhinge+tape?
- drill press clamp XY base to mount press on.
- mounting options for normal plate. XY compatible?
- drill press lift; wedge format?
- calibrate depth cubes
- print cyclone exit cap , mod fan etc etc.
- make/bodge hose entry from tubery.
- cyclone; inlet, overflow/, outlet. assemble base/.
- tuck racking
- model cyclone inlet
- pallet cracker 2
- test removing aluminium laminate
router table;
- sled; small holder sliders , hold down clamps behind. rotatable 90 degrees for end trimming. screw adjustable fence offset?
- wedge router lift, m6 based.
table saw;
- Featherboard? evaluate strength of runners. stacked or thicker mdf? test offset cutting.
- zero clearance inlay, test.
- sled
- runners
- T bar model needs prepping
laser;
- check alignment
- test high power defocussed scanning doing something
- calibrate output when possible.
vertical hole drilling jig. paralellerellel fence/guide, CLS hinged atop with a range of hole sizes pressed through widthways. lockable hinge to allow center dialing.
Wiki
Main room page - add photos maybe?
New pages; palletry, why and how to join?
Main Site
Dead links
Old content, general livening up. Needs to project active, lively space vs just-about-moving.
Policies and Paperwork
Awaiting feedback:
Misc Orphans
Doorman , WiP.
Misc Misc
Demo stuff
Laser
kerf book coaster hinged box clock, obviously.
printers
marble run crossbow spirograph music box makerfair bot ?
