Difference between revisions of "User:Leachj"
m |
m (→Requisition requests) |
||
| Line 27: | Line 27: | ||
'''Acrylic paints''' - wilko acrylic 200ml tubes are very good value. A full range would cost £21 (each tube is about £2) but we would 'donation cost' at about say 50p per shot glass (30ml ish) to re-fund that. Example: https://www.wilko.com/en-uk/wilko-lets-create-acrylic-paint-cerulean-blue-200ml/p/0415362 - Again I can get when passing. | '''Acrylic paints''' - wilko acrylic 200ml tubes are very good value. A full range would cost £21 (each tube is about £2) but we would 'donation cost' at about say 50p per shot glass (30ml ish) to re-fund that. Example: https://www.wilko.com/en-uk/wilko-lets-create-acrylic-paint-cerulean-blue-200ml/p/0415362 - Again I can get when passing. | ||
| − | Halfway decent brush set - I've given us some really basic ones, there's a midrange 15 piece set for £2 in B&M currently. | + | Halfway decent brush set - I've given us some really basic ones, there's a midrange 15 piece set for £2 in B&M currently which might be worth rescuing. |
| − | + | ||
| − | + | ||
'''Sewing / fabric''': https://www.ebay.co.uk/itm/Travel-Home-Sewing-Kit-Case-Needle-Thread-Tape-Scissor-Set-Handcraft-Z/282678320996 | '''Sewing / fabric''': https://www.ebay.co.uk/itm/Travel-Home-Sewing-Kit-Case-Needle-Thread-Tape-Scissor-Set-Handcraft-Z/282678320996 | ||
Revision as of 21:32, 15 June 2018
Contents
Semi urgent tasks:
A costed list from Amazon et al of what else we might want as 'house stock' for laser materials; Wishlist#Materials_.2F_Consumables <-- Amazon Plywood costing is needed still. Is anything else needed there? Do we need another security camera or are we going to see how things unfold first?
Could we get Navbox here to aid page unity? Top of https://en.wikipedia.org/wiki/Template_talk:Navbox for installation instructions. Much appreciated!
Bandsaw
Update: liase/nag Steve about returning the feeble thing
Fairly sure this is the bearing type we need for the bandsaw , however I have no idea how we can remount it to the shaft; https://simplybearings.co.uk/shop/advanced_search_result.php?dd_data=%7B%221%22%3A%220%22%2C%222%22%3A%220%22%2C%223%22%3A%220%22%2C%2217%22%3A%220%22%2C%2219%22%3A%220%22%2C%2220%22%3A%220%22%2C%2221%22%3A%220%22%2C%2222%22%3A%220%22%2C%2223%22%3A%220%22%2C%2224%22%3A%220%22%2C%2225%22%3A%220%22%2C%2228%22%3A%220%22%2C%2229%22%3A%220%22%2C%2230%22%3A%22TWV0YWwgU2hpZWxkZWQ%3D%22%2C%2231%22%3A%220%22%2C%2232%22%3A%220%22%2C%2233%22%3A%220%22%2C%2244%22%3A%220%22%2C%2276%22%3A%220%22%2C%2277%22%3A%220%22%2C%2281%22%3A%220%22%7D&keywords1=5&keywords2=16&keywords3=Width&keywords=5x16x%205x16%2016x5x%2016x5%20x16x5%20x5x16%20&_=1520754401872
Requisition requests
Consumaterials:
Card and paper, needs an inbox tray for storage. Ikea would be ideal!
Best value mixed colour sets I can find: https://www.ebay.co.uk/itm/A4-CARD-MEGAPACK-250-SHEETS-10-X-25-COLOURS-SUPPLIED-IN-A-WESTON-STORAGE-BOX/401055120582 https://www.ebay.co.uk/itm/A4-Assorted-Paper-500-Sheet-Ream-Supplied-Weston-Storage-Box-25-colours-/381519651295
White, black & metalised card, and tissue paper, it seems better to get in person from wilko (which I'll do next time I'm passing), until demand requires bulk buys. If people get into pepakura then 220gsm white card will be eaten very rapidly!
Acrylic paints - wilko acrylic 200ml tubes are very good value. A full range would cost £21 (each tube is about £2) but we would 'donation cost' at about say 50p per shot glass (30ml ish) to re-fund that. Example: https://www.wilko.com/en-uk/wilko-lets-create-acrylic-paint-cerulean-blue-200ml/p/0415362 - Again I can get when passing.
Halfway decent brush set - I've given us some really basic ones, there's a midrange 15 piece set for £2 in B&M currently which might be worth rescuing.
Sewing / fabric: https://www.ebay.co.uk/itm/Travel-Home-Sewing-Kit-Case-Needle-Thread-Tape-Scissor-Set-Handcraft-Z/282678320996
Data:
Blank CDs, DVDs; I have a fair few which I'll bring in, as does Steve apparently. low capacity USB sticks ? Might be worth getting some 4gb ones.
Laser:
Some more acorn nuts would be useful, I think we have M8 presently? https://www.ebay.co.uk/itm/Car-Large-Angle-300mm-Curved-On-Rear-View-Anti-glare-Convex-Mirror-Universal/302394353012
Laser switch - I assume it can handle the throughput? Blue cover & green LED is in stock atm https://www.ebay.co.uk/itm/illuminated-LED-Toggle-Switch-Missile-Style-Flick-Flip-Cover-12V-12-Volt-20A/182870884973?hash=item2a93f4426d:m:m552oksPX4AGrht3XPGChqQ
However we also need a new nozzle to house it in. Reason being we'll have to graft a metal tube onto it to carry the air assist down over that distance. Depending on the 4" one, we may later want a 7.5" as well, which would also need a different nozzle. The effective cutting profile for that would be about an inch! The kerf is wider though, and the beam profile 'rougher'. 4" is a good kerf/depth compromise, it's more like a jigsaw than a sabre saw.
Likely head candidate: https://www.aliexpress.com/store/product/Cloudray-CO2-Laser-Head-Set-for-2030-4060-K40-Laser-Engraving-Cutting-Machine/1513187_32836741034.html?spm=2114.12010612.0.0.68db1f536tgNRp
Tool cart requirements:
- Casters
- Tool clips
- Rare earth magnets
Dealer's choice as to varieties. No rush either as we ideally need to wait until we have our own hand tool set before constructing this. Speaking of tools, please review / add to the workshop hand tool list.
(You may wish to watch Replenishment_Requests when we get enough people using it.)
Misc reminders
Relay socket - would be lovely if possible?
New pages to review
(there are more but some aren't finished yet)
Kitchen and Main_Room (BOTH NEW) would appreciate help fleshing these two out a bit
Maintenance (NEW)
New_Member_Guide (NEW)
Replenishment_Requests newish but updated recently
Donations (new but nothing that new. tl:dr; check we actually want stuff first, especialy big or scary stuff)
Documentation to review
Tool_Usage_Policy (updated again to read as user-friendly)
Keyholder_Policy (NEW)
Health_and_Safety_Policy (updated slightly)
Documentation to create
Shutdown checklist
- The 2D printer should probably feature on it
